$1000/Job Unbelievable Ceramic Coating Application | Simple & Profitable Value Adds!

No video

$1000/Job Unbelievable Ceramic Coating Application | Simple & Profitable Value Adds!

Рет қаралды 110,781

Күн бұрын

$1000/Job Ceramic Unbelievable Coating Application | Simple & Profitable Value Adds!
In this video I show every part of the ceramic coating application process, but I also show how you can literally make $1000 per day applying ceramic coatings combined with the right communication skills with your customer. $1000/job might seem out of reach, but here we talk about simple and profitable value adds that a ceramic coating will bring to a customer to create the ultimate win win for you and your customer.
Ceramics:
Nasiol Ceramic Coating: amzn.to/2Bywldz
Nasiol Windshield Rain Repellent Wipes: amzn.to/2YoCked
Products:
Tire & Wheel Well Cleaner: amzn.to/2NidSov
Wheel Cleaner: amzn.to/2zSXRSH
Foam Cannon Soap: bit.ly/3fT17h5
Optimum Power Clean: amzn.to/2V7Cch4
Optimum Car Wash Soap: amzn.to/2NxJ4jP
Optimum No Rinse (Clay Lube) amzn.to/3eui4NO
Iron Remover: amzn.to/3eCkSIZ
Optimum Paint Prep: bit.ly/2Tc56uv
Optimum Hyper Polish: bit.ly/3c47egP
Tire Dressing: amzn.to/3hOGUKh
Wheel Ceramic Spray: amzn.to/2V7EvRg
Tools:
Rupes DA Polisher: amzn.to/2YabINI
Polishing Pad: bit.ly/2YxuGyh
Electric Pressure Washer: amzn.to/2NnB6cR
Long Handle Wheel Well Brush: amzn.to/3dt0tEC
Wheel Brush: amzn.to/316n07O
Detail Brushes: bit.ly/31qBqxz
Foam Cannon: amzn.to/317cEV2
Detail Cart: bit.ly/3f4vBeU
Buckets: bit.ly/3cBe50H
Grit Guard: amzn.to/2NmWr6c
Wash Mitt: bit.ly/37PLcMS
Drying Towel: bit.ly/2Xsnbqy
Clay Bar: amzn.to/2Z4Z02m
Microfiber Towels (Low GSM) bit.ly/37Wj6yY
Ultra Plush Microfiber Towels (High GSM) bit.ly/2tpKp5w
Gloves: bit.ly/2MGOuIu
Spray Bottles: bit.ly/3elNfKW
Spray Triggers: bit.ly/2TCqCtD

Пікірлер: 288

@willfuller7177 4 жыл бұрын

Luke, thanks for the great information. I’ve been detailing for about 20 years now and I have learned quite a bit from you. In the kindest way possible I’d like to give you a tip since I’ve gotten so many from you. Don’t forget to take the license plate off the back of the car, the paint behind the plate needs love too. Thanks again for all the valuable info, I’ll continue to watch AND like your videos...keep them coming.

@arrozconmgtow5026 Жыл бұрын

I've busted two members of my competition for the license plate thing. I remove the plate every time, without fail. If I have to break the screws to get the plates off I don't care...I replace them. I'm set up for that sort of thing.

@TonyHarlan 4 жыл бұрын

As a 43yo detailer whose been detailing for over a decade, please do me a favor... Please get yourself a couple IK sprayers for your brake buster and APC. Not only will it save you time on every detail, but it'll save your fingers all dang day. Great video man, loving this informative content.

@wilsonautodetailing 4 жыл бұрын

Haha I've got some pump sprayers I love using and yes you're right, it definitely saves a lot of time, but I believe they were full of something else when I was getting this done

@jasgill7412 3 жыл бұрын

this man is ledgend, this video was probably sooo hard to make, its such a long vid yet the quality was a 10 the whole time. getting right angles for us, switching batteries, so much, thanks g

@gl8266 4 жыл бұрын

Awesome video my friend. I want to thank you for all the incredibly helpful information. I'm a 20 year automotive refinishing technician and I'm just starting my detailing business. That being said, your videos have helped so much and I just can't thank you enough...Great work!!

@wilsonautodetailing 4 жыл бұрын

incredible! Thank you for watching man! Really glad to hear that

@waterheaterservices 3 жыл бұрын

Sweet Audi.... Scotty Kilmer would like to say something.... 😆

@R0cketRed 4 жыл бұрын

Absolutely best car detailing channel for beginners and experts! Your the ONLY one that puts there price out there with no secrets. Love u bro, you have helped me price my first 2 step correction.

@cedricwebb5576 Жыл бұрын

Dude!!!! I been watching you for years.. you always deliver. Happy New Year and God bless you Bro.

@HobbyistPrinter 4 жыл бұрын

Your content has literally grown with me. I've learned how to be more efficient when I needed it and now how to be more profitable thanks to the new format.

@wilsonautodetailing 4 жыл бұрын

So great! Love that it is working for you man!

@lasilveira805 4 жыл бұрын

First time I seen someone detail the exact color and Audi SUV I own 🥰♥️ We haven't had ceramic coating on it yet, but my paint looks like when we left the showroom 🤩 My SUV sits in the sun as well, but we wash it weekly and use a spray wax every wash and or polish it once a month or so. My interior still smell new and its a 2018. When I take it in to maintenance, the service writer says my car is in brand new condition. I have 3 sons and they make sure their shoes are dusted off before entering my car and we don't eat in our car either, only water or non staining drinks lol 😆 👌 Nice work 👏

@foxbodyboys4483 4 жыл бұрын

Thanks for the awesome video.. appreciate you taking time to share your knowledge! God bless

@wilsonautodetailing 4 жыл бұрын

Absolutely, thanks for watching man!

@user-fv7to6yi2w 5 ай бұрын

Great job!!! Exactly thats what that type of job cost, minimum $1000 bucks. I used to do same job youre doing for $11 dollar per hour, except ceramic coating. Wash 80 cars in 10 to 12 hours. And not only that .many, many more things, and With out the right to drink water.

@Josue19892010 2 жыл бұрын

Nice Video my Friend! Congratulations!!! Good Job! I love! ;) 🙌

@dr.shahid3244 4 жыл бұрын

Awesome. You Have Added Life To This Vehicle's Genuine Paint, Windshield, Headlights And Aluminium Alloys. You And Your Customer Knows The Value And You Knows The Process of Ceramic Coating. Two Thumbs Up. Great Job Manl

@dr.shahid3244 4 жыл бұрын

"Keep Working Hard" Is The Key Guys!!

@wilsonautodetailing 4 жыл бұрын

Thanks man!

@thenaturalstategardenerflo7958 Жыл бұрын

your great dude if no one believes it you do for sure

@HarleySantanass 2 жыл бұрын

Top-notch Job my friend. well done. Thanks for sharing your passion at this level.

@MyNameJeff-ck4sb 4 жыл бұрын

Great video! You’re motivating me to grow my business. Love seeing the products you use and strategies you use to get vehicles done quickly.

@desifrazier6860 3 жыл бұрын

I really like that you show people how to make money thanks for all your time sharing love it

@MrDoM2K9 4 жыл бұрын

You've quickly become my favourite Car detailing KZfaqr, you're content is so educational rather than just being aesthetically pleasing to watch. Im launching my business as we speak, starting out doing valeting but I want to be a professional detailer! Had my first customer on the weekend and he was very happy with the results!

@wilsonautodetailing 4 жыл бұрын

Incredible! Thanks for the feedback man! I am definitely a lot more passionate about teaching than necessarily making cool videos so that is going to attract some and not others. I think for guys like you who are actually in the business it is probably going to be helpful! Thanks again Dom

@MrDoM2K9 4 жыл бұрын

@@wilsonautodetailing Keep pumping them out I'm learning so much from you! You're an inspiration :)

@nemanjaradonjic_1988 4 жыл бұрын

Well done brotha!!! I enjoy watching your videos. I detail on the side. So I enjoy watching and learning i dont have much like you got but eventually I will. I live in Michigan. One day I'll be like u lol god bless bro

@wilsonautodetailing 4 жыл бұрын

Keep working at it man! Over time it is more than possible!

@Bernhardtautodetailing 4 жыл бұрын

the videos lately have been great! Really helping me think about my business and decide how to move forward

@wilsonautodetailing 4 жыл бұрын

Really glad Isaiah!

@diegovinicius5316 4 жыл бұрын

Thanks from Brazil.

@wilsonautodetailing 4 жыл бұрын

Absolutely!

@olmrmonster580 4 жыл бұрын

I live in west TN and there is no way I could get anyone to pay 1k for a ceramic job. I know the Nashville area has people that make more money than west TN but honestly I couldn’t see charging that much personally. I’ve been detailing for 20 years and to each their own I just couldn’t charge that much.

@michaeljackson6507 3 жыл бұрын

Nice work 👍👍👍👍👍👍

@DK-pr9ny 2 жыл бұрын

Bro you are a work horse! Hope your body can keep up with the demands your profession puts on it! Keep up the great work that Audi looks amazing! Not a fan of the shiny tires though lol.

@kezrolg 2 жыл бұрын

Very nice. Big fan.

@wrbergner 4 жыл бұрын

Hi Luke, chalk up another 'sweet' lesson; this being on prep staging prior to ceramic coating followed by the actual ceramic coat. Now I know you did the entire detail in 10 hours, what is the cure time on the ceramic coating? Most are either 24-48 hours. Do you advise the owner to garage the car when they pick it up? Great job, as always!!!

@Mwap439 4 жыл бұрын

Bill B Same question as well.

@wilsonautodetailing 4 жыл бұрын

Yes absolutely! Keep it in the garage for 48 hours! That's my RULE, and I'm not one to compromise on rules like this

@bigd9848 4 жыл бұрын

Yes perfect to cure in the garage ✊I have a few customers who want me to go through all the work and they want to Keep it outside 🤷🏼‍♂️I warn them about the consequences of not letting it stay garaged. The best place for it and the products are backed by doing it and curing it the proper way 💎🇺🇸

@MrAgustincuenca 4 жыл бұрын

my detailer returned me the car after the cure was done inside his shop, not before. Understand he is not a mobile one, of course. And his advise was, put it outside your garage in direct sunlight to make it shine more during the first week. The cure stage it's important.

@rauljimenezjr9750 4 жыл бұрын

👍 Good Job. All renegade products are the best in the market by far.

@WelcomeToMyHead 4 жыл бұрын

Thanks for all of the info! I love the details of your descriptions :)

@wilsonautodetailing 4 жыл бұрын

Thanks! Glad that they are helpful

@donmonacelli5383 4 жыл бұрын

Wow amazing job!

@wilsonautodetailing 4 жыл бұрын

Thanks Don!

@startingtech3900 4 жыл бұрын

this was a 3k job i forgot what detail shop in chicago charges 3k saw it on YT. you gave her a very good price for 1k bro

@lukewiezycki7550 4 жыл бұрын

Chicago auto pros? Lol

@thatcaddydude4202 4 жыл бұрын

I love your content and you speak complete facts, but sometimes you get a little full of yourself saying “my customers will only choose me i’m the best they only think about me” maybe that is the case, but i’m here for the knowledge not necessarily you being all uppity that you’re the best detailer

@wilsonautodetailing 4 жыл бұрын

I could be wrong, but I don't believe i have said "I'm the best," I believe the conversation is surrounding the fact that the brand I've built in my area at this point causes customers to call me and say 'I don't want anyone else to detail my car, do you have time?" Hopefully you can hear what Im saying and not what Im not saying

@thatcaddydude4202 4 жыл бұрын

Wilson Auto Detailing I gotcha. No hate at all - sometimes just comes off a little harsh to the guys who are really just in their first few months trying to get a grasp of everything!

@holybusiness9624 4 жыл бұрын

Young man this is refreshingly awesome video 💪🏽👍🏽❤️☀️

@gilortiz6254 4 жыл бұрын

Good job

@MtnXfreeride 4 жыл бұрын

My local dealership def doesn't give a crap if it is ceramic coated on a trade in. Im pretty sure they would laugh in your face for asking. You get the KBB rough value on a like new car and they say "thats the market".

@V2STU Жыл бұрын

hey wilson great video, was wandering if you included the price of the ceramic in to the 1000$ price point.

@craigmoir9278 4 жыл бұрын

Eye candy detail man. Killer body. You're a good detailer too!!

@johnayala5366 4 жыл бұрын

Looks like a mirror. Great vid!

@thecarproconnoisseur5412 3 жыл бұрын

I’ve detailed at a Porsche dealership...I 100% guarantee u don’t make your money back..if the paint isn’t perfect, that’s why they had people like me there.. to pay about 1/4 of that to fix it

@user-zt5rq3bo8q 4 жыл бұрын

항상 잘 보고 있습니다~좋은 영상 감사합니다~^^

@SpiritualSymphony. 7 ай бұрын

So you do Compounding and then polishing?

@IknowImNotCrazyYoumightbe 4 жыл бұрын

Great video... Excellent points about avoiding the auto detail mob's criticism

@wilsonautodetailing 4 жыл бұрын

Definitely! Thanks man!

@ejdetailing7189 3 жыл бұрын

What are those 2 soaps you used on the foam cannon and why did u use 2 different ones does it help and or work better or differently

@weaverdetails4747 4 жыл бұрын

I spend three days applying a coating on my personal vehicles. Day 1 wash and Decon, day 2 paint correction, day 3 coating application. To do this all in one day is so tiring and easy to lose focus.

@wilsonautodetailing 4 жыл бұрын

Definitely tiring, but losing focus is a matter of personal bandwidth I think

@oraciogarcialeonjr.2802 4 жыл бұрын

Do you also do the paint inside the doors

@andrewvaldez8783 2 жыл бұрын

Mr Wilson is this your still your ceramic coating you use for all your details or do you use a different one. I seen a more recent video you were using a different product what’s your best one?

@raposobernardo 3 жыл бұрын

hey Luke, I like your videos a lot! Great content. I'm thinking about starting ym own detailing business Do you have any content showing the reason behind so many different products and so many processes? In your video, after the first 15 min, the car looks the same after you use more products. I believe they all have their properties and do different stuff to the car, but can you describe that in a video? Thanks a lot!

@howlettfang242 3 жыл бұрын

If you use Ceramic coatings do you need to use Wax too? If no, Can you use Wax with it or would it damage the ceramic coating? I had never heard of ceramic coatings before so this is a first for me and I am trying to start a detail business so I am curious to know how exactly and ceramic work together or interact with each other.

@rcsmith8162 2 жыл бұрын

How are you doing this out in the sun without getting bad water spots?

@theirishman088 4 жыл бұрын

I detailed for 10 years at a dealership and unfortunately the couple that I worked at could care less about the appearance of the vehicle when it was traded in. The dealer will not give you $1000 bc it is clean bc they are going to detail it anyway. Great content tho. 👍

@charlesbardforth6738 4 жыл бұрын

Dealers want the deal. And if its leased, as long as its not hit, they dont care either. It goes to auction.

@jaredreynolds9419 4 жыл бұрын

I agree having worked at dealerships but you should be able to get that thousand back if you sell it privately, most will pay more if they know it was well taken care of and had a ceramic coat.

@wilsonautodetailing 4 жыл бұрын

I think my point is more this: Like in real estate, the location is going to determine the appraisal value more than anything else, BUT a house that has been renovated recently on the inside is going to peak far more interest for say a first time home buyer than one that is not, and will is many cases drive up the price. That doesn't mean it's going to sell for $20K more than it's worth, but there is absolutely a price tag attached to that. In the same way, a vehicle that is maintained with incredible car is of course more desirable, and that in many ways can cause the same effect when selling

@99zman 3 жыл бұрын

Amazing vid! When doing this vehicle did you do the interior as well or just the outside?

@Ecarney_5 4 жыл бұрын

So first off. I am relatively new to ceramics. I have taken 1 weekend and this is now my second real customer that wants one. The first car I had 18 hours into, you don't exactly work that in a single day at full consciousness. This being my second one I am about 20+ hours into correction. I cannot conveniently get these cars back in a day. To make them absolutely perfect for a ceramic they need to be properly corrected. Am I in the wrong for taking this long to give my customers an honest application of a very expensive product?

@wayniac34 4 жыл бұрын

What kind of cars are you working on?

@99zman 3 жыл бұрын

I struggle with that same thing it takes me 11/12 hrs when doing this. I don’t stop reared for breaks or anything.

@royaltyautodetailing 2 жыл бұрын

So what kind of spider pads do you prefer? Maxshine, Skys the limit?

@nicholasbarker2956 4 жыл бұрын

When does your coarse come out?

@travisdenning9989 3 жыл бұрын

How many cars can you do with that one bottle of coating?

@cgttc0441 4 жыл бұрын

Very nice. Do you put a topper to protect the ceramic during its cure time. As an example reload with car pro Cquartz.

@ojoaomoutinho 2 жыл бұрын

Hi Wilson, everything ok? I have one think in my mind, to try in my vehicle the CERAMIC aplication and after, do the WAX coating. It is the best of the best creation or it doesnt make any diference after the Ceramic?

@mynsxt6 3 жыл бұрын

How do like this one compared to Avalon King? Getting ready to pull the trigger, help me out. My first coating will be the last coat black ice and the this one or avalon king

@jahmilleburgin8951 4 жыл бұрын

Nice work, and info bro! I’m going to try that one out.

@wilsonautodetailing 4 жыл бұрын

Awesome! Let me know how it goes!

@BoSsNexMove 3 жыл бұрын

@@wilsonautodetailing do you use any ceramics from chemical guys ? If so which one would you recommend

@namteiv5564 4 жыл бұрын

Hi Luke, I don't know how to contact you other than to just comment, Have you ever used or reviewed Armor Shield IX Nano Ceramic Coating? I am in Arizona with extreme heat conditions 100-119 degrees just about daily. You literally only have 30 seconds to remove it or to buff off. P.S. I love your channel and usually glance at it everyday for new videos. I have really upped my game this year I want to thank your channel for that . I must say I can't keep up with all of the chemicals.lol I use basic but have been doing this work for many years. Thanks Luke!

@life_motived_corey 4 жыл бұрын

I have never ceramic i bought a bottle but i really dont no what direct to go to apply it. Was gone buy a junk yard hood in a good condition and try it half way. What you think i should do?

@peterjurenovskis5933 4 жыл бұрын

Lots of good information. It looked like during the ceramic process, you were careful not to apply the coating to the silver window trim. Why? Did the sunroof glass panels, rear hatch and side windows get cleaned only?

@wilsonautodetailing 4 жыл бұрын

Good question, I am following up with this car and putting a ceramic on all the glass, so that is when the chrome and pillars will be done, I avoided it in this case because of the prep Ill do with the glass in the future before application

@peterjurenovskis5933 4 жыл бұрын

Wilson Auto Detailing So a follow up question is; when coating glass, the rubber seals get coated as well? I guess it isn’t an issue along the top part of the seal on the side windows, the coating between the rubber and the glass (of where the movement is when you bring the window up/down).

@ladyjust905 3 жыл бұрын

Have you ever used the Avalon king ceramic coating? And if so how did you find the quality, application and cost ratio? Would you use or recommend?

@dakotacostanzo24 4 жыл бұрын

Hey Luke, I have just recently started a mobile detailing business. I’m getting started in ceramics and I have carpros ceramic coating and paint correction. I was wondering if you had any tips on polished, like a good polisher and combination of pads and products to use. There are so many different products to use. I’m wondering if you wouldn’t mind giving me some advice on it! Thank you!

@lukewiezycki7550 4 жыл бұрын

Hopefully it’s not too late but here’s what I’ve had good luck with. A nice polisher you could always get a starter polisher on amazon for $125 it comes with basic pads that will get you going. Then upgrade later on. I really like optimums spray polish. They have a compound, a hyper polish, and a few others. All work well

@nextlevelmobiledetailingllc 4 жыл бұрын

Menzerna 2500, Meguiars 110, Lake country orange foam pad, Lake country microfiber cutting pad. You can get a lot done with just those products. Also I really like CarPro Essence as a final polish, CarPro Eraser before applying coating.

@jonathanritter7364 4 жыл бұрын

Is there enough of this product to apply it to a few cars with 1 bottle?

@afamilythatlaughstogether9881 Жыл бұрын

Why so much pressure with the polisher? Was there a reason to polish?

@jsmctch 4 жыл бұрын

I hope this guy dont charge by the word

@ps238mb 4 жыл бұрын

I never heard of that ceramic coating you suggested. Did you ever try Servfaces Suave or Ultima, Nanolex Si3d HD or Si3d Max or Gtechniq Crystal Serum light or Crystal serum ultra? I highly recommend testing them :)

@psychochops 3 жыл бұрын

Quick question for you sir. I noticed you using a pressure washer and regular water hoes. Are you not using your own supply of water and electricity? Is it like this with all your clients? Please let me know.

@ljguy300 4 жыл бұрын

Drinking game: drink every time he says "simply"

@miragexl007 2 жыл бұрын

Hmm, this video almost convinces me this year about trying Ceramics. Doesn't seem worth it... with the good sealants and waxes now and what people are really willing to pay overall in most areas... but may try it on my own car. Stuff itself is like a hundred and twenty bucks I believe

@frenchmirrordetailing1759 3 жыл бұрын

hi mate, so 1000 dollars it's just for the washing and paint correction of the outside right ? here in france i'm asking 950€ for outside and inside. I wonder if my price is not to low...

@Cardude369 4 жыл бұрын

Subbing been following for a while might get back into detail I stopped before the foam cannon came out lol

@tomaxxamot2016 3 жыл бұрын

You look like the detail geek

@SoulEraser000 4 жыл бұрын

Scott from Dallas paint correction says its better to use the iron remove before even rinsing/foaming since the water will dilute the product. Any thoughts on that?

@Grk352 4 жыл бұрын

have you ever had issues with your neighbors because of the noise you make ??? especially in a quiet neighborhood ... i have done my car once in my garage with the door open and it took almost 6 loud hours and i think is not the best place to do it as a business. i wouldnt feel confortable doing it on a daily basis. what do you think ??

@Bosshog4541 3 жыл бұрын

How long are you letting the ceramic sit before whipping off

@rebeccabarlow 4 жыл бұрын

Also, with the ceramic coating, does it fill in Clear coat scratches, or would you have to sand it down first??

@fredyman30 4 жыл бұрын

What is your dilution ratio for the brake buster?

@robertm6449 4 жыл бұрын

Is the 272 just as easy as the zr53 for beginners on ceramic. Which would you prefer for mobile detailing using a garage at a customers house or our personal garage

@VinceCannavaII Жыл бұрын

Maybe you're going to say this, but after you're done asking the coating, don't you have to garage this car for a day to properly let it cure?

@anthonyvaldez1448 4 жыл бұрын

A tip for your wash mit put the white part of it put it in the mit.

@wilsonautodetailing 4 жыл бұрын

I don't actually like to wear the mitts, I'd rather just use it as if it doesn't have that in the first place

@Greg_P611 4 жыл бұрын

Luke some detailers say if it doesn't come in a glass bottle it's not a true ceramic. Thoughts?

@johnnyray5515 4 жыл бұрын

Do you use a brand new microfiber wash mit for every client?

@nicholasi8296 3 жыл бұрын

For every one of your maintenance jobs or just regular jobs where you detailing the outside do you also do the inside or is that a separate job you charge extra for?

@yousefalisy8091 4 жыл бұрын

Hey man Does nano ceramic prevent swirl marks Great detailer

@chrisbehm5947 4 жыл бұрын

Thanks for the video. Question: What is a "spider pad", and can you post a link on where to buy them? Also, for that LHR 21 would I need 6" or 7" pads? Thanks!

@Chase.Charli 3 жыл бұрын

What Swirl Finder Light are you using?

@Staypuls 4 жыл бұрын

does the temperature of my garage for ceramic coating matter?

@Oceanhills-Detailing 4 жыл бұрын

You sound like Graham Stephan with those smash requests.

@toxicninjagaming 4 жыл бұрын

Awesome video.

@wilsonautodetailing 4 жыл бұрын

Thanks man!

@zubastik2992 4 жыл бұрын

Not sure what you pay for nasiol zr53 but retail it's 119$. Isn't it more cost effective from cost perspective to use gtechniq crystal serum light at 66$ a pop(super easy to use as well and also durable)?

@Paco7p 3 жыл бұрын

I can’t add ceramic coating for my services, because I have no idea what or how much to charge?

@MiggysAventures 3 жыл бұрын

Hey What’s your opinion on Crystal Syrum light With Exo 4?

@larrya5897 Жыл бұрын

About 16:50… what is that spray

@JNorth87 4 жыл бұрын

Good channel. Subbed

@scotth.1393 4 жыл бұрын

Play this video at 0.75 speed and it is perfect.

@StrideX21 4 жыл бұрын

ive watched dozens of your videos and you've helped me so much! I do want to ask, how would you paint correct a vehicle that has been previously waxed, or had the chemical guys hyper wax applied to it? i tried to remove swirls from my car about a week after applying that product from chemical guys and I couldn't get the swirls out. i know it takes practice but i pressed lightly and softly. is it possible that i sealed the swirls in?

@aidenm2672 3 жыл бұрын

Wash the car with a ; stripping wash or Dawn dish soap works as well. It will remove the old wax so you can buff