100W Valve amp, silent recording

No video

100W Valve amp, silent recording - Two Notes Captor

Рет қаралды 23,612

Күн бұрын

Today we're looking at how to record an amp like a Marshall 100W TSL monster without making a deafening racket, but whilst keeping that real tube amp feel - presenting the Two Notes Captor!
Details of the Captor:- www.two-notes....
------
What gear to buy? We recommend interfaces, microphones, monitors and more at our Thomas (Europe) and Sweetwater (USA) links below
www.thomann.de...
🍻 BUY US A BEER WITH PATREON!🍻
/ hoppolestudios
Thanks to our Patrons who made this possible - your names are at the end of the video. You make a huge difference!
📱 FOLLOW US HERE 📱
Facebook: / adamsteelproducer
Instagram: / adamsteelproducer
All links are affiliate links
#SilentRecording #MusicProduction #GuitarTone
-

Пікірлер: 75

@NicholasGreenwood 4 жыл бұрын

Thank you for specifically demonstrating the fan noise and 100W attenuation. I think I might just get one of these! (16 ohm version for my Fryette Pittbull 100CL.)

@Dodgyguitarist 11 ай бұрын

Just bought one of these! Mainly using for attenuating into a cab right now but wow it’s immense. Amp and cab sound killer now

@Heikken 6 жыл бұрын

Nice demo and yay for making sure that your guitar is in tune!

@ZaryaMain 3 жыл бұрын

I'm SO glad you covered the amp noise! I didn't know if that was normal or not. I feel a lot better about that happening now.

@elvis_chen 5 жыл бұрын

Thanks for the review, the detailed one I've seen so far, even with the fan noise sample!

@JasonMcFly 5 жыл бұрын

-20 db should cut it WAY down. My THD Hotplate goes down to -16 and that takes a cranked 50w JMP down to conversation level. Cool stuff

@NorthernProductions886 2 жыл бұрын

Great video, I like how he explains things.

@veerchasm1 4 жыл бұрын

5:30 good job pointing this out, the first time I noted this it freaked me out

@TheDistortionPrinciple 3 жыл бұрын

I am quite curious how you set your level on the captor and then set the input and output in wall of sound to get the best tone. I've yet to find a video really taking about the best way to set those three levels

@arissp4950 2 жыл бұрын

same. I have to manage master volume of amp, output of torpedo, input of sound card, and cubase levels. what a mess

@michaelfeliciano5731 3 жыл бұрын

Hey man - Great video. Thank you. I'm just getting into this area - So when you are playing guitar in the video, are you running the sound of the guitar through your DAW, and into the room through your monitors so you can hear what is being recorded? I guess I'm wondering how to achieve my goal of being able to practice and record at low volume in my office studio but have an enjoyable experience (hearing the cab sim imaging ) without headphones. Thanks!

@vlasacs 5 жыл бұрын

Great vid!

@guitarz 6 жыл бұрын

Great video

@kostischaveles 5 жыл бұрын

Thank you so much I really need a box like this for silent recording my Vox amp. I have a question. I always record di tracks and then reamping them back to my Cubase with a radial reamp box. It’s always very hard to make a great sound out of this without disturbing my neighbors. So can I use the torpedo after the reamp box to capture the raw signal of my amp and then use the torpedo’s software to further tune the sound? Thank you 😊

@FullyBakedFINN 8 ай бұрын

Why does it seems like someone is holding this dude at gun point to record this video

@paultsardakis778 6 жыл бұрын

Hey man, cool video! One question, could you use the line out or xlr output from the torpedo direct to a digital recorder, bypassing the need for a DAW?

@adamsteelproducer 6 жыл бұрын

Absolutely, if that’s your thing! It’s got the switch for cab simulation so you can record to whatever medium you want, if a DAW isn’t your thing

@tomix1970pl1 4 жыл бұрын

@@adamsteelproducer Could you show how to connect it for silent recording?People speak about it bit no one showes how?

@adamsteelproducer 4 жыл бұрын

It’s literally as simple as a cable, and since every system is different no-one would be happy and I’d get a thousand “what about my system?” Questions. Also it’s not a full enough topic to make a whole video on

@paulbeharrell 6 жыл бұрын

Great demo as always Adam!

@mialarssen2627 Жыл бұрын

can we use it as DI box ( Clean + amp signal) in a DAW ?

@DelReiRock 6 жыл бұрын

Hey man! Nice video! Using the IR sounds much better than GTR outuput. So, you can use it with or without a real cab, in a silent recording without damage the amp, right? This Wal of Sound can be loaded in Reaper as a plug-in?

@adamsteelproducer 6 жыл бұрын

Hey, yes all exactly right! I also prefer using an IR or Wall of Sound, but in a situation where all you have is the Captor, it still works! And wall of sound is a reaper compatible VST, yes- in fact that’s how I use it all the time :)

@DelReiRock 6 жыл бұрын

Hop Pole Studios Good to know man. Thanks for helping! Does the loadbox section of this unit have the SAME (sound) quality of Live and Studio versions!?

@nedim_guitar 2 жыл бұрын

I know this video is four years old, but I'm just now looking for a setup for silent recording of amps. I just want to make it clear: Does the Torpedo make your speaker completely silent, allowing you to run the line output into an IR loader or DAW, where you have IR?

@StratsRUs Жыл бұрын

Yes

@vlat74 3 жыл бұрын

great video

@HBNF721 6 жыл бұрын

Good explanation, much appreciated - Let me ask, is there a loss in "feel" of the amp when playing through the Two Note - As someone who has experimented with many amp sims and IR's, "loss of feel" and "bounce off the fretboard" is something that ultra important from a writing standpoint - Thanks

@AlextheBant 5 жыл бұрын

Yes. As most of that feel purely comes down to volume. You'll always losr that feel through pc etc. I have the captor. Its great. But an amp is an amp. A cab is a cab

@davidwolfe9391 3 жыл бұрын

I just bought one of these and after having owned an Isolation cabinet, OX, WAZA TAE, and a Palmer PDI-03 I can say the Captor X came out on top. I can finally lay down cranked marshall tracks quietly without much loss. The WAZA TAE was ok, but it had loads of un-needed features and was a heavy thing. The OX was ok also. I simply prefer the captor, it sounds as good (or better) as the other more expensive ones and is easier to tote around...

@orcunozcan 2 жыл бұрын

Thanks flr the great video man!! may i ask , what is the quality of DI sound? should we use some kind of an other hardware for it such as radial j48? thanks

@adamsteelproducer 2 жыл бұрын

The captor isn’t a DI, I’m not sure what you’re asking in this case

@orcunozcan 2 жыл бұрын

@@adamsteelproducer İts says on the box DI, can we use it as DI box if so what is the best equipment when you compare radial j48 and captor

@adamsteelproducer 2 жыл бұрын

It’s a load box, not a DI. It cannot be used to plug a guitar straight in, it’s for speaker level only

@orcunozcan 2 жыл бұрын

@@adamsteelproducer Thank you so much for your support and info!!

@felipehoferdenecken9332 3 жыл бұрын

Great Video! i have a marshall jcm2000... so i need to connect the Captor imput to the loudspeaker out of 16 ohm?? sorry for the ignorance.. i just don´t know which one output is in my marshall.. Thanks in advice! :D

@adamsteelproducer 3 жыл бұрын

Your Marshall should have several impedance options, you would connect the one that matches the number on whichever Captor you have (8 to 8, 16 to 16 etc)

@DelReiRock 6 жыл бұрын

Hey man. To connect the captor into the sound interface do you use a normal instrument cable or a "cabinet" cable?

@jonassturm2787 6 жыл бұрын

Use a shielded "normal" stereo (trs) instrument cable. Don't cheap out on cables ;)

@adamsteelproducer 6 жыл бұрын

No, to connect the Captor to an interface you should be using an XLR, as the circuitry requires 48V phantom power. I agree you should use good cables though

@tcerecords5253 4 жыл бұрын

You connect the amp to the captor using a 1/4” SPEAKER CABLE (not an instrument cable). You connect from the captor to your interface using an XLR

@guitardreamgirl9312 2 жыл бұрын

Is it important to connect your physical cab to the speaker out even if you just want silent recording? Or is it safe for you to just connect your amp to the torpedo then into your interface, no physical cab?

@adamsteelproducer 2 жыл бұрын

It’s important NOT to connect your physical cab if you want it silent! Otherwise the sound comes out of the speaker. It’s designed specifically to replace the speaker load

@guitardreamgirl9312 2 жыл бұрын

@@adamsteelproducer ok thank you, also, while I’m here, maybe you know. If my amp is 4 ohm but my captor is 8, will I break my amp? Or can it be safely done?

@adamsteelproducer 2 жыл бұрын

What amp would be 4 ohm only? That sounds rare

@robbievalentine8239 4 жыл бұрын

Is the "noise" from the transformer in the Amp and fan in the captor noticeable in are recorsing/tracking or just in the room

@tcerecords5253 4 жыл бұрын

The noise generated inside the Captor is a small whiny fan sound and a super quiet guitar sound. These are only noticeable if you are sitting right next to it. It doesn’t effect the sound leaving the unit.

@metalliholic 5 жыл бұрын

So if I plan on getting the captor purely for in home recording. Do I not need the Cab pedal since I’m using the software? Also do you know if the wall of sound software that comes with the captor get the update for 2 mics simulation?

@adamsteelproducer 5 жыл бұрын

Hi Edgar- yes you don’t need the cab pedal if you’re only recording into software. And Wall of Sound could always do 2 mics, or even more- the limit was always in the Cab hardware (but even that is all 2 mics now)

@metalliholic 5 жыл бұрын

Hop Pole Studios hi, Thanks for the reply. Everything makes a lot more sense once you mentioned the Cab M is a hardware version of the software.

@GabiLotcu Жыл бұрын

The license on this unit can be used one time only?

@adamsteelproducer Жыл бұрын

License? It’s an analog unit. If you mean wall of sound, you register it to your account, and can de-register later if you need to

@joshjustice3598 4 жыл бұрын

Probably a stupid question but will this work with a combo tube amp (peavey delta blues 210)for recording and all around apartment playing???

@bilnabiln 3 жыл бұрын

Did you end up getting this and finding out? I’m in the same situation but with a Fender Princeton

@simonvanderheijden432 2 жыл бұрын

@@bilnabiln Yes to both the amps. It wil work with ANY tube amp up to a 100w. Just get the one with the right Ω (ohm) for your amp.

@BillHesse 6 жыл бұрын

Yeeeeeaaaaaaaaassssss!

@kingpriapatius5832 3 жыл бұрын

Does the amp need to be connected with a speaker?

@adamsteelproducer 3 жыл бұрын

No, that’s the main selling point of this, it replaces the speaker

@kingpriapatius5832 3 жыл бұрын

@@adamsteelproducer That's fantastic definitely gonna buy this for my 6505.

@himynameis77 3 жыл бұрын

What model of Les Paul is that? Beautiful guitar!

@adamsteelproducer 3 жыл бұрын

2013 Traditional in Inverness Green (with bare knuckle Juggernauts)

@MarkBlumenthal1 3 жыл бұрын

Why do you skip the setup

@adamsteelproducer 3 жыл бұрын

That’s something covered in the manual and a lot of other videos, and it’s 2 cables

@MarkBlumenthal1 3 жыл бұрын

@@adamsteelproducer ok, thanks! I'll download the manual, thanks for the review

@RichRobinson 5 жыл бұрын

great video.

@adamsteelproducer 5 жыл бұрын

Thanks Rich :)

@BillHesse 6 жыл бұрын

I paid 200-225 US

@OveRanheim 6 жыл бұрын

Why not use an Axe FX, which sounds amazing!

@adamsteelproducer 6 жыл бұрын

Why not indeed. I personally am very comfortable with an Axe, but a great many guitarists are more comfortable with using a single amp, with tactile control and a very immediate feedback from the controls- this is a great way to harness the tone of a favourite amp without having to substitute the whole thing

@WickedJester77 6 жыл бұрын

Well for one, I already have 5 tube amps. So a 200 dollar load box makes way more sense than an axefx

@AlextheBant 5 жыл бұрын

Modelers are good. But have 2 problems: - choice paralysis. Too much tweakery. A tube amp is set and sounds good. Done. All your time goes to playing. - 2 they still don't react the same. Live i could live with my modeler as you can't tell live anyway. But in the studio, or for personal pleasure i prefer a real amp Source: guy who played modelers all his life, and still does.

@tcerecords5253 4 жыл бұрын

Asymmetry Studios couldn’t have said it better