#180
Рет қаралды 1,257
9 ай бұрынVery badly treated - is it worth to restore it?
Part 1: • #180 Simpson260-Series...
Part 2: • #181 Simpson260-Series...
Part 3: • #182 Simpson260-Serie...
My other (1st) Simpson260
Part 1: • #62 Simpson260-Series7...
Part 2: • #63 Simpson260-Series7...
Part 3: • #64 Simpson260-Series7...
More infos: www.simpson260.com
@Destroy_Communism 9 ай бұрын
My first 260 has been with me since 1971. Most work doesnt need DVM accuracy. Most 260’s I have found on Ebay are beyond saving from battery leakage, so I stopped buying them. 5 is enough.
@dl7majstefan753 9 ай бұрын
So i´m a poor guy - i have only 2 of them....hi.
@WECB640 9 ай бұрын
I suspect a cold beer is needed at the end of part 2. Stefan, I enjoy your humor and wit. "There is a bunch of idiots outside." Who puts diodes in backwards with jumpers and mistakes a 22 ohm with a 22K resistor? LOL Oh, if only this meter could talk! It would make a great story and perhaps a movie. 73 OM
@dl7majstefan753 9 ай бұрын
Yes, right!! It´s cruel sometimes but it creates the possibility to acquire a good meter at low price...hi. But maybe the resistors where burnt and the printing was unreadable - but a schematic is available in the net.
@electronicsoldandnew 9 ай бұрын
That’s a great meter, but you’re right: there are a lot of idiots out there messing with stuff they should leave alone. Good job, and thanks for the video.
@dl7majstefan753 9 ай бұрын
Thanks dr Manuel
@davidv1289 9 ай бұрын
Well done, Stefan. Another instrument on its way to a second life. Yes, it has to be said, there are some idiots out there. Hopefully this idiot has learned a lesson - look but don't touch! I look forward to the alignment and upgrades. Regards, David
@dl7majstefan753 9 ай бұрын
Yes and the mount trash grows a little bit slower. But i don´t think that the guys who should watch this video are watching it. Only the guys who knows what to do are watching this.
@montygore1200 9 ай бұрын
I have repaired many of the Simpson meters for a company I worked for. I loved these meters. They were the best before the dvm. I still use one when I need to check a circuit with possible oscillation when my scope is not handy. Thank you for another excellent video. Your video recording is superb.
@dl7majstefan753 9 ай бұрын
Fully agree with your comments regarding use of analog meters
@oe6kyg 9 ай бұрын
immer wieder ein Genuss 73 klaus
@dl7majstefan753 9 ай бұрын
Danke!
@montygore1200 9 ай бұрын
I agree, too many idiots. I was an rf tech and I have ran into a lot of the idiots repair attempts.
@dl7majstefan753 9 ай бұрын
But without those idiots we would have less interesting projects.....hi.
@cbiz8 9 ай бұрын
Stefan, the last adjustment have been done with the instrument in horizontal position, right? Mein Englisch ist nicht sehr gut :).
@dl7majstefan753 9 ай бұрын
All alignments have been done in vertical position. But i only said they should have been done in horizontal position
@anandarochisha 6 ай бұрын
Surplus from Mar-a-Lago ?
@dl7majstefan753 6 ай бұрын
No, internet platform
Immersed
Рет қаралды 96 МЛН
超人夫妇
Рет қаралды 41 МЛН
FredBRadio
Рет қаралды 510
Learn Electronics Repair
Рет қаралды 218 М.
flaco
Рет қаралды 817 М.
LED Screen Factory-EagerLED
Рет қаралды 29 МЛН