1969 Roadrunner FINALLY DRIVES and It's FOR SALE?!

Рет қаралды 108,564

Жыл бұрын

In what is likely the last video on this beat-up old classic '69 Roadrunner, my son JD and I craft and cobble together a mount for the alternator, driveshaft, transmission cooler, pan, filter, and lines. I mean, really, this car hates me! The cumulative effect of all the hassles of rebuilding and reviving this old muscle car has pushed me to the point where I am selling the car - YES, this Classic Muscle Car is FOR SALE for the low, low price of $4,000 - contact me if interested. Proceeds to fund the Holey Goat performance engine rebuild. No matter my frustration with the car, I am calling this MISSION ACCOMPLISHED! We pulled this abandoned car out of a junkyard and gave it a second gasp at life after sitting, left for dead, for some 25 or so years.
UPDATE 12/28/2022: The Roadrunner has SOLD!
The 1969 Plymouth Roadrunner project car was sourced from Nobody Else's Auto in Great Bend, Kansas. Find Project Cars For Sale here: rdkll.co/ProjectsParts or visit ‪@NobodysShow‬ on KZfaq: / @nobodysshow
► Remember to Like this Video, Subscribe to the Channel and Alerts, and Share with Your Friends!
► Join the Low Buck Club to see ALL VIDEOS EARLY!
www.youtube.com/@PoleBarnGara...
► Check Out My Other Channel 'Pole Barn Garage Reviews and More! / @outsidethebarn
• Get Pole Barn Garage Merch:
polebarngarage.myspreadshop.com/
• Follow @PoleBarnGarage on Instagram:
/ polebarngarage
• Join Pole Barn Garage on Facebook:
/ 164978548364151
► Support Our Partners:
• Roadkill Customs:
m.RoadkillCustoms.com or / roadkillcustoms
► Thank you so much for being here; every single one of you is appreciated!
#roadkillcustoms #plymouth #roadrunner #rolledrunner #musclecar #forsale

Пікірлер: 579

@raystevens1458 Жыл бұрын

I've seen many back yard mechanics, but you take the cake. If you're going to teach your son how to do things, then for gods sake. please teach right, safety, the proper use of hand tools. I couldn't even make 5 minutes, good luck and I sincerely hope you don't injure or kill someone.

@PoleBarnGarage Жыл бұрын

Phsh 😂😂😂😂 adios

@allgasnobrakes4979 Жыл бұрын

Man stfu and load the wagon and don’t worry about the mule he teaching his boy how to do something just because it’s not your way or by the book doesn’t mean it won’t hold to that young man’s heart

@rodneyclark1990 Жыл бұрын

Lol 😆

@BilgePump Жыл бұрын

Ray, your pills….

@ChuckPackwood Жыл бұрын

For Gods Sake, don’t spend time with your Son doing things you Enjoy. Ray Don’t approve.. .

@DadGrooves Жыл бұрын

On the 12th day of Christmas Pole barn gave to me… 12 self tappers 11 quarts of oil 10 to 1 compression 9 rebuilt engines 8 packs of smokes 7 lbs of toxic sludge 6 mouthfuls of gas 5 mopar matching numbers 4 feet of brake hose 3 broken driveshafts 2 bullet holes And 1 Cactus in the backseat!

@PoleBarnGarage Жыл бұрын

That's impressive my man!

@e.s.bryant765 Жыл бұрын

I can clearly see I am getting the 99 cents a month of quality viewing pleasure I expect from this high dollar channel.....lol.

@1961Bullet Жыл бұрын

That’s 98 cents per hour. 💰If you don’t believe me, check yourI bill. Are you related to T. S. Elliot? Asking for my sister. Hourly.😂

@NoNonsenseKnowHow Жыл бұрын

Best sales pitch ever! Lol. Somebody's totally going to buy that thing for 4K. I hope another KZfaqr picks it up so we can see more on this

@RattleTrapGarage Жыл бұрын

Yes

@jasonpetrich4141 Жыл бұрын

Dillan mccool is that you!!! I hear a Mopar calling

@bobadam7021 Жыл бұрын

Hey, you're another KZfaqr...With a bigger channel...

@NoNonsenseKnowHow Жыл бұрын

@@bobadam7021 I already have too many junky vehicles

@bobadam7021 Жыл бұрын

@@sonsofthunder915 that’s not what he said at all. He just doesn’t want it cut up for parts or use the vin and title. If you want to put 50k in it for a numbers matching trailer queen he’ll probably be happy to sell it to you.

@michellesheedy3199 Жыл бұрын

I love watching Dalton show JD how to do real world things that will be a benefit for his future. The lesson of how to work with his own two hands is a better education than JD could ever learn anywhere else. The love between this father and son is priceless!! I love this channel!

@marksman444 Жыл бұрын

Just found your channel a few days ago. Been binge watching your videos every night. Absolutely love them man great job Keep it up.

@PoleBarnGarage Жыл бұрын

Thanks!

@stevenvalentine9810 Жыл бұрын

Coming from a Road Runner fanatic I'm glad to see this one get a second chance at life. I have a huge appreciation for the work you and your son put into the Road Runner as well as the other vehicles and videos. I'm looking forward to seeing what you do with the van and Eagle. One more thing, if the Road Runner is "cursed," it couldn't have anything to do with being a Plymouth could it? you know, like that possessed '58 Plymouth Fury known as Christine.

@jamesausmusiii3386 Жыл бұрын

Those brackets looked way too nice for the car anyways. The jumper wire catching on fire was hilarious, you always got me LMAO.

@claztube Жыл бұрын

There is little left to say, seriously Dal'un, you said it all several times over. '...I'm not keeping this.' '...it's for sale!' Been one hella ride though, thanks for the cold weather indoor entertainment.

@texastimleister 4 ай бұрын

Man I love watching you and your son work on old cars it takes me about to a time when I worked on junk with my pop the only difference is my dad would get mad and curse the builders of the car.

@davebrown4438 Жыл бұрын

Gonna miss seeing the bird. But looking forward to what you have in the future. I can see your channel about to take off, so stick with it brother and I hope you make it

@PoleBarnGarage Жыл бұрын

Slow and steady my friend.

@sodsqad8089 Жыл бұрын

I like how on every project you check when filling to see if its pouring on the ground. I've been guilty of my tractor oil changes losing a quart or 2 because of the non existent drain plug.

@PoleBarnGarage Жыл бұрын

Even a dumbass like me learns eventually

@TomasaurusREKT 10 ай бұрын

Your son is gonna have these memories forever dude.

@lancemcswain214 4 ай бұрын

Dude you're killin me! The part where you were putting the new filter on the trans and said oh shit!! Where did it go? 😂😂 You are all of us!

@sarahkramps4574 Жыл бұрын

I about spit my whiskey out at the end when JD said “yeah uhh NO!” 😂😂😂

@wingdwolf56 Жыл бұрын

For years and years I would lay awake at night and dream of one day owning my very own ‘69 Roadrunner. That dream is now and forever over. Thank you! I can sleep again.😴😴😴🥱😴

@quicksilver8180 Жыл бұрын

Dalton,I see JD having a bright future with you on the channel and likely eventually his own channel later in the future. It's cool to me how much he catches on and plays out your sarcasm the way he does. Honestly most young men his age wouldn't be quite as savvy as he is to your crude style humor. Love the style, great content and really enjoy seeing you two interact in the shop together. Keep up the good work and great job with the camera JD. Wish I didn't live all the way over and up in NY so far away from all my favorite meta friends!

@paul96zj Жыл бұрын

This one made me laugh multiple times! Can't wait for the van!

@PoleBarnGarage Жыл бұрын

Great!

@dianaverhulst3407 8 ай бұрын

I'm so glad I went back and watched the entire series. Made so much sense. What I'm wondering is exactly how and when the transmission decided to actually give you first (and park) ... b/c the vid went from "no gears) to first/park and wild ride around the yard. Your son will remember these moments forever and will be retelling these stories to his grandchildren a half a century from now. Way to go Dalton. :)

@632Harrison Жыл бұрын

Don't feel bad my friend I couldn't roll a 7 even if I had loaded dice My garage is a tarp over what I'm working on and at current time I am putting new valve stem seals on my 03 ram 1500 4x4 with a 5.7 hemi ( she's fighting me all the way and I have 2 bad knees, legs swelled twice as big as they should be a major lower back issue You and JD keep up the good work I have a lot of respect for you both

@david929190 3 ай бұрын

FYI you can make a vacuum pump out of an old fridge compressor using nothing but the compressor, a cord end, some hose and an empty glass bottle possible sourced from your liquor cabinet. Then you'd never have to get a mouthful of gas again. Also you can measure crankshaft endplay with feeler gauges.

@jasonbose3507 Жыл бұрын

Thanks for bringing this iconic car back on the road! Perfect project for a cool tough Mad Max cars that scare children when it drives by because it's so scary tough and loud, perfect.

@chrissmith5354 Жыл бұрын

Cool that you got it to move. Hopefully it goes to Dylan McCool or someone who will make work enough to drive in "as is shape" and not someone crazy enough to fully restore it. Looking forward to the van build.

@chasebh89 Жыл бұрын

replace that banana shaped tensioner bracket with a hardware store eyelet turnbuckle and you got yourself a fancy schmancy "OEM Improved" adjustable alternator. done that swap a handful of times on tractors and it works just great

@kirkshorter4392 Жыл бұрын

I love watching you rescue these cars that otherwise would be rotting away.also love the farther an son building together that's so awesome you guys are a great team

@valleywoodstudio7345 Жыл бұрын

Hilarious - the car equivalent of Electroboom! Hope you also get a shop heater with the proceeds.

@aussiejake4647 7 күн бұрын

Watching you choke on those fuel lines really put a smile on my face... thankyou😂😂

@rickrice3221 Жыл бұрын

Dalton, I have three things to say: 1. I’m sorry I threw shade on your plan to use the GM alternator a couple videos back. As soon as I saw the all-thread pivot rod going back to the head I knew you were on the right track; that was my fix many years ago on my 318 ‘68 Dart sedan (AKA the best $250 I ever spent). I should never have doubted you - won’t happen again. 2. As a life long MoPar guy, I can say with confidence the Plymouth doesn’t hate you; it smells fear. 3. Again, as a MoPar guy, I have to say you’ve got it backwards: Sell the Goat to finance the ‘Runner (I know you would never concede to that) Another great video!

@PoleBarnGarage Жыл бұрын

SELL THE GOAT??????!!!!!

@rickrice3221 Жыл бұрын

@@PoleBarnGarage Ah, Grasshopper, I know it sounds extreme, but I had hoped working on the sacred Road Runner would show you the way to the Truth and the Light. Alas, it did not, therefore you must remove all temptation to backslide.

@Project_Low_Expectations Жыл бұрын

@@PoleBarnGarage he wants you to sell the goat… can you put him in pre-member status?

@justbuilditsh0p896 Жыл бұрын

Your stunned the goat has to stay It be like Derek selling independence it would just be wrong take your Mopar and start your own channel c how u do

@justbuilditsh0p896 Жыл бұрын

@@PoleBarnGarage no fucking way do not sell the goat

@fgialcgorge7392 5 ай бұрын

I know this is old but I'm gonna say it anyway, if you don't wanna deal with cables and are capable of making a few 45° to 180° brackets(just cut em out of something, doesn't really matter, I use an old truck frame), draw out what you think you need, use some decent all thread, cut it to length, put some cheap o-rings on it about every two-three inches, slide a piece of aluminum tubing over the all thread with the o-rings on it and cap it off with a properly sized heim. Make sure your bolts going through the heim are snug and you're good. You're brackets to get your angles just bolt anywhere that's open and make sure they have good, free range of motion. Usually only take 1-3 brackets depending on what you're doing, it feels way better, and you don't have to worry about cables.

@memphisreigns4663 11 ай бұрын

It's all about the memories. Good bad right or wrong this boy is going to have great memories and stories to tell about working on cars with his ol man. Bravo you MASTER of the butching. 😂

@russbilzing5348 Ай бұрын

I enjoy the fact that your cat keeps doing cameo appearances. I love the car, it's my kind of crazy and it was popular (and new) the year I graduated, but it would bankrupt me to drive it around the block, much less purchase it. Best of luck.

@blevins6584mopar Жыл бұрын

Thank you sir for all your efforts. I very happy to see her come back to life 😊

@WingmanJohnny Жыл бұрын

Heck yeah. You and the boy are doing fantastic. Keep up the great work and I will keep on watching

@danadribnenki8774 Жыл бұрын

Drilling out the u-joint yoke!?!?!?! You really are a genius and I ain’t just saying that! I don’t think I ever would have thought of that!😮😊

@terryeustice5399 Жыл бұрын

Congratulations on the movement of the 69 Roadrunner. It does run pretty well. And it may make a nice builder. Thank you for sharing! Sometimes it’s better to cut bait. And so right needs a transmission. And JD is honest.

@dirtpounder Жыл бұрын

That wonderful country "YEE-HAW" was a perfect example of the fun had by just winging it. Used to love doing this sketchy crap with my dad and uncle.

@chrisheckle7404 Жыл бұрын

It’s great to see it moving under it’s own power. Nice work!

@Freedomquest08 Жыл бұрын

I've had cars that hated me, so I understand the feeling. One was a '77 Firebird. That car thought having a good time meant to stall and not restart for 45 minutes in the worst places possible. Really though, that car's problem was mostly the brand new design spread bore Holley 2 that I fought and fought and fought with, replacing a blown power valve with almost every tank of gas. There is a reason those carbs were only made for a very short time, then the Holley 2 name was moved to the remanned OE carbs to save face. The other one was an '86 IROC Z/28. That one thought I was it's sugar daddy. The first 3 months I owned that POS I replaced the radiator, the engine and the cat (smog testing where I lived). Never had any problems like you're having with Mopars, but it could happen. Back in the time when cars had personality, it does seem that they almost all had their own spirit. Some were not so nice.

@rajcam80 Жыл бұрын

Totally worth the effort! Congrats!!!!

@kirkbrown8389 Жыл бұрын

Excellent budget build and a awesome father and son project. Keep up the good work. Sell it as soon as you can.......

@gimmefuel7268 Жыл бұрын

How bout that bonus kitty cat footage at the very end!! 😁😜😜

@duckscustomgarage9239 Жыл бұрын

It is really good to see that PBG always ware the proper PPE when he grinds on things LOL .

@Shanetheplumber Жыл бұрын

Glad I found this channel, reminds me of first garage I worked on my stuff in, didn't need floor dry because what I drove daily had enough dirt and rust falling off it to use for clean up and I think they used a 2x4 to finish concrete floor and I used whatever gently used (junk) parts I could find because I was broke and had to get to work in the morning

@bradwinter156 Жыл бұрын

That smile on your face during the last joyride was reminiscent of Jack Nickelson in the "shining" that car had you possessed.

@PoleBarnGarage Жыл бұрын

Kinda how it felt, too.

@JeffKopis Ай бұрын

Nicholson.

@ProjectRescues Жыл бұрын

Dylan McCool may want that car. Contact him and see if he wants it. He's a mopar guy on youtube located in TN. This car is right up his alley. Its a shame you didn't get it on the road again though.

@PoleBarnGarage Жыл бұрын

Been talking to him

@THROTTLEPOWER Жыл бұрын

Enjoyed great vid!!

@rickylaporte6750 Жыл бұрын

It was awesome seeing you and your Son get the curst of a Mopar runner lay a cross on it maybe that will fix everything. Happy Holidays to you and your family.

@skipsdarkhollowgarage8695 Жыл бұрын

Let that one go, you did what you said, it rolls under it's own power, time to get on to a project that gets "YOUR" excitement flowing, that in turn gets us in it with you, and maybe a "lightning strikes twice" series of a build for you to draw in more folks and have a blast doing it 😎

@mdc32073 Жыл бұрын

I've just started watching this channel and am really enjoying it. Just pressed play on this video while taking a quick sip of my drink and needless to say the drink didn't stay in my mouth. This is probably the best intro/start to a video I've ever seen.....LOL

@brcron007 Жыл бұрын

You my friend have become a proven seasoned putter back on the roader amazingly talented modest artist. I really, really look forward to you building that bad ass "70's Vibe Cool Van" It should and I bet will be an all out Hum Dinger ! 👍👍👍💥

@TheRnorman33 Жыл бұрын

Looking forward to the van and Eagle projects! Good job on that wreck I hope it lives on

@earlparsons9653 5 ай бұрын

Thanks for getting back to me that means a lot to me love your videos God bless 🙏

@ianlegrand3450 Жыл бұрын

🤜💥🖐️🤘them maypops looked good spinning out in the grass

@Project_Low_Expectations Жыл бұрын

The car was rolled and presumed dead. Then, what ever life it had left was burned, and never taken to the burn ward. It was enjoying its dirt nap. Then you come along throwing parts and self tappers at it. It’s not cursed, it wants to go back to sleep. Put this one on market place, and let’s get some van shenanigans going!

@tjvee2625 3 күн бұрын

Dude. You’re gonna get the nickname lefty with all the free hand grinding.

@billbong156 Жыл бұрын

Ready for the van content. That thing is awesome!

@sourshoes6768 Жыл бұрын

Get rid of the curse, ready for that van!!

@mikebrown8065 Жыл бұрын

Total respect for you getting it running again for the first time in 30 years!!! If I just had the cash. Seriously. But unfortunately I need to complete another project that's been plaguing me since 2012, lol. I just have to see it through. 1970 Mercury Cougar Eliminator that I saved from the Crusher!! Can't wait to see the Vansformation!!!

@auteurfiddler8706 Жыл бұрын

I'd like to see that Cougar myself!

@mikebrown8065 Жыл бұрын

@Auteur Fiddler , unfortunately it's not even a good parts car. But the "story" behind it is the ONLY reason I want to see it through. It is rotted out horrible, but the original owner purchased it 05/25/70 and had it only a short time before being drafted into Vietnam; according to the second owner's brother and his best friend. The brother also said that every year he and his family around the holidays would go up to their grandparents house and see it sitting under a pine tree next to the garage. Every year, they would knock on the door and ask if they would sell it. The old couple would say no it was their son's car and they wouldn't sell it. Fast forward to November of 1982, same thing, but the old lady said to them, my husband recently passed away, so give me your name, address, and number and I'll leave it with the title. I am not well, and I'll leave a note with it. ". Once again this is what I was told. Anyway, the beginning of May, 1983 "John" was notified by mail from an attorney that he could buy it from the estate. John took a loan from the bank ($2,146.40) and purchased it 05/25/1983. He put a lot of work into it (they said about 1.5 years until he could drive it) repainted it, wrecked it, repainted it again, and wrecked it again. Unfortunately as he was repairing it for the second time, he passed away suddenly. I don't know when exactly. I purchased it 05/23/2012. It was stripped of all the "Eliminator" specific parts and it had a '69 nose bugger welded on it. I found another 70 Cougar parts car and transferred the parts to make it run: until my buddy and I were just about to go for a ride, something wasn't quite right with the steering. The frame rail was rotted out horrible where the power steering mounted. THE FRAME RAIL WAS COVERED BY METAL TAPE AND SPRAYED OVER WITH UNDERCOATING 😳😱☠️☠️☠️ So out of respect to the first owner who I was told is considered to be MIA/POW of the Vietnam War, I felt that the vehicle deserved to be redone as a respect for our veterans who gave the ultimate sacrifice for our country. My way of saying thank you for your service. God bless.

@auteurfiddler8706 Жыл бұрын

@@mikebrown8065 Cougars of that era are sometimes available in the So cal desert area. I think there was a rust free one in the High desert that the guy wanted 2000 for. Not a hi po car, just a basic one.

@seanfritz1355 Жыл бұрын

One thing About a mopar transmission. They make a wonderful amount of clutch butter.

@enigmareach1129 Жыл бұрын

Love your channel friend! Reminds me of me and my buddies doing budget work back in the old days. Complete with half drunk bottles of RC cola lying around. Approved!

@alanh1406 Жыл бұрын

As someone who has worked on antique clocks, I can totally understand were you are with this car. Sometimes those stupid things will not work no matter what I do! It gets to a point we’re I throw them back in the case and send them down the road to the next guy.

@paulmullins4439 7 ай бұрын

Great video enjoy watching keep up the great work

@dantiegen5622 Жыл бұрын

You are correct, some projects tell you if they want to be saved or they are perfectly happy rotting to death, this one gave you all the signs of which way it wanted to go!

@goodtimefishing1005 3 ай бұрын

Well it looks good with the white letters out on the tires. I enjoy your channel. You are a super genius.

@ChristisGOD1611 Жыл бұрын

I gotta tell ya bud. I started watching KZfaq car videos years ago when Puddins Fab Shop and VGG were small and watched them explode and get sponsored etc. But I miss the ingenuity of just getting it done however with some comedic relief not just throwing money at the problem but making do. Your channels great and I'm cheap but I may buy a hat

@PoleBarnGarage Жыл бұрын

I appreciate that bud

@DS-Turbo Жыл бұрын

First time watching your channel. Highly entertaining. I'm subscribed so I'll be watching slot of your videos to catch up to present. Love the longer video's

@PoleBarnGarage Жыл бұрын

Thanks man!

@lietus4192 Жыл бұрын

This is ganna be someones fun car thats for sure

@kadend8980 Жыл бұрын

Excited to see more of the van!

@AndrewByrnes-iv5dn 10 ай бұрын

I'm sure you can show it on the tube but I'm sure JD has some fun in that field in those old cars himself

@KiwiStag74 Жыл бұрын

That Roadrunner reminds me of an old joke: A Texan visiting a watering hole (aka: a pub) somewhere in NZ: "You know, I've been looking at the size of the land around your houses here and I gotta say that back home I can get in my truck, fire it up and drive all day without getting from one side of my land to the other." A young Maori bloke (listening to the Texan): "Yeah, I had a car like that once too, eh....." You got it to move, declared a victory and moving on.....and fair enough too, mate. Like you said, for some reason the Rolled Runner just doesn't seem to like you and fights you with every erg of its being. Some builds are like that......and some you win, some you lose.....but they all teach us something......like "maybe it wasn't such a good idea to begin with". I've had a few of those revelations myself.....and it hasn't helped a bit when it came to the next time I saw a project that I thought I could do something with! On to the White Vantastic!

@dynomitegliatti7811 Жыл бұрын

was hoping to see more on this car roadrunner is my favorite mopar but as someone that has limited funds and patiance i understand.. wish i could afford to buy it i would get it running and safe to drive for a daily wtg Dalton you got it running and driving

@wayneborden594 Жыл бұрын

"Wanna see if it's pouring on the ground?" "No,not yet" l lol

@jameswoolston1415 Жыл бұрын

Great content. An haveing your son. Being part of your content. Keep up the great vidios!!!!

@markkorhin5510 6 ай бұрын

Another great video Dalton

@jasonandamanda1977 8 ай бұрын

I love watching you're channel I watched the rolled runner all weekend

@PoleBarnGarage 8 ай бұрын

Awesome thank you!

@fgialcgorge7392 5 ай бұрын

Man, you know you're American when those 'yee-haws' start slipping out.

@chancepatrick6260 Жыл бұрын

Awesome video..

@pcbullets8726 Жыл бұрын

The Turdrunner lives! Amazing that thing even goes at all. If there was a car that need to be shot and put out of its misery, it's this one hahaha! That being said, thanks Dalton for the videos on this one. Can't wait to see the van and the Eagle next!

@Pushrod_Criff Жыл бұрын

IT’S ALIVE!!!!

@jakebullet8990 Жыл бұрын

"Kind of a professional"? Keep them coming Dale. 😆

@robbrcnstuff4220 10 ай бұрын

I've been watching the videos for this car and it's been really interesting, I've been watching some of the eagle stuff too. That's a lot of work, good job. 😎👍👍

@michaelmissett3583 Жыл бұрын

Hey, I used one of those kick down cables on The 1980 F100 I built. It works great.

@jeremyTallen1 Жыл бұрын

Can't wait to see the 4×4 van!

@michiganporter Жыл бұрын

My favorite is when my cigarette ash falls in to what I'm working on...like when I paint stuff. It adds to the surface strength of things.

@PoleBarnGarage Жыл бұрын

Indeed

@BilgePump Жыл бұрын

God Bless the person that takes on this project and don’t forget.. “That shit’ll buff out.”

@Ramztothaz 3 ай бұрын

Am I the only person that noticed the 2 rounds of 22LR in the catch pan at 27:54? This raises questions.

@jonnyrocket Жыл бұрын

Another epic Episode... this is true entertainment..

@tandmbros5877 Жыл бұрын

Im just sittin here tryna enjoy my morning and your making me want to wrench on something lok

@Cascadian_Atomic_Auto Жыл бұрын

So glas i found this channel. Been binge watching all the videos.

@PoleBarnGarage Жыл бұрын

Awesome!

@onceashadetree8833 Жыл бұрын

Since Im a new subscriber and watched every Holy Goat and Rolled Runner video (and the 59 ford compilation) Ive gotta say Ill miss the Runner. I'm mostly a GM guy but I like Mopars as well. I liked what you did to that Ford by the way.

@hughlannon61 6 ай бұрын

LOVED the GYC parody. It was great.

@RattleTrapGarage Жыл бұрын

I guess that 1.5 percent chance was what the transmission chose 😎

@michaelstone8882 Жыл бұрын

That's a car you buy and it makes you become a KZfaqr!!!!! And start showing your own work on cars that you've been putting off for ever!!!

@michaelstone8882 Жыл бұрын

Awesome video guys. Can't wait for more cool shit..

@natedillard7353 5 ай бұрын

Oh I see the starter solenoid power Wires appear reversed .. like the lightening show as well . I’ve done that a few times lol… Love the channel bud !

@TazR6 10 ай бұрын

48:41. Just for that one look, this whole thing was worth it. You got your money's worth out of it. It is literally written on your face. I have really enjoyed this series. Each episode was funny, well edited and incredibly entertaining. Neil :-)

@fdholley Жыл бұрын

That "kind of" was picture perfect timing 😂🤣

@That70sChannel Жыл бұрын

Sounds MOPAR good. Bo and Luke would approve of spinnin' those tires in a field.

@jasonpetrich4141 Жыл бұрын

Function over form big guy!!! If it's works it's fine. And looks like sweet baby rays bbq sauce in the trans pan!!! Thanks for the fun ride with it , and some yard cookies. On to the next magical endeavor. And the magnet is factory in the pan. It's for picking up fine metals most trans have em

@PoleBarnGarage Жыл бұрын

Never seen a gm trans with one, they must've been a little more confident lol

@jasonpetrich4141 Жыл бұрын

@@PoleBarnGarage my 700r4 had one. They are flat though not round like spearker magnets

@jonathanmoore7472 11 ай бұрын

1st I love watching the channel to detox from work 2nd if I ever have a chance to buy one of your cars remind me I don’t want to have the next owner problems

@PoleBarnGarage 11 ай бұрын

I would definitely advise you to do that