1000$ paint job DIY AT HOME

Рет қаралды 11,387

5 ай бұрын

Air compressor 130
Paint gun 189 (mark1 eco my brand)
Paint : speedokote base coat kit 199
Glamour clear speedokote 119
Sander and sand paper 120
Body filler and primer 120
Masking materials 120
BALLPARK NUMBERS DEPENDING ON WHAT BRANDS YOU BUY AND WHERE YOU SHOP
we do work for the public, estimates cost 20$ via cash app, and pictures by email
Cash2kcars@gmail.com

Пікірлер: 183

@Evanbmt 5 ай бұрын

I’m spraying flip cars for some local people in my area. With the old harbor freight 29 gallon air compressor. It keeps up with my LPH400. A year ago I tried the 1150 and that’s all I’ve been spraying since. Glass right off the gun. Keep up the great videos!

@k.lamareyev4418 5 ай бұрын

I'm going to give this a try

@speedokoterefinishnetwork4937 5 ай бұрын

Not wrong. The smr1150 is top dog clear for under 80 bucks a kit.

@2koolforyou88 5 ай бұрын

I use the same compressor 💯

@speedokoterefinishnetwork4937 5 ай бұрын

@@2koolforyou88 it's good for panel work

@webmastersof 5 ай бұрын

Glamour coat clear coat is my favorite clear coat. I always seem to get a good shine out of it and its not expensive compared to other clears on the market

@speedokoterefinishnetwork4937 5 ай бұрын

For 120 bucks and I can spray a whole car 2-3 coats??!! IT'S THE BEST. Most glamor clears out there are way more expensive

@hanknipper3921 5 ай бұрын

You always put the key board commandos to shame! Keep it up my brother.

@speedokoterefinishnetwork4937 5 ай бұрын

I do stuff wrong on purpose just so they cry and scream in mommy's basement

@Gunsgame1966 5 ай бұрын

Great video ! Us backyard guys struggle and get god results with what we have ! This is great for the newbies

@speedokoterefinishnetwork4937 5 ай бұрын

Absolutely!

@joshuawormington2880 5 ай бұрын

I’ve watched a lot of your videos and ironically this is the slickest and cleanest paint jobs I’ve seen on your channel.

@speedokoterefinishnetwork4937 5 ай бұрын

It definitely came out clean for a budget job

@joshuawormington2880 5 ай бұрын

How much would you charge for something like that? I’m an autobody guy and I want to start doing side jobs but I have no idea how to price them.

@speedokoterefinishnetwork4937 5 ай бұрын

@@joshuawormington2880 macco charges 1200 for there cheapest paint job now. So nothing less than that

@lisadan66 5 ай бұрын

Love and appreciate your videos Marco!

@speedokoterefinishnetwork4937 5 ай бұрын

Thanks!

@MarkAnthony-rb7fp 5 ай бұрын

Awesome results! You always throwing out all these wild challenge scenarios and come out great.

@speedokoterefinishnetwork4937 5 ай бұрын

Yes I try man!

@danielmcqueen1024 5 ай бұрын

Marko, that paint came out nice! I was looking to buy a big compressor but found a new 60gal Kobalt in my Cuz' garage... never used or even plugged in :) Now its in my garage and my first paint job will be on my ole 04' Crown Vick! Gotta get it done by the end of March. before the Cottonwood trees let loose!

@speedokoterefinishnetwork4937 5 ай бұрын

Spray that thing NOW lol cold is best

@joshdane5657 5 ай бұрын

@@speedokoterefinishnetwork4937 yea he better spray it. Thanks for mentioning that too. I been thinking wait till warmer but I didn't think about cold allowing the paint to flatten out and flow better. I know it'll flash off too quick in summer than tiger stripe city or look like a pile of sand especially with metallics 😂 my marquis can wait lmao but my 89 civic sedan needs it's nice oem metallic blue back. B37M-3

@joshdane5657 5 ай бұрын

Thats a boat lol. But not a bad ride. I daily a 05 marquis and my roof is getting pretty bad.

@JohnWD40TC02 5 ай бұрын

Thanks for doing this for us Marco I think we all appreciate the time and cost you put into it. I'm really happy that someone has finally done a full respray using a small 6.6 gallon compressor it just goes to show it can be done, the car looks amazing as well mate nothing wrong with that👌🙏👍John UK

@speedokoterefinishnetwork4937 5 ай бұрын

Absolutely!

@V1CSTAA 5 ай бұрын

You inspire us brother thanks for the work👏💪

@speedokoterefinishnetwork4937 5 ай бұрын

Absolutely!!!

@josecruz9897 5 ай бұрын

I'm amazed on how beautiful your paint jobs turn out looking out for our pockets!!! Thanks for sharing the tips and tricks!!! Awesome job Man!!!💪😎🙏🙌

@speedokoterefinishnetwork4937 5 ай бұрын

Much appreciated!

@fredc8618 5 ай бұрын

You're very humble it looks gorgeous!!

@speedokoterefinishnetwork4937 5 ай бұрын

I try man!

@vaylon1701 5 ай бұрын

Great job brother. It looks good. Trying to get my garage cleaned out so I can play with my old pickup.

@speedokoterefinishnetwork4937 5 ай бұрын

That's the hard part lol

@adanhusane8852 3 ай бұрын

The choice of music. Top tier. The one beat where you show the car. That bass is niice.

@speedokoterefinishnetwork4937 3 ай бұрын

Appreciate it !

@skynetwifi9211 5 ай бұрын

See you liked the electric sander. They work well. Air ones use to much air.

@speedokoterefinishnetwork4937 5 ай бұрын

To much wear and tear on equipment using air ones. Electric sander - 40 bucks and cordless Air sander that blows up my compressor as well from to much heat total cost - 1000$+ and not cordless

@richardportelli1983 5 ай бұрын

Great video. Going to do my old corolla soon. Good tip to spray in the colder weather. Thanks. Hopefully my 30 gallon compressor should have no troubles keeping up. 6.5hp petrol with 18cfm of air.

@speedokoterefinishnetwork4937 5 ай бұрын

Oh that's to easy

@mississippiwrenches295 5 ай бұрын

Nice it definitely has finally been done I was wondering about this for sure 👍🏾 🔥

@speedokoterefinishnetwork4937 5 ай бұрын

I commented I was going to do it in pervious videos finally had to step up and do it

@mississippiwrenches295 5 ай бұрын

@@speedokoterefinishnetwork4937 it definitely looks good for sure

@angelmorales220 5 ай бұрын

It came out amazing.

@speedokoterefinishnetwork4937 5 ай бұрын

Thanks!

@debcolbert3543 5 ай бұрын

Spit & wipe 😂😂 love it! Great job as always

@speedokoterefinishnetwork4937 5 ай бұрын

Thanks 🥰

@seanfalter9903 5 ай бұрын

Can’t wait to see a crazy paint job on that rollback! Excellent work as usual, keep it up man!👊

@speedokoterefinishnetwork4937 5 ай бұрын

I'm actually debating on getting a 2019-2022 crew cab 5500 . So this one I might just redo the white to freshen it up and clean it up good

@seanfalter9903 5 ай бұрын

Sweet, I really like my 4500, if I ever get it back 😂

@speedokoterefinishnetwork4937 5 ай бұрын

@@seanfalter9903 any day now lol

@trbstang 5 ай бұрын

Looks like a great job! I guess I can do it with my Home Depot 30 gal compressor. Just need a good water separator for it.

@richardportelli1983 5 ай бұрын

Try a toilet roll filter. Cheap and easy to service and works great.

@speedokoterefinishnetwork4937 5 ай бұрын

Oh yea 30 gallon easily doable

@salimrandall 5 ай бұрын

Came out great.

@speedokoterefinishnetwork4937 5 ай бұрын

Thanks!

@mikeholm7640 4 ай бұрын

Love your content and just subscribed. Looking for a good video on painting a Chevy Express or GMC Savana (you know, crummy GM White peeling paint issues). There's some not so great videos via the youtube search. I'm amazed that there are isn't some franchise specializing in painting contractor vans in every major U.S. City. I'd like to go White to Green before doing vinyl lettering. I have a fully wrapped Savana van and it looks awesome but am thinking (or at least hoping) that I could paint and vinyl and have it look nice for quite a bit less...plus I'd like to learn to paint and own 5 white vans.

@speedokoterefinishnetwork4937 4 ай бұрын

Thanks for tuning in!

@wilfredogonzalez9091 5 ай бұрын

Nice job 10 star ⭐️

@speedokoterefinishnetwork4937 5 ай бұрын

Thanks!!

@jdere31760 5 ай бұрын

your the man!

@speedokoterefinishnetwork4937 5 ай бұрын

I try!

@Clayton_Bigsy 5 ай бұрын

Great video, as always! Much love from Miami! What products would you recommend for a diy guy in this miami heat?

@speedokoterefinishnetwork4937 5 ай бұрын

Smr42 with medium or slow activator X-slow speedokote reducer

@michaelmason5136 5 ай бұрын

Yes he is one of the greatest minds

@speedokoterefinishnetwork4937 5 ай бұрын

Much appreciated!

@bosshogg_210 5 ай бұрын

Nice 💪💪💪💪

@speedokoterefinishnetwork4937 5 ай бұрын

Thanks!

@kenny54231 5 ай бұрын

Since we can only say good things or be deleted great video mate. And very very believable 👍

@speedokoterefinishnetwork4937 5 ай бұрын

Generally speaking..... I have 0 issues with people giving education advice which can help me and my viewers. Derogatory comments, however yes will be deleted and the people who make them will be muted from my page. Meaning they can still view and comment on my page but no one including me will see the comments.

@kenny54231 5 ай бұрын

@@speedokoterefinishnetwork4937 noted, ok so I will not say that I don't believe this was even possible. I will say this was very possible. I think you will be the only one on KZfaq to do this one. Great job 👏👏

@speedokoterefinishnetwork4937 5 ай бұрын

@@kenny54231 I have yet to see another person on KZfaq spray an entire car with the 6.6 gallon vevor. Panel paint absolutely. Not a whole car

@kenny54231 5 ай бұрын

@@speedokoterefinishnetwork4937 my friend you will not see that ever simply because it is not possible. Most other channels are very transparent. Great video buddy 👍

@caffeine_carl 5 ай бұрын

Nice. I've pained a few cars with the craftsman 6 gal

@speedokoterefinishnetwork4937 5 ай бұрын

Should have filmed it!

@thomas-gj7pp 5 ай бұрын

Lmao doubt that. 6 gallons you will be able to spray a door handle and the tank is empty

@speedokoterefinishnetwork4937 5 ай бұрын

@@thomas-gj7pp I actually used a 6.6 gallon for this video. There is a short where you can hear compressor going and see it in come clips. Not a lie. Not fake. Actually happened

@isiahrouse6446 5 ай бұрын

You definitely ain’t the first but I appreciate the enthusiasm 😂

@speedokoterefinishnetwork4937 5 ай бұрын

Post a link of who else has done it on video. I would love to watch

@Danno74Z 5 ай бұрын

Hello, I asked another KZfaq painter about a month ago to do EXACTLY what you just did. I got well over 100 replies to my question/comment. THANK YOU for doing this! I did not ask he use a 6 gallon compressor though :). Amazing. I took an old 21 gallon HF compressor and put a 2 piston 2 HP oil less motor on the tank. I'm going to try and spray a car with it. Is that an HVLP or LVLP spray gun you used with the small compressor? Does Speedokote offer OEM colors? I know you have a business to run but helping us DIY'er out like in this video is really nice. Thanks!

@speedokoterefinishnetwork4937 5 ай бұрын

So to answer your question, hvlp lvlp doesn't matter your going to run out of air and have to wait for it to fill up. And yes speedokote does sell oem colors to match by code. That's what I used in this video

@richcaseaxon 5 ай бұрын

Looks Great Bro. #LGB

@speedokoterefinishnetwork4937 5 ай бұрын

Thanks man!

@thomas-gj7pp 5 ай бұрын

Should've R&I everything to do it right to prevent peeling but it came out good

@speedokoterefinishnetwork4937 5 ай бұрын

Cheap jobs never get r&I Mid grade paint jobs some r&I Oem quality respray full r&I This was just a cheap respray to show my fans / subscribers what you can do at home without much complications or much money. However yes full r&I is the best way

@3Wheels1Block 5 ай бұрын

If you needed to extend your paint would this be a good place for some clear base + premixed color???

@speedokoterefinishnetwork4937 5 ай бұрын

If you need to extend your color, start by covering primer areas with some old "junk paint" That's the best method I have done

@scottiencali 5 ай бұрын

Hey great job!! How much paint should it take to paint an entire car? Would you do 1 or 2 or even 3 coats? Thanks..waiting for calm cool days!

@speedokoterefinishnetwork4937 5 ай бұрын

If I was doing a full color change I would have gotten a gallon. But for a same color oem respray like this with minimal body work , 1 qt kit

@thegeneraljoe67 5 ай бұрын

QUICK QUESTION FOR YOU PLEASE I recently shot my entire vehicle with "speedokote R-Rex bedliner" out of a 2.0 tip HVLP gun. It has dried with very little fine texture just how i wanted it. Since it has dried NOT glossy , I intend to use scotch pad to scuff it 1st than mist the exterior coating with speedokote brand " bite coat adhesion promotor" prior to shooting the clear to assure the clear sticks well. Can u please advise whats the least expensive speedokote gloss clear avialable for me to order that would work over this coating? They have too many types of clear , and i just dont know which one. The vehicle is not kept outside very much at all. THANKS FOR ALL YOU VIDEOS

@speedokoterefinishnetwork4937 5 ай бұрын

Smr 135 is pretty cheap and holds up well

@troylukans2174 5 ай бұрын

I have a question for you. I have two different, KZfaq channels, Troy‘s restoration and Troy‘s restoration 2.0 I do car restoration and Arcade restoration where I paint on both of those channels I have tried the SMR 21 had pretty good results with it. I spray in a heated spray booth, so I bake it at the end, I just picked up some SMR 1150 have not tried it. Is it a good clear what’s the longevity of it? Obviously it Hass to do with how well somebody takes care of it. Just wondering if you ever used it and what were your thoughts on it? Any tricks that I need to know thank you, Troy.

@speedokoterefinishnetwork4937 5 ай бұрын

Super good clear for the money. Only thing I don't like about it is first coat is almost useless with this stuff, but my second coat it glosses up super nice and longevity I would expect it to last at least 4-7 years bakeing out in the sun

@IRESTOREBUILDSTUFF-ne9xv 5 ай бұрын

OK good to know thank you for getting back to me. I watch all your content and I love it. I like the fact that you do shit on the cheap I like to do cheap paint jobs. Unfortunately I have to do a lot of high-end ones.Witch takes along time

@chrisholden2952 5 ай бұрын

I have a 2012 honda civic, where can I get that paint kit from? Seems like a crazy question but I just found this video on KZfaq. Thanks

@speedokoterefinishnetwork4937 5 ай бұрын

Speedokote sells everything you need! Start to finish

@kkp4297 2 ай бұрын

why is that clear coat so yellow in the cup?

@MikeWolf-427 5 ай бұрын

Great video. What can I do about an '01 Ford truck with spider cracked black paint? Do I sand it all down to bare primer and then spray or can I just scuff, skim and paint? I just want a nice 10 footer.

@speedokoterefinishnetwork4937 5 ай бұрын

Pretty much sand down to primer. Not a fun job.

@MikeWolf-427 5 ай бұрын

@@speedokoterefinishnetwork4937 Not great news but thanks for the help. 😃. Keep up the great work.

@speedokoterefinishnetwork4937 5 ай бұрын

@@MikeWolf-427 absolutely

@joshdane5657 5 ай бұрын

Dam i bought the McGraw 20 gal oil lube compressor. I was gonna get this vevor. I still might because its cheap too. But i need some old Honda paint. B37m-3 i think is the code. Florence blue metallic

@speedokoterefinishnetwork4937 5 ай бұрын

20 gallon might do you a little better

@joshdane5657 5 ай бұрын

@@speedokoterefinishnetwork4937 yea I remember you're older videos and where you used it to spray that Lexus. Thanks for mentioning the cold thing too

@joshdane5657 5 ай бұрын

I'm glad i have patience but whoever painted the ef last did horrible. It's straight sand pile and tiger striped lol they tried atleast though!

@itsturbinetime 5 ай бұрын

can you do some experimenting with denim pads for cutting and buffing if you haven't already?

@speedokoterefinishnetwork4937 5 ай бұрын

Absolutely!

@speedokoterefinishnetwork4937 5 ай бұрын

Just to update you, I just bought them right now. I am here to bring you content you guys want to see!

@itsturbinetime 5 ай бұрын

@@speedokoterefinishnetwork4937 Hell yeah bro! That would be sick if the denim can knock out runs and sags after hitting them with the razor blade trick.

@DaSesh 5 ай бұрын

curious how often are you cleaning your gun? lets say on this job how many times did you actually break the gun down and fully clean before spraying any other coats? or did you just let it rock? im having an issue where i can lay down about 2 quarts, however after the 2 cups are finished if i dont break down and clean my gun, it gets clogged and starts sputtering and spitting paint.. smh i have an 80gallon, decent compressor so it isnt a lack of air but im wondering why i gotta clean so often? i watch a local painter and doesnt matter what he sprays whether single stage enamal, waterborne, ppc etc etc he breaks his iwata down once.. if i dont break it down eberytime my paint jobs are shit.

@speedokoterefinishnetwork4937 5 ай бұрын

Speedokote sells a spray can spray gun cleaner that you squirt in the top and run it through the gun. I don't have to break down my gun very often because of that. Mabey once every two weeks. It's nice

@DaSesh 5 ай бұрын

thank you sir, def investing in that product asap.@@speedokoterefinishnetwork4937

@jarrodluetkemeyer1709 5 ай бұрын

When is your new paint guns coming out

@speedokoterefinishnetwork4937 5 ай бұрын

Crazy you asked.... New prototype just came in yesterday! Should be launching come April!!

@HiFiInsider 5 ай бұрын

lol... you made me laugh.

@speedokoterefinishnetwork4937 5 ай бұрын

Spit and wipe do it for ya?

@JasonBackes 5 ай бұрын

❤ Aother best, Hay Marko, I don't know if other subscribers have this, but I have to subscribe, ever video u put out?? I've heard other utubers have this happen too, just letting u know, n yes I hit like 👍 n subscribe ever video 📹, Jason B, KS.

@speedokoterefinishnetwork4937 5 ай бұрын

Weird stuff has been happening with KZfaq lately

@JohnPatrick018 5 ай бұрын

Would this work on a single stage? Single stage is a little thick than basecoat clear coat, I wonder if there’s any difference? Great video all and all!

@speedokoterefinishnetwork4937 5 ай бұрын

With a tad of reducer and x slow activator absolutely

@JohnPatrick018 5 ай бұрын

Thank you sir, for a free and vital info!

@Joeshomegarage 5 ай бұрын

Why you putting down the base model TL man😂 a set of wheels, some tint and gut the cats and you've got a cool car. TL-S in a manual though 🔥 the body style has held up with time. Looks great 🤘

@speedokoterefinishnetwork4937 5 ай бұрын

It's mostly dumb kids and broke wana be bill gates around my area that drive them that's what makes me hate them. Over all not a bad car for a around town f-off car 🤣

@Joeshomegarage 5 ай бұрын

@@speedokoterefinishnetwork4937I bought my 04 in 06 with 30k miles on it so maybe a different feel. The seats were nice and soft and pretty quick for a Honda 😂

@speedokoterefinishnetwork4937 5 ай бұрын

@@Joeshomegarage yea the people that bought these new were a different class.. This was successful middle class / upper middle class Americans who wanted a luxury car. Now it's a screw boy car 🤣

@Fred_Durst1 5 ай бұрын

Marco - internet police here - even I think this one came out good. No buff, no corrections, just send it.

@speedokoterefinishnetwork4937 5 ай бұрын

True🤣

@trentdawg2832 5 ай бұрын

Dawg!!!

@speedokoterefinishnetwork4937 5 ай бұрын

😎😎😎

@codycastro8083 4 ай бұрын

I saw that you changed the knob on the compressor to 90psi. Is there a reason for that an why? Asking respectfully.

@speedokoterefinishnetwork4937 4 ай бұрын

I actually should have set it for less that way I had more consistent pressures

@codycastro8083 4 ай бұрын

@@speedokoterefinishnetwork4937 so what’s that knob for? Is that knob for when to turn on the compressor?

@thatGuyQuincy 5 ай бұрын

Im in baltimore county where is your shop located

@speedokoterefinishnetwork4937 5 ай бұрын

Central Pa not far

@sinformant 5 ай бұрын

So when are yoi going to throw up a poll so us viewers get to vote on what beverage you spit onto a panel next before paint?

@speedokoterefinishnetwork4937 5 ай бұрын

This weekend bro!!!!!

@sinformant 5 ай бұрын

@@speedokoterefinishnetwork4937 😅great!

@speedokoterefinishnetwork4937 5 ай бұрын

@@sinformant dude I had to throw in that short of the old guy.... I was dieing over that I'M NOT THE ONLY ONE 🤣🤣🤣

@jorelsmith1985 5 ай бұрын

Mannnn i know im off subject but what episode of the Simpsons was that in the beginning lol

@speedokoterefinishnetwork4937 5 ай бұрын

No idea 🤣🤣🤣🤣

@jorelsmith1985 5 ай бұрын

@speedokoterefinishnetwork4937 lol thanks.. searching I must lol

@nclildogg2 5 ай бұрын

Hey what psi were you spraying at?

@speedokoterefinishnetwork4937 5 ай бұрын

No idea wasn't keeping track cause can't keep constant pressure with that small of a compressor just to be honest 🤣 Totally winged it

@tonyestvik7969 5 ай бұрын

Good job! So the panel - paint your wheel is the they!? Sorry Marco , have to ask, you did this job with your gun- a ordenary professional gun, IF YOU DONE IT with your TEEMU -gun, what do you think have been the different or similarity to this spray....? And sorry again, if you used a LVHP- gun, whats the similar vs non similar things you have to do.....⁉️ Ok, now maybe a tip for you - I know that you are a clever guy...😜.... But if you could get hold of panels of a car...(thinking maybe cheaper then a hole car, you know I'm swedish so little of the car and parts- prices in US) or GET A CAR (A= for tinkering around car- tryout car)...to do ANYTHING AND EVERYTHING WRONG to do car....Sorry I hope you can understand how I meaned......? Good job!

@speedokoterefinishnetwork4937 5 ай бұрын

Almost all the sub 300$ guns right now are from China.. However difference is some go through through testing and quality control before released.. Others not. This is what makes the price difference.

@speedokoterefinishnetwork4937 5 ай бұрын

And yes I've been thinking of doing that 🤣

@acevedohiram 5 ай бұрын

Round 2!

@speedokoterefinishnetwork4937 5 ай бұрын

😂😂😂my bad man

@acevedohiram 5 ай бұрын

It's all love haha. That glamour clear always comes out nice! @speedokoterefinishnetwork4937

@speedokoterefinishnetwork4937 5 ай бұрын

@@acevedohiram so I find this clear to be best for super cold weather like 25-45 degrees is best. Anything Warmer I grab the smr42 or the smr32

@acevedohiram 5 ай бұрын

@@speedokoterefinishnetwork4937 do you use accelerator for the base in those temps?

@terrellgaines88 5 ай бұрын

What air compressor hose is that

@speedokoterefinishnetwork4937 5 ай бұрын

Just a harbor freight one

@I-Z0 5 ай бұрын

I have that car

@speedokoterefinishnetwork4937 5 ай бұрын

It's a good little beater.

@xavierortiz2690 5 ай бұрын

It would be nice to see a comparable Urechem Speedokote comparison, big Thumbs Up on this vid

@speedokoterefinishnetwork4937 5 ай бұрын

I used urechem back in the day 0 complaints

@waymenlawrence2064 5 ай бұрын

It would have been more believable if you actually showed the air compressor being used in real time in real speed

@speedokoterefinishnetwork4937 5 ай бұрын

It was right behind the car the entire time, you can see it in the video when I spray the rear passenger side quarter panel with the air line going right to it.

@waymenlawrence2064 5 ай бұрын

@speedokoterefinishnetwork4937 yes you can see it but you really can't nor hear it recharge 🤷‍♂️

@speedokoterefinishnetwork4937 5 ай бұрын

@@waymenlawrence2064 I'll post a KZfaq short just to prove im a honest person, does that help?

@waymenlawrence2064 5 ай бұрын

@speedokoterefinishnetwork4937 just make another video actually showing the compressor in use with no overvoice

@waymenlawrence2064 5 ай бұрын

@speedokoterefinishnetwork4937 your trying to say your the first one to do this but your video is too edited and it doesn't show much

@joblo2299 3 ай бұрын

Cost me 3k.but 2500 of it was mistake corrections😂😂

@Juliopaints 5 ай бұрын

You should have thought this one out. This video insults the intelligence of your supporters. Not your "fans" this guy thinks he's a famous actor all of my "fans" 😒

@speedokoterefinishnetwork4937 5 ай бұрын

So people that fallow me every single video, every week, for years, are not fans? Please educate me...

@speedokoterefinishnetwork4937 5 ай бұрын

@@Juliopaints your more than welcome to leave if you want.. I have fans, subscribers, and followers... If you don't like my verbage that's YOUR issue, I'm not here to tippy to around people's feelings and word things carefully. Wrong channel man. And as far as your insult about me being "to cocky" These type of claims usually come from the grown men who haven't made anything of life and are extremely envious and jealous that a 31 year old has made it farther than most 40-50 year olds. But carry on mate 🍻

@Juliopaints 5 ай бұрын

@@speedokoterefinishnetwork4937 cheers mate 🍻 and if by "further in life" you mean material items / business. Then 👏 I'm sure you don't mean internal happiness from family and friends but we all know what you mean 😅 💰💰💰

@speedokoterefinishnetwork4937 5 ай бұрын

🤣🤣🤣🤣