How to Replace Intake Gasket 05-16 Toyota RAV4

No video

How to Replace Intake Gasket 05-16 Toyota RAV4

Рет қаралды 29,719

1A Auto: Repair Tips & Secrets Only Mechanics Know

Күн бұрын

For More Info visit us at: 1aau.to/h/bUb/
In the video, 1A Auto shows how to remove and replace a worn or leaking intake gasket. The video is applicable to the 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, Toyota Rav4.
This process should be similar on the following vehicles:
2006 Toyota Rav4
2007 Toyota Rav4
2008 Toyota Rav4
2009 Toyota Rav4
2010 Toyota Rav4
2011 Toyota Rav4
2012 Toyota Rav4
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oyv/1AX...
• 10mm Wrench 1aau.to/ohf/1AX...
• 10mm Socket 1aau.to/ouv/1AX...
• 12mm Socket 1aau.to/ox9/1AX...
• 15mm Socket 1aau.to/ox9/1AX...
• Hose Pinch Clamp
• Plastic Fastener Remover 1aau.to/ox/1AXA...
• Hose Clamp Pliers 1aau.to/o8/1AXA...
• Needle nose pliers 1aau.to/odT/1AX...
• Needle nose pliers 1aau.to/odT/1AX...
• Ratchet 1aau.to/oAg/1AX...
• Socket Extensions 1aau.to/ox9/1AX...
• Torque Wrench 1aau.to/opG/1AX...
• Hose Clamp
• Pick 1aau.to/oe6/1AX...
Subscribe: / @1aauto
Check out our playlist:
Toyota RAV4 2005-2016 3rd Gen: • Toyota RAV4 2005-2016 ...
For More Info visit us at 1aau.to/h/bUb/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 20

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@konradhittner4668 2 жыл бұрын

You’ve convinced me that a PCV valve replacement on my wife’s ‘11 Highlander (2.7 liter) is not a DIY job.

@jonathansanchez10 2 жыл бұрын

Thank you so much! Great video! This is gonna guide me step by step when I’ll be replacing my PCV valve on my 2010 Toyota Camry 2AR-FE

@sasovalerio1 2 жыл бұрын

How’d it go for your PCV replacement? I was hoping to only loosen up the intake and get wiggle room for the valve replacement? Any help would be much appreciated.

@Fred-F4 Жыл бұрын

4:50 one of those is the PCV valve hose, in case you want to add a catch can

@mikeward2922 2 жыл бұрын

removing windshield wipers to replace an engine gasket. (nevermind the 14 bolts, etc. for removing the cowl, for goodness sake). Gotta love Toyota. Kind of like burying the fuel filter in the gas tank with no access panel from inside on my Rav4. $30 part, hundreds in labor for a fuel filter replacment due to literally dropping the gas tank. Gotta love Toyota. So, what's a common problem on the 07 RAV4? Intake gasket. In fact - there is a newly designed one since the original becomes a source of a vacuum leak with really not that many miles on the car. Want to be frustrated? Buy a late model rav4 and chase a P0171 code. Injectors, check. Gasket, check. PCV, check. Fuel filter and pump, check. MAF, check. O2 sensors, check. Throttle body, check. Gotta love Toyota. Great video by the way. Just frustrating working on this POS.

@jonathansanchez10 2 жыл бұрын

Thank you!! I found out that’s exactly what I have to do to replace my PCV valve on my 2010 Toyota Camry 2AR-FE

@gonzalez990 8 ай бұрын

why didnt you take the windshield wipers first ?

@Fred-F4 Жыл бұрын

Very informative!

@raulmaciel4031 Жыл бұрын

Good video 😮

@rdaleyj1 3 жыл бұрын

I waited to long to diagnose the P0420 code and now both front and rear main seals are leaking oil, soooooo I'm wondering if it would be best to pull the engine and do it all

@kabtexmechanic53 9 ай бұрын

I have the same issue for intake manifold that's what is showing me on my scanner

@rdaleyj1 3 жыл бұрын

Would this be similar to replacing the intake on the 2007 2.4 L Rav 4?

@1AAuto 3 жыл бұрын

+rdaleyj1 The video is applicable to the 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, Toyota Rav4.

@rdaleyj1 3 жыл бұрын

@@1AAuto great video sir. I see that you were able to get the intake manifold pulled away from the head a few inches so when it comes to gasket replacement I think I'll skip the dismantling of the fuel rail and the cowl and put the new gasket on without pulling it completely out if I can. Thnx for the vid.

@mikeward2922 2 жыл бұрын

@@rdaleyj1 were you successful in replacing that gasket without removing the cowl? I am shaking my head at having to remove the cowl for an engine gasket. The way they designed these cars, it's a built in money stream for Toyota mechanics, just considering the labor for what should be reasonable maintenance.

@HandyTim 2 жыл бұрын

I'm working on a 2010 Camry with the same engine and there is a visible oil leak on the driverside that's leaking through the intake. I'm sure it's not coming from the valve cover gasket. Where do you think it may be coming from?

@1AAuto 2 жыл бұрын

+Tim Whit We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c