1998 Xtant 1001dx Unboxing, Review and Amp Dyno Test [4K]

Рет қаралды 20,363

Күн бұрын

#xtant #ampdyno #caraudio
Throwing it back to the late 90's and this Xtant 1001dx graciously sent to me by Brantley Waites of Elite Audio in Lexington, SC. I've been wanting to test an Xtant amp for a while now and this 1000W monoblock seemed like the perfect one to try out.
Ratings are as follows:
250W at 4 ohms
500W at 2 ohms
1000W at 1 ohm
Regulated design 11-15VDC
Original MSRP: $1199
Big thanks to all who contributed to info for this video:
Johathan Ivey - Mitek (MTX) President
Don Ciardullo - Former Xtant General Manager (mid-late 90's)
Brantley Waites - Elite Audio (former SPL Champion)
Shawn King
Mark Eichenlaub
Chris St.Aubin
Alan Lindgren
K.E. Landis
Video Index:
0:00 Unboxing the Amp
0:45 Magazine?
2:29 Exterior of Amp
3:23 History of Xtant
5:34 What's Inside?
8:21 Setting Input Sensivitiy
8:59 Other Settings
9:42 Powering Up the Amp
11:19 Amp Dyno Tests
15:50 Thermal Imaging
16:09 Final Thoughts
17:20 EXTRAS
Other videos of interest:
Precision Power 2350DM vs Alpine 3545: • 1989 Alpine 3545 vs Pr...
Precision Power A600 and A404: • AMPLIFIER ART? 1994 Pr...
Precision Power 2300AM: • 1991 Precision Power 2...
JL Audio 500/1: • Best Selling Car Audio...
Like these old school amp videos? Support me for more like this.
/ oldschoolstereo
Shop for Down4Sound Amps: is.gd/D4Samps
Shop for Savard Hi-Q Subwoofers: amzn.to/2Nh1qcf
➡️ Support OSS / Williston Audio Labs for early access to videos: / oldschoolstereo
One Time "Tip" for Video Support: paypal.me/BigDWiz
📒 Show Notes, Video Gear List and Resources 📒
Make sure you are subscribed to my channel so you'll receive notifications when I upload the next exciting video! Thanks for your support and remember to keep it Old School!
Subscribe to Williston Audio Labs / OldSchoolStereo Here: / bigdwiz
⚡ Williston Audio Labs on Social Media:
www.oldschoolstereo.com
www.willistonaudio.com
/ oldschoolstereo
/ oldschoolstereo
--------Cameras and Gear Used To Shoot This Video ------
(Video Gear I Use)
Camera - iPhone 13pro 1TB - amzn.to/3nCjGvc
RODE Wireless Go II Microphones: amzn.to/3Q6NVHl
Shure MV7 Microphone: amzn.to/3A4OICK
Zoom H4n Audio Recorder: amzn.to/3BXjVsS
960 LED Panel: amzn.to/2Sxoq3S
This VIDEO was EDITED with LumaFusion on an iPad Pro 12.9:
iPad: amzn.to/2Ancr1W
Software: goo.gl/6yvWss
-------- Test Bench Equipment ------
SMD / D'Amore Engineering Amp Dyno: goo.gl/sJTcf7
XS Power D1400 Batteries - amzn.to/2BPFCKW
XS Power PSC60 Charger - amzn.to/2CHGcfs
Fluke 1000A AC/DC Clamp Meter: amzn.to/2Rw5WDA
Handheld Dyno: amzn.to/2u2EgKV
My Favorite Screwdriver Kit: amzn.to/2x0VzcE
DISCLAIMER: This video and description contains affiliate links, which means that if you purchase from one of the product links, I may receive a small commission. As an Amazon Associate I earn from qualifying purchases

Пікірлер: 262

@wal2 2 жыл бұрын

*Other videos of interest:* Precision Power 2350DM vs Alpine 3545: kzfaq.info/get/bejne/jMiWddp928fOZHk.html Precision Power A600 and A404: kzfaq.info/get/bejne/jqtiqNiKkuCve3k.html Precision Power 2300AM: kzfaq.info/get/bejne/raqpasuKxs2ufZ8.html JL Audio 500/1: kzfaq.info/get/bejne/eLKWktB1t5qqdIU.html *Video Index:* 0:00 Unboxing the Amp 0:45 Magazine? 2:29 Exterior of Amp 3:23 History of Xtant 5:34 What's Inside? 8:21 Setting Input Sensivitiy 8:59 Other Settings 9:42 Powering Up the Amp 11:19 Amp Dyno Tests 15:50 Thermal Imaging 16:09 Final Thoughts 17:20 EXTRAS *Like these old school amp videos? Support me for more like this* www.patreon.com/OldSchoolStereo Shop for Down4Sound Amps: is.gd/D4Samps Shop for Savard Hi-Q Subwoofers: amzn.to/2Nh1qcf *Video Gear I Use* Rode Wireless Go 2 Microphones: amzn.to/3P6eyv4 960 LED Panel: amzn.to/2Sxoq3S This VIDEO was EDITED with LumaFusion on an iPad Pro 12.9: iPad: amzn.to/2Ancr1W Software: goo.gl/6yvWss *-------- Test Bench Equipment -------* SMD / D'Amore Engineering Amp Dyno: goo.gl/sJTcf7 XS Power D1400 Batteries - amzn.to/2BPFCKW XS Power PSC60 Charger - amzn.to/2CHGcfs Fluke 1000A AC/DC Clamp Meter: amzn.to/2Rw5WDA Handheld Dyno: amzn.to/2u2EgKV My Favorite Screwdriver Kit: amzn.to/2x0VzcE _DISCLAIMER: This video and description contains affiliate links, which means that if you purchase from one of the product links, I may receive a small commission. As an Amazon Associate I earn from qualifying purchases_

@joshholden8561 2 жыл бұрын

Big d I'll trade ur alpine 3545 for the xtant amp lmk if ur interested.

@K-Effect 2 жыл бұрын

Excellent video. I wanted these amplifiers so bad back in the day but they cost more than my car at the time. Polished stainless steel with the brass screen…beautiful! Still one of the coolest style/designs around

@wal2 Жыл бұрын

They say it’s polished stainless but man it sure looks chrome to me. Maybe a deep polish and clear tho

@positrack99 11 ай бұрын

Lucky you passed on them as they are trash at that price.

@lambertleigh2724 2 жыл бұрын

WOW!!!!! I REMEMBER THAT MAGAZINE!!!! AND that van with em Cerwin Vega strokers!!!!! Wow....juuuuusT WOW... is all I can say...!!!

@wal2 2 жыл бұрын

😬👍

@lloydhudson6463 5 ай бұрын

Yeah, me too, I always wanted a couple of those Cerwin Vegas. I always heard good things about those strokers.

@StockA4 2 жыл бұрын

I love that Carolyn had a hand in the design. Such a special lady.

@wal2 2 жыл бұрын

Agreed and the world misses her beautiful soul 🙏

@mugendrewable 2 жыл бұрын

... You really pulled on some heart strings with this video... Thank you, Sir. You started with the mention of U.S. Amps. I collected some trophies with these as well as MATTS. Sound quality. Prior to those came the four 2350DM's powering a Cerwin Vega real deal Stroker. One amp, one sub. For Strokers, four amps. Next up you showed an input panel close up of a JP34ab... OMG!!! I will have two of those arriving next week😁❤️💕😁 On to the XTANT. You really did not drive the point into your viewers heads that all of the options that were available as plug in daughter boards are what is available today out of box from any decent quality amp. Back in the day this was a one box option that covered all those boxes and rca's we had to deal with. At the time the concept was greatly MISUNDERSTOOD!!! The other amplifier manufacturer that was also misunderstood was BLADE. I haven't finished watching the video yet but I'm very curious to see what your opinion is of the sound quality😁, even though it is a sub amp... !!!THANK YOU CHRIS St. AUBIN!!!

@wal2 2 жыл бұрын

Thanks for watching and commenting!

@pedgeraldes Жыл бұрын

So happy to have one of my amps reviewed by you, Big Dummy!! Cheers..

@danielhillwick8430 2 жыл бұрын

I remember back in the day when Xtant amplifiers first hit the market. They were the hot ticket for the SQ guys. I did a full build using Xtant amps and jail audio speakers in a 96 f150 extended cab. It was a stealth install everything folded up in the back seat. The back of the seat was the amp rack the bottom of the seat was the subwoofer box with two down firing 10-in JL audio subs. When the seats were folded up you couldn't tell there was anything installed. It looked like a factory finish seat. Thanks Big D enjoyed the video it brought me back to the day.

@wal2 2 жыл бұрын

Thanks for watching and commenting!

@DamonDupriez 2 жыл бұрын

When I had to bench test Xtant amplifiers for my reviews here in Australia in the late '90s the jumper system controlled input sensitivity was a real headache. I had to juggle input voltage to the power supply (via a variac) to get 12 or 14.4V and simultaneously monitor the waveform on the oscope along with the AC voltage on the meter connected to the outputs. Man that was tricky - especially pon the 4-channel! I also remember these amplifiers clipping pretty harshly on the waveform compared to other amplifiers. I was introduced to Jeff Scoon by Mitek owner Lloyd Ivey while at MTX Arizona in Jan 1998. Lovely guy. Xtant stuff certainly was cool and unique back in the day. Nice one Big-D.

@wal2 2 жыл бұрын

Thanks for the info, really cool 😎

@joseiracheta3817 Жыл бұрын

Those amps were awesome. Great sound quality and power. Looked good as well.

@positrack99 11 ай бұрын

Awesome? $1000 for pin switches?

@kswis 2 жыл бұрын

I personally haven't had an issue reading the voltmeter and I LOVE when I can see amperage vs wattage in the same frame. The amp is way cool. I'd maybe even say it looks like a current high endish amp. Very cool n it did well considering how old it is. Cool guts, look, ect ect

@wal2 2 жыл бұрын

Thanks brother 🤙

@tifflynn2215 2 жыл бұрын

I sure miss them car audio magazines ❤️

@wal2 2 жыл бұрын

Agreed!

@jasonbear681 2 жыл бұрын

Yeah..that's the first thing customers do when they take their car home from the install shop is Jack up every bass boost they can..then bring it back in 2 days with everything blown up..

@volvo09 2 жыл бұрын

Haha, yep, levels so high that even with the volume real low a pop from someone talking on the radio causes the subs to bottom out... I had a friend with a setup like that, it sounded terrible.

@wal2 2 жыл бұрын

At least with these once installed the customer didn’t have easy access to the settings

@justinhiggins2210 2 жыл бұрын

I remember back in the late 90s Sony was putting their xplode line in some new cars, they would put rtv, gasket maker on all of the adjustment pots. Those were the days.

@sonicgauge1 Жыл бұрын

When I was installing part of the deal was a conversation that started with somthing like "its your system but your not allowed to touch it" and why..

@therealmakmillion 14 күн бұрын

@@justinhiggins2210 I still do this, and have since the late 90s. I’ve saved many people from themselves lol

@FATHERSOFBASS 2 жыл бұрын

So this amp was ahead of its time it had the options for everything that comes normally on almost any amp now sooo crazy

@jimb4547 2 жыл бұрын

I had that amp running 2 12” pioneer subs in a custom sealed enclosure in my Nissan truck. It killed. I wish I still had that!!

@wal2 Жыл бұрын

Awesome 👏

@Guiltless765 Жыл бұрын

Ahhhh the good old "dream magazine's" from back in the day.

@wal2 Жыл бұрын

Yes! Dream a little dream and wonder how some of these folks had the cheese to do these crazy installs

@wutupclegg6618 8 ай бұрын

This was the only amp where the company brought out a rep to train all of us, installers, on how to properly install and tune these things. After a few, you get the hang of it. You start to learn which SIPS to change out and which ones to use. The SIPS are the black crossover components.

@z1berzerker 2 жыл бұрын

Xtant was the deal 👌 back then. Had some Hexagon 12's on 500rms, superb accuracy

@alkosmo2692 2 жыл бұрын

I have the 10's hexagonal's in my 97 mustang Cobra. Self made custom box, bass vent tuned to 46hz per Xtant suggestion when Jeremiah (Xtant) and I used to talk

@z1berzerker 2 жыл бұрын

@@alkosmo2692 Awesome 👌 to hear Bro... I got my Xtant 12's at Audio King 🤴 lol out of biz now... built a 40ish hz box... pounded them daily for a few years. Until getting groceries ended up pulling a RCA partially out and smoked the coils hard. So yah great subs of yesteryear 👍😊

@oldguysgarage5874 2 жыл бұрын

Always wondered about those then someone on FB asked the other day, greatly appreciate your videos and bringing old school back into the light

@wal2 2 жыл бұрын

Thanks for watching and commenting!

@weesebowski8651 Жыл бұрын

The right subs and they are nasty!

@hadbl12 2 жыл бұрын

Beautiful amp… thx for the test

@wal2 2 жыл бұрын

Thanks for watching and commenting!

@dowboykfx470 Жыл бұрын

Man how the f I miss this upload. Thank big time for sharing

@wal2 Жыл бұрын

Thanks for watching and commenting!

@alpine2k355 2 жыл бұрын

I kept my Xtant 403A that was in my truck for 15 years. Still works great. Wasn't the loudest system I had, but it sure sounded good.

@wal2 Жыл бұрын

Awesome 👏

@AZBaby420 6 ай бұрын

Oh man that is beautiful!! I had one back in the day for my 1st gen Rockford P3’s!!

@nowerlater 2 жыл бұрын

Finally Big D got an Xtant! Great video as usual!

@wal2 2 жыл бұрын

Thanks for watching and commenting!

@paulgood2218 2 жыл бұрын

Been waiting to see a xtant amp Dyno good show

@wal2 2 жыл бұрын

👌😬👍

@NVzla 2 жыл бұрын

I still have a pair of Xtant 8ohm 10s somewhere in a box. They always sounded very clean, in a sealed enclosure. Thanks for giving Xtant some attention.

@wal2 2 жыл бұрын

Thanks for watching and commenting!

@hm008vaj Жыл бұрын

Great video! Loved these amps from my teenage years. I have a few waiting for an old school build. (1) 1001dx, (2) 604x, (2) 3150c, (1) 603x, (1) p500a eq, & a box of SIP chips & jumpers.

@jeremykeith6541 7 ай бұрын

I had a 300 or a 500 back in the day. Had it on two 10s in a bandpass box, and boy did it pound. Got a lot of headaches from police pulling me over. Man have times changed.

@weesebowski8651 Жыл бұрын

Over 20 years ago I wanted an Xtant system. The 10’s and subs I wanted along with install was about $2000. Ultimate electronics was the install but I never was able to afford it. But this is awesome!

@LBCAndrew 2 жыл бұрын

I remember these amps back in the day. I always loved their design. Never got the chance to buy one though since i was quite content with my soundstream reference 1000s and 500s. Great amps, and i still have both.

@ronskopitz2360 2 жыл бұрын

Back in the day I had a pair of Xtant amps running McIntosh speakers up front and a pair of PPI flat cone subs in the back of my ‘94 Trans Am convertible. All running through an Audiocontrol EQ. I spent an asinine amount of money, but I was young and stupid. And it sounded amazing. I must have been an early adopter without knowing it, because I’m pretty sure I bought them in ‘95. They were absolutely gorgeous. Thanks for the review - it really takes me back!

@wal2 2 жыл бұрын

Awesome 👏

@nunyabizznizz7326 2 жыл бұрын

Big D for the win! as always, great vid👍👍

@wal2 Жыл бұрын

Thanks for watching and commenting!

@wiredperformance6130 2 жыл бұрын

Finally a xtant amp! I miss these old beasts!

@wal2 2 жыл бұрын

😬👍

@jeremybreger4818 Жыл бұрын

That name instantly brought back late 90s Termpro Website vibes.

@jasonjackson329 2 жыл бұрын

Ahhh DAM. You’ve done did it. Finally - I loved my 1001. Ran it with a 404. And a 4180 or something can’t remember. But man did I absolutely love these amps. Best looking amps ever made. And if you had the module chips too. I just wish I could have got the 🛑 shaped subs they made. I ran mine with JL 15’s. 2. And alpine deck and ORIGINAL MB Quart mids / highs.

@wal2 2 жыл бұрын

Thanks for watching and commenting!

@Toyotajunkie 9 ай бұрын

I wanted one of these beautiful bastards so bad! But even at $850 (discount etc) it was too much for my income. I'm glad someone was awesome enough to loan it. Thanks for sharing!

@jasondrew6369 Жыл бұрын

Great video. I got one of these amps in '99 pushing a pair of JL 10W6 that were in a huge box for some reason. No one really knew anything about the amp at the time including me but it was definitely a hit.. .especially back then. I really don't remember exactly what happened to it. I'd be willing to guess I needed some trunk space after having kids.

@keithmorris2366 14 күн бұрын

I'm doing a build with a 1001 dx and a 604x on a JL 13w3-2 with 2 pairs of old school 6.5 JL xr components with audio control eqx and epicenter. Yeah I know it's cheating but sounds good! The amps are complicated especially the 604x. It's been 20 years since I've had them hooked up. Looking forward to completing it. Thanks for the video. As always you learn something.

@dextermorgan1 Жыл бұрын

I remember that build with the Strokers in it. I saw it in other magazines back in the day.

@Adam-nv9zo Жыл бұрын

Wow I pass right by Elite Audio on a regular basis. Gonna have to stop by and check them out.

@VisionSoundPDX Жыл бұрын

Williston I had an Xtant 10” hexagon sub a few years ago I wish I still had it cuz I’d have sent it to you. It was a monster of a 10” it was from prior to the MTX buy out.

@lukeconnor2843 2 жыл бұрын

Absolutely love all the old School Xtant Amplifiers😃

@wal2 2 жыл бұрын

😊👍

@TheLassenman 2 жыл бұрын

Very interesting amp, both in the looks and lay out. But awesome power it put out also :)

@wal2 2 жыл бұрын

👌😬👍

@grominwithrob1339 Жыл бұрын

Reminds me of all the BMW's in the 90's car audio mags sporting Xtant amps and JL Audio subs in a stealth install.

@paulcabinatan2390 2 жыл бұрын

These amps were the precursor to the JL Audio Slash amps. Used to work with these a lot when I was working with Mitek back in the mid 2000’s. We used to have massive supplies of the sip chips. Have the later model the X1001 in storage.

@brentb5303 2 жыл бұрын

I’ve been waiting for an Xtant to go on the dyno. I’ve been wondering about the 3300C because it’s rated at 600 watts with 120 amps of fusing. Very interesting and informative video.

@wal2 Жыл бұрын

Oh man that one could be underrated for sure!

@joesegala1856 29 күн бұрын

I have a MINT one these in my FJ cruiser amp#28 off the production line , with a Balanced Line module and an LQF45 Boost Module , putting it to one Resilient Sounds RS12 Gold, Still HITS HARD , and Cleaner than Most everything on the market

@volvo09 2 жыл бұрын

Cool amp! Piece of history.

@wal2 2 жыл бұрын

For sure!

@alkosmo2692 2 жыл бұрын

I have this exact amp amoung other Xtants. I used this one to power 3 MB quart reference 10's in my Expedition for about 10 years, never any issues. I retired the amp (stored in a box) and reduced the size of my system to meet wife's demands 😞 I also have the 604 (larger 3 channel or 5 channel with the module) never used Thanks D, good history on these

@wal2 2 жыл бұрын

Thanks for the feedback 👍

@MyBlowncobra 2 жыл бұрын

Wonderful amps..I had the 3 channel.a buddy still has it

@wal2 2 жыл бұрын

👌😬👍

@sirsnappz5307 Жыл бұрын

One thing I noticed I like to see a huge jump in numbers for dynamic power but I swear all the best sounding classics have a very tight regulation…the Xtant the JL slash the PPI art series those are my favorites on original W6 subs…

@cheeky50862 Жыл бұрын

Rockin the 202m bridged onto a 12" sealed sub.... Sounds epic

@Van1018s 2 жыл бұрын

I had one of these on 2 solobaric L7. First year of the square ones. Great amp.

@wal2 2 жыл бұрын

Awesome 👏

@scottstamm7022 2 жыл бұрын

7:38 two things I see here, before getting to the results, that I like; 1) the coil, 2) the fan and boxed cooling solution for the highest heat generating components.

@wal2 2 жыл бұрын

😬👍

@scottstamm7022 2 жыл бұрын

@@wal2 Lol, that emoji. So, the fan is a good and bad idea. If it fails, you might not know it until it's too late. Good, makes for a compact design, and less hefty chassis.

@the_dark_defender 2 жыл бұрын

Am I the only one that paused the video so I could try to read the articles and see the vintage ads when Dereck was flipping through the magazine? I used to love Car Audio & Electronics, I wish they were still around.

@wal2 2 жыл бұрын

I’m working on scanning and archiving the magazines and will put them online when I get a few years complete

@the_dark_defender 2 жыл бұрын

@@wal2 OMG!! You’re my hero! I’m really looking forward to that!!

@TruenorthmtGod Жыл бұрын

I sold mine not to long ago. Clean power big bump.

@joshholden8561 Жыл бұрын

These are some of the easiest amps to work on but they didn't and still don't come in for repairs very solid numbers I like everything about them.

@sonicgauge1 Жыл бұрын

I run this amp today with a 4180c , love em..

@wal2 Жыл бұрын

Awesome 👏

@sonicgauge1 Жыл бұрын

@@wal2 I've got a X1001 also, would you like to dyno it?

@getsum8931 2 жыл бұрын

Classics ftw 👍

@wal2 2 жыл бұрын

Yeah boi

@beemackin2316 2 жыл бұрын

Nice indeed

@wal2 Жыл бұрын

👌😬👍

@jeezy5270 2 жыл бұрын

Brantley and Martin also had Ultimate Audio they used to make UNREAL 🤬!!!

@wal2 2 жыл бұрын

🤷‍♂️

@ashadams4722 2 жыл бұрын

i had a 3300c back in the late 90's. loved it on the 2 jl 12's

@ashadams4722 2 жыл бұрын

thinking it was back in 96 when i got that system. 18 years old. lol

@wal2 2 жыл бұрын

Awesome 👏

@aracelyaguilar4844 Жыл бұрын

i owned 2 of these one smoked the first week. best sounding cleanest amp i ever heard but if you used them to push subs hard they didnt last long.

@brianpittman8069 2 жыл бұрын

Nice!😎👍

@D3M3NT3Dstrang3r 2 жыл бұрын

Buddy had one of these on 3 JL W6 12" when it came out. Very powerful amp at the time. We tried very low ohm connection by adding a box with a couple of 10" subs that we were putting in his GF's car to see what they sounded like added to the 12's. It didn't complain and put out more power as the 12's were moving more with the 10's hooked up than without. Not sure now that it was the smartest thing to do but at the time people were saying that they were like the old cheaters and would handle it. Don't know if that was ever true but we figured it wouldn't hurt to try.

@wal2 2 жыл бұрын

😬👍

@1rexrex 2 жыл бұрын

I met Jeff and his business partner and saw that Vette at a shop in Chandler, AZ in 96. It was very nice.

@wal2 2 жыл бұрын

Awesome 👏

@zigzagluck 2 ай бұрын

Had an Xtant 4180 back in the day. Really clean sounding and plenty of power, but having to remove the cover to make any adjustments was a bit of a pain. While it was purdy as heck, it was more complicated than I preferred. Unfortunately, my whole system was stolen. But with my Xtant 4ch gone, it gave me reason to reinstall my Zapco, which I still have to this day. Between the 2 brands, I ultimately prefer Zapco (the Z series).

@donjaun540 2 жыл бұрын

I wanted these amps at one time but went with other power. Nice looking amps.

@wal2 2 жыл бұрын

👌😬👍

@donjaun540 2 жыл бұрын

@@wal2 I was told they are the Cadillac of mtx. MTX made them??Hmmm

@kadenjohnson1072 2 жыл бұрын

I recently had the pleasure to repair an xtant 2140c. When I was first handed it I had never heard of xtant. Once I got it working I could immediately tell it was something special. I even tried to buy it off the guy who I fixed it for. He told me he killed it in the late 2000's running it at 1 ohm but it took it for over a year.

@wal2 2 жыл бұрын

👌😬👍

@timc2745 2 жыл бұрын

Do you still repair AMPS? Where do you live. I have a 1990s Soundstream 1000S needs repair and an new Zapco too. Thanks.

@bygboie 2 жыл бұрын

Back in the day always dreamt of owning one of those but the service never gave me enough time or money. Good to see I would've gotten my money's worth

@wal2 2 жыл бұрын

👌😬👍

@anthonysandoval965 Жыл бұрын

Is there a big difference between the 1000dx and the X1001 in power or are they still pretty close? And thanks for the dyno tutorial it's been a long time coming. Great job Big D!!

@edtexas5064 2 жыл бұрын

I had some Xtant 4 channel back in the day. 4180c. Had it running some Focal's in the kicks and a 15w4. It worked well for the show I did. I guess this has to of been 1886 maybe.

@anonymousmc7727 10 ай бұрын

I got one new in the box with the white sticker still covering the shine😊

@VisionSoundPDX Жыл бұрын

Shout out to Elite Audio… thank God someone else decided to broaden their horizons other than me and offer NOT JUST car audio

@ernestclark21 11 ай бұрын

Big D, U Da Man! Aue, do u remember the "SHERWOOD". amps from back in the day? One of my very first systems '89-'90, I had a dookie-brown '82 Riviera with the crushed-velvet pillow seats. I had two 4-channels and an X-Over. One was bridged to push a pair of Pyramid 15's and the other took care of some Phase Linear 4X6's in the front doors and good ol' 6X9's in the rear deck. Literally every piece of trim vibrated like rocks in a tin can.

@x86DualBooter Жыл бұрын

I owned this amplifier.

@wal2 Жыл бұрын

Awesome 👏

@linusfzj80 Жыл бұрын

I have an old 4 channel I never sold, glad for that - it’s cool just seeing it, prob should put it in a car & not just keep as closet decoration.

@NDColorado2023 2 жыл бұрын

Back in 1999, I managed a Audio/Performance/Automotive repair shop. Advanced Auto, Audio, and Electronics. Xtant was one of our lines along with Coustic, JVC, and MTX. Believe it or not, I sold WAY more Coustic than I did Xtant.

@wal2 2 жыл бұрын

I believe it!

@shonuff4377 2 жыл бұрын

I'm sure. Cost less. That's the same as Burger King saying I sold more dollar sandwiches than I did Whoppers today

@NDColorado2023 2 жыл бұрын

@@shonuff4377 actually back then Coustic made quality gear. I sold a ton of it because it was the best bang for the buck. Pun intended.

@shonuff4377 2 жыл бұрын

@@NDColorado2023 I never said anything negative at all about Coustic. All I said was it was cheaper.

@diawaprolite7967 Жыл бұрын

Coustic pro logics?

@gueroburban4989 2 жыл бұрын

My cousin had this amp in 2000 in a tahoe with 2 15 jl man that sounded good

@wal2 Жыл бұрын

😬👍

@kenhammond9645 Жыл бұрын

I have one of these sitting in my garage with 2 JL Audio 10w3s in a box that I have nothing to do anything with… currently running a single 13TW5 with a PDX-5. I have the module and base knob too.

@wijibo6772 2 жыл бұрын

I remember back in maybe 99, there was a guy running 6 of these. I think he was running Volcano subwoofers, but it has been a couple of days since then.

@wal2 Жыл бұрын

😬👍

@grominwithrob1339 Жыл бұрын

I remember that issue!!!!

@wal2 Жыл бұрын

👌😬👍

@the_dark_defender 2 жыл бұрын

I’ve been waiting on an Xtant dyno test since god’s cat was a kitten! Thank you!!!

@wal2 2 жыл бұрын

Yeah boi

@jdizzle3740 2 жыл бұрын

A buddy of mine Competed in the IASCA world championship running Xtant/Eclipse gear. Those Xtant amps were SQ greatness!!! Just be careful you don't get a runaway strand of wire on the amp....

@wal2 2 жыл бұрын

Yeah those terminals were WaY too close!

@martintaylor984 Жыл бұрын

Not cheap but beautiful!!!

@pedroveliz4131 2 жыл бұрын

Thanks big d wiz I always wanted to see an xtant amplifier on the dyno! I wonder obviously the designers are really intelligent people,so why the power inputs so close?And the fork style connectors do they come in heavy duty styles? God bless y’all!

@wal2 Жыл бұрын

The power inputs SUCK! I was told these went from design to manufacture VERY quickly so they likely skipped a few steps

@jordanmathews2408 Жыл бұрын

@@wal2 I mean those inputs were pretty par for the course back then. Until JL Audio, Kicker and Rockford started doing the recessed separated power inputs.

@csj9619 Жыл бұрын

I'm glad the trend of amps having modules, crossover cards and such didn't last. Was not a big fan of being sold add-ons that are required to make your brand new amp work. Another downside is this: try getting a different module to change the crossover filter frequency for that amp nowadays.

@stormyrain995 3 ай бұрын

Interesting fact. Mtx bought xtant. Closed it down a few years later. Used their filtering tech in the newer amps (x thunder and so on)

@spacepolice 2 жыл бұрын

Был у меня 4180х, один из лучших автомобильных усилителей по звуку

@jud-asinsmith-stansell2022 2 жыл бұрын

Awesome. I have a 4 ch NIB. Be nice if a guess speaker could be found for a bit of history

@wal2 Жыл бұрын

Thanks for the suggestion

@darrellhenderson1459 2 жыл бұрын

Was way more than I could afford,but they were nice to look at and wish I had one

@wal2 Жыл бұрын

Me as well

@FATHERSOFBASS 2 жыл бұрын

I had one of these amps but used and broken all that was broken was the rcas but I never got it fixed just lugged it around n threw it away at the end… I really loved the style of there subs too never had any

@volvo09 2 жыл бұрын

Yeah that looks like a very delicate RCA setup.

@FATHERSOFBASS 2 жыл бұрын

Wowwwww bro I just seen that the rcas are soldered directly to the board that’s why mine was broken off now I know why they broke off I threw away a beautiful peice of history I feel like shit now

@bennyblanco14 2 жыл бұрын

Xtant made somw amazing amps

@wal2 2 жыл бұрын

👌😬👍

@johnstarks5323 Жыл бұрын

I remember this brand of amplifiers, but never saw one in person.

@wal2 Жыл бұрын

Me too neither 😊

@ENDLESS85 2 жыл бұрын

I remember back in the day around 98, heard 4 vega stroker 18 in a clam shell do a 158. something. 4 huge us amps, it was the first big system i ever heard, got back in my extended cab s10 with 4 12s on 2 kenwood 1028's and was like what.

@wal2 2 жыл бұрын

👌😬👍