‘19-‘21 Tundra Transmission Cooler deep dive plus how to add one!

No video

‘19-‘21 Tundra Transmission Cooler deep dive plus how to add one!

Рет қаралды 14,334

Күн бұрын

A deeper dive on all the details of what hardware is missing from the ‘19-‘21 Tundra now that they’ve deleted the transmission coolers in all their penny pinching wisdom and what is needed to add one from a hardware and installation standpoint.

Пікірлер: 61

@joerivas9847 4 ай бұрын

A vehicle is NOT an investment, its a depreciating asset. BUT still do what you can to make it last. Just bought a 2017 Tundra, hopefully the LAST truck I buy, am 62 years old now.

@montanamike3688 3 жыл бұрын

Thank you for making and sharing this video.

@DirtE30 3 жыл бұрын

Very welcome

@EverydayJ1786 3 жыл бұрын

Good video . Coming up on 1 year for me running a cooler on my 2019 . Imo if anyone tows with their Tundra this is a must

@imrikkibobbi 2 жыл бұрын

at this point i'm only towing a jet ski, when you say towing like a 5th wheel or camper or anything with significant weight vs 1 jet ski? i'm a brand new Toyota Tundra owner so i'm trying to be informed as best I can, thanks !

@gregkeller80 Жыл бұрын

Thanks a bunch! Gonna do this to my 21’….I’m pissed the deleted the zerks on the drive shaft as well. F’ers!

@dalephillips8250 3 жыл бұрын

Thanks for taking the time to make these videos....they are an extremely good guide which I will use if and when I add this to mine.

@davidwelty9763 Жыл бұрын

Great video. I think the Toyota engineers knew their business. It has been long enough since the deletion of the trans cooler that we would have heard of massive Tundra transmission failures by now. This has not materialized. Toyota is too hyper vigilant about their reliability reputation to do something reckless.

@joerivas9847 4 ай бұрын

Yeah right. GREAT job on the frames!!!!///

@gatornation3889 3 жыл бұрын

I have a 2016 Toyota Tundra crewmax 4x4 and lucky enough to have the cooler, I am disappointed that I do not have the trans temp gauge. Thank you for this video. We installed a cooler on my buddies 2020 TRD PRO using your advice, just wanted to say thank you sir.

@lrcreamer Жыл бұрын

I purchased the genuine transmission cooler kit for my 2021 tundra..came with the same Toyota valve but also included original Toyota hard lines and a cooler…must have if you tow

@danbaxa Жыл бұрын

Lawrence, What did that cost you? I just got an estimate to that job from the Toyota dealer where I bought our 2021 Tundra. 6.5 hours labor and $ 2000 for parts. I don't think that includes any Vaseline. They also said if I didn't use all the genuine Toyota parts it would void my warranty. I have about 16k miles on our SR5 DC that I do use for towing. Thanks in advance.

@lrcreamer Жыл бұрын

990 dollars kit from genuene tran i did the work step by step process on you tube

@danbaxa Жыл бұрын

I did get a call back from the dealership saying they had made a mistake on the estimate. Said they priced the job for a 2022 rather than a 2021 and that if I could come up with parts they could put them on in 1 hour. ?? Thanks for your reply!

@benjamincarter9726 3 жыл бұрын

Nice vid! Thanks, debating adding a cooler to my 19! Tundra

@DirtE30 3 жыл бұрын

Sorry for the low res guys, for the life of me I couldn’t get IMovie to let me upload or save the 1080p file... and the backlighting, sheesh...

@MrTaylorcraft 2 жыл бұрын

Where do you live in Kentucky? How much would you charge me, to put this on my 2019?

@kmalerich 3 жыл бұрын

Toyota screwed the pooch on the trans cooler issue. They will likely pay dearly for the mistake of allowing the bean counters to decide their engineering requirements.

@lanceshier741 Жыл бұрын

Follow the money

@marshmower 2 жыл бұрын

It's a slightly different part for the 4.6 4x4 which also didn't get a cooler starting back about 6 years ago. But regardless of model, lines can be attached directly to the trans. If you do that, bypass the coolant line. Otherwise they should have used a much bigger heat exchanger to keep the temps stabilized. Probably the fact that companies assume the end user is a dumb bag of cells.

@g2theb584 3 жыл бұрын

Thankful I got an 18 when I did.

@floridalife7564 2 жыл бұрын

Yea me too

@rickycantu519 Жыл бұрын

best video i’ve seen thanks

@hugosanchez-blanco4649 Жыл бұрын

This is a great video. It is exactly what i need and what i was looking for my 2018 Toyota Tundra 4.6L SR5. Thank you. can you show how to run the new hoses under to the new cooler. Than you..

@vxphan2601 Жыл бұрын

Thank you for the video. Very clear explanation. So. We have to put the pin back when we change out the transmission? How hard is it since we don’t have the space around to do it. Not very good design from Toyota Can we just leave the pin in it to keep the flow path open at all time?

@pecosb5221 6 ай бұрын

Thank you for the video but how much fluid did you added? And at what temperature do you open the level plug? Tks

@thomasdean5651 2 ай бұрын

Sounds like you routed the hoses without removing the skid plate. Is that correct?

@thomasdean5651 5 ай бұрын

Question from a novice....after installation, there will be trapped air in the hoses and cooler....is that not a problem?

@user-wb3mf8pe9v Жыл бұрын

Were can I buy the thermostat plate so i can install a cooler??

@pecosb5221 6 ай бұрын

The most important think is running low of fluid too

@rickycantu519 Жыл бұрын

i seen a video with a tundra going up the gauntlet in colorado and toyota said 246 degrees is normal for the transmission?

@binhlam410 Жыл бұрын

How’s the transmission cooler system doing? I’m thinking about getting one too

@johnspitta6725 2 жыл бұрын

Howdy. I'm in the middle of my install. I'm probably over thinking this. I assume the cooler is itself doesn't have a flow direction. Meaning. Fluid coming in and Fluid coming out could go either way. I'm pondering something.

@DirtE30 2 жыл бұрын

Doesn’t really matter but gravity is what it is as far as any entrained air.

@davydawg01 2 жыл бұрын

What diameter of hose did you use? How much transmission fluid did you end up having to add? Thanks for the videos! Much cheaper than other alternatives, and a much easier install.

@DirtE30 2 жыл бұрын

It’s 3/8” ID hose… as far as how much fluid it’s probably half a qt or so, I just had the dealer top it up the next day. It’s not enough to be of concern.

@johnspitta6725 2 жыл бұрын

14:06 Parker 801 Pushlock hose.... Is this the one? Specs look good. 801 Hose | 801-6-BLU-RL

@DirtE30 2 жыл бұрын

Yes that would work. It’s a blue color though. Not sure you want blue? If you just want black, it would be 801-6-BLK. Look up your local Parker Store, they should stock this.

@DirtE30 3 жыл бұрын

Parts list: Please note that I have zero affiliation with any of these... This is simply what I used, it is in no way a recommendation. Proceed at your own risk, as sad as it is that I have to even say that. Thermostat plate assembly: PN 3297034030 Cooler I used this time: 13 Row AN10-10AN Universal Aluminum Engine Transmission Oil Cooler Silver www.amazon.com/dp/B01H3G9EX2/ref=cm_sw_r_cp_api_glt_fabc_8HQYSPNMS1YV9Z48N2YY?_encoding=UTF8&psc=1 AN -10 x AN -6 adapters: EVIL ENERGY Female AN10 to Male AN6 Flare Reducer Hose Fitting Adapter Black www.amazon.com/dp/B01N5F6ICB/ref=cm_sw_r_cp_api_glt_fabc_PYGKMEZ8MDNPQWJEVA0X?_encoding=UTF8&psc=1 Can use any trans cooler hose, or a good fuel hose, not under any pressure, just needs to be able to handle up to 220degrees or so. Can use push in AN -6 female fittings readily available anywhere. I didn’t go into detail on where and how I mounted my cooler, I will try to capture that in detail in a future video.

@truthjustice3313 2 жыл бұрын

Great video. I had a 2016 and now a 2021 that I need to do this on. Can you confirm which of the two hose barbs on the thermostat cooler assembly is the output? Is it the top one aligned with the pin or the other one? I want to ensure that the output is installed on the bottom of the plate cooler. Also, is it ok to install everything totally empty and then top off fluid level in tranny plug? No concern with air bubbles / pockets? I'm still trying to figure out the best way to estimate the quantity of additional fluid needed. Thanks!

@DirtE30 2 жыл бұрын

It’s the one nearest the pin. The way I determined that was to pre fill the hose/cooler assembly and then pour it out and measure what comes out. Then add that amount after install. Won’t hurt a thing to install it dry.

@truthjustice3313 2 жыл бұрын

@@DirtE30 Great thx for the quick reply. I'm going to use DeRale HD hose the entire way as well instead of messing with the metal lines part of the way. Less connections and potential leaks. And using the Hayden 679 cooler. Should be a more efficient cooler than my OEM 2016! Thanks again.

@DirtE30 2 жыл бұрын

@@truthjustice3313 should be a solid setup. I’ve used that cooler before on my ‘19, was happy with the performance for sure.

@groth3395 Жыл бұрын

what is the purpose of the little pin? This is not clear to me. Sorry if I'm dense.

@DirtE30 Жыл бұрын

The pin is a manual override for the trans cooler thermostat.

@groth3395 Жыл бұрын

@@DirtE30 Yes I realize that. But is it removed after filling / checking trans fluid?

@DirtE30 Жыл бұрын

@@groth3395 oh sorry, yes, once you’re done, you remove the pin holding in the thermostat. It will then operate as intended and open at around 195f to allow circulation of the fluid to and from the external cooler.

@vzangla 3 жыл бұрын

sounds just like my 2020 like a damn diesel @18:44 what is all the racket?! thanks for the video just bought all the stuff.

@DirtE30 3 жыл бұрын

Lol… go hold your phone next to the oil pan of any running engine and report back…

@josephmartinez8786 2 жыл бұрын

How many ft of hose did you use

@DirtE30 2 жыл бұрын

15’ or so

@felixlavallee7146 3 жыл бұрын

can you give us the parts names ? im havin a 2020 sr5 in Quebec , and i want this setup . thanks for the video all is clear.

@DirtE30 3 жыл бұрын

See my “parts list” comment below... then watch my other video on the front cooler mount...

@Bicslife 2 жыл бұрын

@@DirtE30 I see no comment listed here that provides any parts list. Please help.

@DirtE30 2 жыл бұрын

@@Bicslife well… not sure why you can’t see it. You probably have your reply view filtered. Others have purchased the parts list already so I know it’s there, I can still see it too. I figured out how to screen shot and copy the text: Comments 16 × Thermostat plate assembly: PN 3297034030 Cooler I used this time: 13 Row AN10-10AN Universal Aluminum Engine Transmission Oil Cooler Silver www.amazon.com/dp/B01H3G9EX2/ ref=cm_sw_r_cp_api_glt_fabc_8HQYSPNMS1 YV9Z48N2YY?_encoding=UTF8&psc=1 AN -10 x AN -6 adapters: EVIL ENERGY Female AN10 to Male AN6 Flare Reducer Hose Fitting Adapter Black https: // www.amazon.com/dp/B01 N5F6ICB/ ref=cm_sw_r_cp_api_glt_fabc_PYGKMEZ8MD NPQWJEVAOX?_encoding=UTF8&pSc=1 Can use any trans cooler hose, or a good fuel hose, not under any pressure, just needs to be able to handle up to 220degrees or so. Can use push in AN -6 female fittings readily available anywhere. I didn't go into detail on where and how I mounted my cooler, I will try to capture that in

@Bicslife 2 жыл бұрын

@@DirtE30 IDK I have checked and double checked and I can't see anything with parts numbers... maybe put it in the video description as that would help a lot of people find quicker. Anyways, THANK YOU SO MUCH for the reply and help.

@DirtE30 2 жыл бұрын

@@Bicslife yeah, I tried. It wouldn’t let me.