(1558) Review: Lishi SC1, SC4 and KW5 Picks
Рет қаралды 156,541
4 жыл бұрынIn video 1558 I review the new Lishi SC1, SC4 and KW5 lock picks, show how incredibly simple they are to use, and demonstrate how to decode any lock you pick.
I bought all three of these from: www.lockpicks.com/catalogsear...
Like this video? Subscribe here: kzfaq.info...
👇🏻Links👇🏻
⭐ Support LockLab on Patreon: www.patreon.com/bePatron?u=29...
⭐ Support LockLab through Paypal: www.paypal.me/LockTube
Visit the Tribe’s website at: www.LockLab.com
LockLab’s Modular Lock picking courses: www.lockpickshop.com/Bosnian-...
Looking for tools?
🔹 MultiPick Services - shop.multipick.com/
🔹 Sparrows Lock Picks - www.sparrowslockpicks.com
🔹 Lock Pick Shop - www.LockPickShop.com
🔹 UKBumpkeys - www.ukbumpkeys.com
🔹 LockPickWorld - www.lockpickworld.com
🔹 Brockhage - www.lockpicks.com/
🔹 SouthOrd - www.southord.com/?...
🔹 My vise is the Panavise model 350. - www.panavise.com
🎵 Music from Jukedeck - create your own tunes at jukedeck.com
Hashtags
#Bosnianbill #LockLab #LockPicking
@matt6thompson9 4 жыл бұрын
I love these, makes life a lot easier! Great point regarding the purchase of the 6 pin set vice 5.
@bradw0535 4 жыл бұрын
Nice thorough review Bill, great tool for the locksmith! Thank you sir!
@engineer9975 Жыл бұрын
Thank you for the clear answer on if these work this way!
@roysammons2445 4 жыл бұрын
Great concept for a picking tool. Nicely reviewed Bill.
@El_K_Bron_Del_Moycas 4 жыл бұрын
This is quite practical for residential locks
@MoreMushroomThanMan 4 жыл бұрын
Absolutely brilliant design! 😍
@daviddurham2270 2 жыл бұрын
Thank you for going that extra little bit of detail. I have been wondering which one was for what kind of lock and was wondering what the difference between them were. You've been the only one I've found that answered that for me. Thanks again!!!
@marianofuntime8366 9 ай бұрын
plz help, how come my sc1 2 in1 doesn't fit in any of my doors. i life in the USA in California. Are the doors different here?
@johncage3025 4 жыл бұрын
These are absolutely amazing
@kiltedthistle 4 жыл бұрын
Great review Bill. Cheers 🍻
@RogueAssassin00 4 жыл бұрын
I’ve learned a ton from Bosnian Bill, so much so that I’ve started up my own local locksmith service - these Lishi tools would make my job 9000x easier. Good stuff sir, keep it up!
@joshy7759 4 жыл бұрын
Oh God, the rogue assassin started a locksmith company. No one is safe now.
@inspectorbaldbeard1211 4 жыл бұрын
THANKS!! You answered the questions I’ve been asking regarding the 6 pin tools in 5 pin locks.
@mrgadget5023 4 жыл бұрын
If the tailpiece was on the back the sc4 pick wouldn't be able to slide all the way into key way the tip would bottom out at the tailpiece just an fyi. This wouldn't work on a b60n or a f series knob or lever if it was still on a door
@advantagephc 4 жыл бұрын
You can use the SC4 tool in the 5 pin F series locks. The tool will not insert all the way which presents two problems. One - the spacing will be a little wonky - you have to feel around and adjust. Two - if the tool is not fully inserted, all of the tensioning pressure is place on the thinnest portion of the tool which makes it much more susceptible to bending or breaking. On a lock with no spool pins, your pressure will be much lower. Stress on the tool is higher when you are trying to overcome a difficult spool pin. So, while it is possible, I have purchased both lengths for both myself and my technician.
@peteo4454 Жыл бұрын
@@advantagephc thanks! that answer is the best i've seen.
@steveslocksmith211steveslo8 4 жыл бұрын
Great video the only thing is a lot of Schlage locks are 5 Pin with a 6-pin core a true five pin lock that's won't work in it Bottoms Up prematurely so I would recommend buying the SC1 and the sc4
@matthewellisor5835 4 жыл бұрын
That extra stack gives me trap ideas.
@nrowlett 4 жыл бұрын
Huzzah I'll have to add these to the go-bag one of these days!
@RealJonDoe 4 жыл бұрын
Some generic 5 pins will not allow the sc4 going all the way in. This may not allow a good tension or lineup, hence wanting both.
@baileybahr533 Жыл бұрын
Thank you so much, I was wondering about that!
@trailman20 10 ай бұрын
It didn't go all the way in for him and it still seemed to work just fine ( he even said it didn't go in all the way ) ..idk I don't know much about them ..have your used them and experienced issues?
@RealJonDoe 10 ай бұрын
@@trailman20 yes, it greatly depends on where in the lock it binds. Some locks have a stop at the expected end, others end somewhat haphazardly, meaning the lines will not match.
@Jake1973_ 4 жыл бұрын
These things take all the skill out of picking. How am I suppose to feel special now?! 😂 That said, I want!
@CheZfrmdaWestWisc 2 жыл бұрын
By being rich enough to have a full set
@evensonelectronics9577 Ай бұрын
Takes a pile of guessing out of lock opening.. Love these tools.
@richardedwards3098 2 ай бұрын
Hey Bill! I’ve missed your videos! This one happened to come up in my feed…. I fully understand why you don’t do videos anymore. You have my respect Sir. I am the proud owner of 2 lishi tools. I love them! Peace Bill. I hope you and the local (family tribe) are doing well!
@pyratemage 4 жыл бұрын
Great review and tips and Awesome giveaway!
@3927ASG 4 жыл бұрын
Great review and good point about the 5 vs 6 pins. Why get the former when the latter covers both?
@frankbiz 4 жыл бұрын
Great tools. Great video. 👍🏻
@jamesthe-doctor8981 4 жыл бұрын
I saw your first review of the Lishi the other day. It looks like they'll open Kwikset and Schlage locks even for a noob like me without even having to learn how pin and tumbler locks even work. Fortunately, I do, so I'm still entering the giveaway. 😂
@jackjones7615 2 жыл бұрын
Bill took your advice and got myself sc4 plus kw5 all's I need now is the locks to go with them I've heard there are some UK & European that might suit, many thanks Robbie from Huyton Liverpool UK
@AThreeDogNight 4 жыл бұрын
Some very nice tips Bill. Really nice giveaway also.
@smeado3533 4 жыл бұрын
Very helpful. Thank you.
@40motomike 4 жыл бұрын
I've used one of the SC1 Lishi a buddy had. Really nice decoder/pick setup.
@htttp 3 жыл бұрын
I want to buy SC1, SC4, KW1,KW5... Did You know where?
@juancasanova2449 2 жыл бұрын
Great explanation 👌 👍
@chrisdwalter 4 жыл бұрын
I have been replacing old locksets at my office building with schlage deadbolts from homedepot. these are all coming standard with spool pins
@bearsback5099 4 жыл бұрын
Great info my friend.
@jerryy7650 2 жыл бұрын
Very helpful review! Which type of lock pick works for Best lock?
@jimk6208 3 жыл бұрын
I just noticed that Lishi makes a 2 in 1 for the Master m1 keyway, 4pin. (as if master wasn't already compromised.) Opening has never been a problem, but internally decoding to cut code keys for riveted, laminated padlocks might be worthwhile.
@lostforevermore7150 4 жыл бұрын
Love the new intro
@nosleep6829 4 жыл бұрын
wow these are awesome... great video
@Gregoose33 4 жыл бұрын
Great video! Thanks!
@ImGumbyDangit 4 жыл бұрын
Thx for the Video.
@safeshowroom 4 жыл бұрын
The tension arm is supposed to sit right in front of the plug. Not only do you gain more control but you can see Mr Li's face.
@Lonewolve1988 11 ай бұрын
Love this channel
@marianofuntime8366 9 ай бұрын
plz help, how come my sc1 2 in1 doesn't fit in any of my doors. i life in the USA in California. Are the doors different here?
@davesheehan4565 4 жыл бұрын
Great info. And Great give away.
@David_11111 4 жыл бұрын
supper simple... Nice
@RepunzelDamnation 8 ай бұрын
Would this also work on a garage door
@TheLockLizard 4 жыл бұрын
I'm thinking about getting these, however my only concern is that if I only buy the 6 pin version, will a tailpiece or cap on a 5 pin cylinder prevent it from working properly?
@etozhiznj 9 ай бұрын
Which off them are most common to work on different locks?
@ryanclay959 4 жыл бұрын
I am praying that I actually win this giveawy. I have been subscribed to this channel for a while and I have learned a lot about lock picking from this channel. From what I have learned from Bill by watching his lock picking video's I did make my first lock pic and tension wrench out of windshield wiper metal inserts and I got a master lock No.3 and No.1 and I began to use the skills of lock picking I learned from watching Bills channel and I was able to pick open the master lock for the first time 2 nights ago and I posted my very first KZfaq video that night and I gave a shout out to Bill on that video it is under my name Ryan Clay here on KZfaq and it is the first and only video I have ever posted. I thank you Bill for teaching lock picking sport and your channel for lock picking is my favorite to watch regarding lock picking.
@jackjones7615 2 жыл бұрын
Hey Bill will kw5-sc4 fit s keyways? Which we have in the UK. Many thanks Robbie from Huyton Liverpool UK
@Westhelockpicker 4 жыл бұрын
I was gonna ask you about that bill. I just bought the 6 pin versions and could open the 5 or 6 pin with them
@KeylessEntry 4 жыл бұрын
Does the 5 and 6 key variants decode the bitting the same way, I'm having trouble figuring out the geometry and angles required for that?
@carllewis2207 4 жыл бұрын
Just ordered my KW5 and SC4, Bill has never steered us wrong yet. Thanks!
@noahway13 3 жыл бұрын
Well, what do you think? Worth it ?
@carllewis2207 3 жыл бұрын
@@noahway13 absolutely worth it, I use it for decoding more than picking, I can pick faster with something else and decode with these.
@jordangreenwood8124 2 жыл бұрын
Hi will these lishi decoders work on uk? And if so what one would you get besides the master lock one
@gsxrfire8310 4 жыл бұрын
Expensive but a nice tool to have 😎👍
@dtc4201 4 жыл бұрын
Great video
@virginia7125 3 жыл бұрын
My front door is master key capable when the houses in my neighborhood were built. Every 3rd house was master keyed alike. A lot of my neighbors didn't trust this and changed the locks out. I was wondering if all locks, say sargent or yale, use an exact number for the cut depth? My key is old and may can be recut by the depth measurements of each layer. Sargent is 5. Best is 6 on my house. I had a binding car key that worked great on one side. I was able to take the good side and cut a new key that doesn't bind.
@ramonhernandez5218 3 жыл бұрын
Amigo en donde compraste la ganzua lishi .donde me recomiendas comprarla gracias por tu atención
@marionbradshaw6570 4 жыл бұрын
Love you videos
@C_S_funhouse 4 жыл бұрын
#Bosnianbill what do you use to hold your camera or phone in front of you like that?
@billhenderson731 4 жыл бұрын
I really like these, not just for the ease of use for a locksmith, but you could use these to ‘learn’ the pin binding; and practice SPP later?
@agentvx8320 4 жыл бұрын
It's not hard to identify binding order in a lock with ordinary picks. This just makes it more obvious to viewers on camera because of the decoder function.
@themisterbeanie 4 жыл бұрын
Damn wish i could win these.. but yeah maybe the will go on sale soon cause the price is a bit high for my taste but will definitely keep an eye out for this. Any Canadian sites you recommend to get some locksmith supplies or even those picks? Thanks :)
@richardhaen 2 жыл бұрын
Hi Bill u have been off for a while good to have it back on, I watch locksmith lawyer. This is Richard
@agentvx8320 4 жыл бұрын
Bill, if you have a six pin cylinder with only five chambers populated, there's obviously no problem using the SC4 pick/decoder. However, there are Schlage residential grade locks with shorter five pin cylinders (generally knob/levers but the BE365 electronic pushbutton deadbolt also). These will not accept the full length of a six pin SC4 key. In that case you could probably still use the SC4 version of this pick/decoder, but the pin position indicators won't be in the right place when the pick is inserted as far as it will go. (Similarly using an SC4 key with the correct bitting in the last five positions will work, but you have to pull the key out slightly from bottomed out so the pins and cuts line up properly.)
@mikestrohbusch5434 4 жыл бұрын
apparently, you did not understand how to use the 6 pin version in a 5 pin lock
@77nizzova53 4 жыл бұрын
@@mikestrohbusch5434 He was absolutely right!!!! The lock in this video accepted the while tool in, but most residential locks the sc4 wouldn't have gone in all the way!!!!
@oD4rkxW0lfo 3 жыл бұрын
Correct, you just put it in as far as it will go, then work with positions 2-6, treat them as 1-5.
@miamagana7835 Жыл бұрын
Oh now I understand how he did it. I was confused how the hell my lishi wouldn't go all in like his
@miamagana7835 Жыл бұрын
I was wondering if I could make some sort of spacer that would help lining up the pins so that I don't have to pull it out slightly everytime. It would work right guys?
@paulskeie1469 4 жыл бұрын
They look like a good set. The only statement in the video I have a issue with is that you would only carry the 6 pin versions is I have worked with locks that will accept the SC1 but the SC4 dose not go all the way in.
@blakkat531 8 ай бұрын
its the same as using an sc4 blank to make a new sc1 key, the excess is just surplus material the space and depth has not changed.
@Shadownter 4 жыл бұрын
How do these function when used on the quickset smartkey system?
@Acknaar 4 жыл бұрын
So after I built my first lock picking set I poped my master 140 about 20 times . Then I picked the quickset locks on my doors and found an issue with standard presentation of picking . After I picked it I could turn the core freely but the door would not unlock . So after further testing I had to make a knife to turn something deep in the core to release it so . IMHO I would ask you pick an active lock to test these issues in real life situation I think its much harder than presented .
@KirkAtamian Жыл бұрын
What do you recommend for commercial locks just those two or any more. I am a commercial real estate agent and this save lot of times on missing keys
@ricaflorin2 4 жыл бұрын
I got on the website to order a tool but I cannot find nothing for European locks. Any advice? I will use it for hobby, but witch one to buy it??
@matth408 4 жыл бұрын
Do any of these work on Euro cylinders?
@bobfoster5917 2 жыл бұрын
Hi I have the sc1 and not come across any British locks it fits I mostly work on British euro locks do you know what lishi I need to fit them some 6pin and some are 5 pin thanks bob
@iggymac3473 4 жыл бұрын
Now this is the one I'd really like to win great stuff bill great giveaway thanks
@miamagana7835 Жыл бұрын
I was wondering if I could make some sort of spacer that would help lining up the pins so that I don't have to pull it out slightly everytime. It would work right guys?
@joetherev9257 4 жыл бұрын
Great tool
@JS-fb6ww Жыл бұрын
Which one of these do I need to buy in order to pick a falcon lock core?
@rodmaclennan3437 Жыл бұрын
Which lithium would be the best one to open euro cylinder.. thnx
@Fredengle Жыл бұрын
so are you telling me if I need a lockpicking keys you would go with sc4 kw5 only as probably the ones that will most likely cover most applications? thank you
@hobonate2196 4 жыл бұрын
Thanks!
@oklamusiq9743 Жыл бұрын
Can the Sc1 lishi be used to pick Yale 110 /30 padlock
@carlo1132 Жыл бұрын
I wish I bought the Sc1, having trouble with a closet door lock, the reason I bought the SC4 is the seller said it replaces the SC1 and no longer stocking SC1. I am new to this tool and was afraid I was going to damage it, the tool goes all the way in to me and seems to be dead on pin 1, so I was picking 2-6 with the SC4 on the 5 pin door knob lock??
@samxu1467 4 жыл бұрын
Hi Bosnianbill, Can you try out your KW1 or KW5 with Weiser lock (WR5) . I am in canada and lots of Weiser here
@redouan2694 Жыл бұрын
i have a question which one can i use for european locks to be more specific dutch
@NEBoddy 3 жыл бұрын
Except the 6 pin key doesn't fit completely in all 5 pin locks. Does the pick also work in those?
@danielkent6895 Жыл бұрын
Will these work in other locks that aren’t shlage? Like Abus or Lockwood?
@oneundecided Ай бұрын
Thank you for this video. My SC1 key has a pin spacing of 0.156" and the number 73272 printed on it. I measured the distance from the bottom of the key and on the key starting from the front of the key - first - 0.306", second - 0.23", third - 0.305", fourth - 0.288", fifth - 0.228, first, sixth - 0.328". Looks like I need six (or maybe five ) bottom pins and a few top pins. Can you determine the exact pin sizes from this data? I bought a door with a lock for my new porch and want to redo the lock so that it can be opened with my front door key. I hypothesize that my key has only 5 pins and these pins are 73272. What would be the pin's sizing and diameter corresponding to these numbers 2, 3 & 7? Also, how can I find out if the top pins are the same?
@MerkDolf 4 жыл бұрын
Looks like a really simple tool to use, may have to get those and not even try to learn SPP the old way.
@miamagana7835 Жыл бұрын
Mine doesn't go all in but I can set pin 5 with the location 6 on the lishi. So it's just the opposite from u ignoring the 6th pin and I for some reason ignore pin 1. Why Is it the 1st pin location for me and it's the 6th pin location for you if its the same tool?
@BasaysayTv Жыл бұрын
Which 1 can be used for padlocks and doorknob?
@allenang9541 2 жыл бұрын
I been clicking on the registration... I never got picked for free items. I really would love these lishi tools.
@8867348 4 жыл бұрын
So cool.
@nurkurzda2334 4 жыл бұрын
does it also work with European locks?
@jeffjefferson2676 3 жыл бұрын
So these Lishi tools are the final solution to locks? Greetings, Jeff
@GAMESTERVISION Жыл бұрын
Just ordered a sc3 and kw5. Will I need a sc1 or kw1?
@anonimuspr23revolution9 2 жыл бұрын
This tool work on masterlock no 15 5 pins?
@RickOsheaYYJ Жыл бұрын
Thanks so much, I was just about to order the SC1 and KW4 and your insight helped me make a better choice.
@docfate 4 жыл бұрын
Nice!
@robertwright3373 4 жыл бұрын
These look like they would be really nice. They are expensive though.
@GAFO777 2 жыл бұрын
So are there Lishis for European Locks like BKS ?
@ahmedabdallamohmed3474 3 жыл бұрын
Please, I want you to tell me about the most important tools, Mr lishi, suitable for locks and qualin in Egypt, and I also want you to tell me about its model numbers
@marianagastelum6051 4 жыл бұрын
What if there are high security pins? Will it open it?
@macnutz4206 4 жыл бұрын
Yowsa, that is fast and simple.
@victorsouza8443 2 жыл бұрын
Funciona em fechaduras brasileiras ?
@clubsnapperuk Жыл бұрын
lol, i loved this video so much i purchased the lishi sc4 to play with and learn this craft, Big mistake, I'm in the uk and we don't have the Schlag keyway , ive not found a lock yet that this sc4 will fit , hmm,
@vincentr3339 Жыл бұрын
Good to know. Let me know if you find out please as I am also interested 😜
@oklamusiq9743 Жыл бұрын
There should be a giveaway chance here too for some of us using phones to follow you here
@sarinhighwind 4 жыл бұрын
the prices on these are fair!
@Alx-SG 3 жыл бұрын
greetings sir. would you happen to know if Lishi does a tool for Yale keyway or any other european lock? i was trying to look for one but there is so many and almost all of them is for car locks. many thanks.
@virginia7125 3 жыл бұрын
Speaking of car locks, I haven't had much luck. I've used slim jims in the past. Welding wire will work if there's a small window crack. A lot of times, I have to use the air bladder. That's what I was trained on.
@mikrobspen 4 жыл бұрын
Definitely going to buy the Schlage version for my locksmith business. The "SC4" longer version would work for a six pin cylinder that is coded for either 5 or 6 pins. But I don't see how it would work in residential Schlage five cylinder that do not allow for 6 pins, unless it is shimmed so that the tool is held back .156 of an inch (the spacing between Schlage pin chambers). Should be easy enough to make a DIY shim.
@agentvx8320 4 жыл бұрын
I doubt it's really that big of a deal if the pin position indicators are off a little because the SC4 pick is inserted all the way to the back of a 5 pin cylinder.
@mikrobspen 4 жыл бұрын
@@agentvx8320 The tool is in the right position when the shoulder makes contact with the lock. If the longer blade hits the back of the shorter cylinder, then the shoulder can't make contact & the spacing is wrong (same as a trying to use a six pin key in a 5 pin cylinder).
@marianofuntime8366 9 ай бұрын
plz help, how come my sc1 2 in1 doesn't fit in any of my doors. i life in the USA in California. Are the doors different here?
Andrés Rivas Sánchez
Рет қаралды 61 М.
HelpfulLockPicker
Рет қаралды 76 М.
DeviantOllam
Рет қаралды 98 М.