1967 Ford Mustang quarter panel repair.
Рет қаралды 1,134
3 жыл бұрынThe bodywork continues. Instead of replacing the quarters, I decided to install patch panels. A lot of work is required to make aftermarket quarters or skins fit. More work than I thought was necessary or cared to take on at this point.
/ @jodaddysgarage / @greaserookie
@GreaseRookie 3 жыл бұрын
After all the wisdom and advice you’ve shared with me this past year, it was honor seeing you work. I hope there will be move videos to come. Great content.👍
@greifill 3 жыл бұрын
Thank you! This means a lot, coming from you. I intend to make more videos, for sure!
@rallycatgarageharvey1135 3 жыл бұрын
Very nice metal work ! I like the magnets and sheet metal clamps . I was watching and wondered if you could use the sheet metal clamp to hold a copper plate behind the gap .This may decrease heat and make it easier to fill the gap .Great video and inspiration to keep moving on my 68 .👍👍😎
@greifill 3 жыл бұрын
Thank you! I used the stitch weld magnets to hold the copper plate in place, since the magnets are seriously powerful. But I like the idea of using the other clamps combined with the copper plates I have. In some areas, the sheet metal is just stretched thin from stamping, corrosion or has been ground thin during previous bodywork. Having those copper plates saves a lot of time and frustration.
Братья автоподборщики
Рет қаралды 1,3 МЛН
Chandan_edit _n.3
Рет қаралды 13 МЛН