1/48 Tamiya F-4B Phantom 11

1/48 Tamiya F-4B Phantom 11 - Doing Lines

Рет қаралды 17,711

Doogs Models

Жыл бұрын

This episode's all about lines - specifically heat shielding lines and panel lines. And a six month time jump. Woot!

Пікірлер: 64

@BarricaG Жыл бұрын

Good to see this channel up and running again. This is an impressive project, good job!

@01Sassoon Жыл бұрын

Glad to see you back and posting, Matt !! Another good episode.

@petermerz2704 Жыл бұрын

Looking good! Love the back end. Thanks for sharing. 😎🇨🇦

@patkeegan7439 Жыл бұрын

Awesome work, good to see your well and back on the tools mate! Can’t wait to see the Bronco 👍

@normanlong2191 Жыл бұрын

Great show Matt and good to see ya back man !

@joelhiggins6156 Жыл бұрын

Glad to see you made it through all those life hurdles and were able to get back to the bench!

@bamibal001 Жыл бұрын

It's a pleasure hearing that compressor again.

@seananthonyegan3395 Жыл бұрын

Welcome back you have been sadly missed I hope you are feeling better now. 👍😁

@jamescheung2527 Жыл бұрын

Good to see you again. Great job

@paulwoods4349 Жыл бұрын

Greetings, Matt. I love your videos; you are an awesome building reference!

@michaelnaven213 Жыл бұрын

Welcome back Matt! Missed your outstanding work.

@joebringas4807 Жыл бұрын

Damn bro I hope you are doing better my man. Was wondering what happened to the updates. Glad you are back. Stay safe.

@malcolmmacdougall 9 ай бұрын

wow that looks good, especially your panel lines, you're one of the few that's got this right.... i remember when i saw the Vulcan bomber at St Athan, it had no weathering along the panel likes, it's panel lines were clean... it was just sort of dusty and slightly dirty all over; that's all......

@douglaskeane1792 Жыл бұрын

Good to see you back at the bench Matt

@MegaDave1962 Жыл бұрын

looks beautiful and good technics to follow A++++++++++

@jfn480427 Жыл бұрын

Waiting for your videos, finally you started gin, congrats!

@patricktim140 Жыл бұрын

Thanks from France

@mister10x54 Жыл бұрын

amazing good sir greets from germany keep going

@paulmanuse2353 Жыл бұрын

Badass!!!

@allanrichards3752 Жыл бұрын

Good to see you back. I find I have to finish one kit at a time. If I put a kit back in the box I will never go back to it, it stays on the shelf for years and then gets binned. I looked at the 1/16 scale Sherman, but they are big models and take up a lot of real estate to display them. I think for an Easy 8 a good kit with full interior is the 1/35 RFM offering.

@DoogsModels Жыл бұрын

I just can't have one kit on the go - I've found it leads to dark places. And yeah, agree that the RFM Easy Eight is pretty nice.

@malcolmmacdougall 9 ай бұрын

i've got a 1/16 king tiger diorama and it's huge, but it does look awesome on a big scale, haven't finished it yet

@michaelwalsh7437 Жыл бұрын

I have this kit in my stash, but this level of detail is actually scaring me off.

@40ftinc.42 Жыл бұрын

Again, so good to see you back. A general question, what is the function/advantage of the Rapid Thinner as opposed to MLT or others?

@DoogsModels Жыл бұрын

MRT flashes faster which reduces spidering and also curves paint somewhat slightly flatter.

@michaelwalsh7437 Жыл бұрын

You’re certainly committed Matt. Jesus

@michaelnaven213 Жыл бұрын

Damn Matt you really have been through the 💩of life. Certainly hope life gets better for you.

@DoogsModels Жыл бұрын

Nah. In the broad scheme of things I'm pretty fortunate. Definitely had a pile-on for awhile there this year though.

@thomasflynn198 Жыл бұрын

Finally back again! That's great Matt. Sorry to hear of you being laid off. Have you considered doing commission work? If so, I'm interested.

@DoogsModels Жыл бұрын

Thanks! Been back on my feet nearly 3 months now - no plans for commission work. Takes the fun out of it.

@gadeeshi Жыл бұрын

Looking forward to ICM's OV-10 Bronco video build!

@DoogsModels Жыл бұрын

It's not getting one. It was done for a book www.insidethearmour.com/product-page/models-for-ukraine-vol-2-preorder

@davidpalmer4184 Жыл бұрын

Hi Matt, It's good to see you returning from all of your issues. I hope your life is better. Silly question, when you used the GX113 matt coat what was the ratio of the leveling thinner that you used. I have been a big fan since watching "The Flankoff" You helped me a lot.

@DoogsModels Жыл бұрын

About 1:1 or maybe 60% thinner.

@martinslovak6094 Жыл бұрын

if you want a really "FLAT" flat, go for Hataka lacquer - it does not frost surface as the Tamiya lacquers and feels better to me then the GX113 (which was my favourite before I found the Hataka one) ;-)

@raymondrosario9893 Жыл бұрын

Hey Matt...sounds like you have had a challenging past few months. Glad to see you are back and doing better. Again, great work on the Phantom...every so often, l will look at mine and think...soon...soon. I had a question and if it sounds basic, please forgive me. When you're sanding the decals to remove the carrier film, you're not actually taking it away. Is it just to level the clear coat and blend it into the film? Also what grit sponge are you using? I am guessing 600...a worn 600?

@DoogsModels Жыл бұрын

Exactly. The carrier film's not going away (unless you burn through it...). But the clear and sand reduces the height difference between the carrier film and surface, effectively hiding it. And 1000 grit.

@lowenization Жыл бұрын

woo!

@WarpedHorizon Жыл бұрын

Great to have you back! How did you like the ICM Bronco? Will you do a video on it?

@DoogsModels Жыл бұрын

Nope - it was for a book/good cause: www.insidethearmour.com/product-page/models-for-ukraine-vol-2-preorder

@DoogsModels Жыл бұрын

Overall I liked it though. There are a few weak spots - the main gear struts are floppy, the lack of an open canopy is kinda weak - but for the most part it's a well thought out and executed kit.

@johndillon8051 Жыл бұрын

Looks great! Do you remember what grit you were using to knock down the carrier film?

@DoogsModels Жыл бұрын

1000 I believe

@southpaw5483 Жыл бұрын

Any thoughts on Tamiya Panel Line fluid instead of Mr.Hobby?

@richelias2973 Жыл бұрын

Good to see you back. Can you tell me what model airbrush you are using and is that one you would recommend. Thanks

@DoogsModels Жыл бұрын

My general workhorse is the GSI PS-267. I also use a PS-771 for detail work and a PS-290 for wide area stuff like priming. Absolutely love all three and that's after trying airbrushes from most of the major brands (H&S, Badger, Paasche, Iwata, Grex).

@richelias2973 Жыл бұрын

Thanks for the info

@CJ-jh9ri Жыл бұрын

Anybody catch the brand of the scribes Matt used to deepen the panel lines?

@DoogsModels Жыл бұрын

They're from Radu Brinzan's shop which I think has since closed its doors. Their just like mini PE scriber/file things. I'm sure someone like UMM or whoever has something similarish.

@dennisdilmore7115 Жыл бұрын

Details on that scribes please.

@johndillon8051 Жыл бұрын

And BTW, I've been working on the 1/16 StuG that Andy brought in about a year ago and its been a real slog. I just want to get it done and move on. Last 1/16 armor model I build.

@michaelnaven213 Жыл бұрын

Andy just released the Tiger I for preorder.

@ChristianGurney Жыл бұрын

Honest feedback - not a fan of TikTok. I enjoy your content here and on FB.

@inspiredlife9315 Жыл бұрын

Get a wireless lapel mic like Rode and the settings can block out background noises.

@DoogsModels Жыл бұрын

Tried it and nope. If anything it's worse since lavs are omnidirectional.

@HotelPapa100 Жыл бұрын

"Shut up, AC"

@timf3099 7 ай бұрын

One of the things that makes decals annoyingly obvious is that they're just way too perfect. No blurriness or imperfections. Black is PURE Black. Just too fucking *crisp*. I'm personally trying work around old, bad habits, and include a decal-weathering step to my process to make the decals blend better...