√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@prodigyponies30833 жыл бұрын
1A Auto: Repair Tips & Secrets Only Mechanics Know The bolt you removed at 3:10 wont come off i already took off the nutt no issues but when trying to hit it with a hammer it goes absolutely nowhere and putting an impact wrench on it doesnt do anything
@williamharris40462 жыл бұрын
How much is the part.
@makeittrades5750 Жыл бұрын
you website needs some serious work. Unable to choose trim for a honda accord. Search bar does not find results cv axle, sidebar is horrible. Shopping elsewhere. Peace.
@johnlindsey64124 жыл бұрын
This video gave me the confidence to replace a broken cv axle. Great camera work and explained well. Thanks! Im 58 and remember when there was no youtube with helpfull videos like this! It makes it easy to do the work yourself and save big money!
@jeffcarpenter32413 жыл бұрын
Video super helpful. Was able to replace driver side axel myself in about an hour and save a ton of money. I think I could do the other side even faster since I did this one and watched the video. I thought this was going to be an all day job. Thanks so much for posting. I appreciate the pace and letting us know the sizes of the nuts and bolts, saved a bunch of time trying to figure out what size. Huge difference in the handling of the car, no more shaky steering wheel and no more clicking when I turn right. Steering feels more solid. 2005 Honda accord EX.
@1AAuto3 жыл бұрын
+Jeff Carpenter Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@Jojo-dn3sj2 жыл бұрын
This has been the best demonstration of anything I've seen on the www, so many thanks. I couldn't find a 32mm socket for the axle nut at home and I knew I bought a socket just for some job a few years ago. I found it and it's 36mm and luckily, it fits my 2007 Accord. My car failed Virginia inspection. The inspector wrote "rack and pinion boot broken" but it was the CV boot, left side. Rack and pinion look fine. I've had no steering or suspension failure on this car. I'm going to replace sway bars, lower ball joints, inner & outer tie rod ends, & all boots both sides because I have 110,000 miles and I think the right side boot is also leaking grease. That will make me confident I'll never ever need to replace any of these components again and it will be much easier during the axle replacement. Otherwise, I might need to pay for an alignment now and again if something failed in the future.
@KDNBLK4 жыл бұрын
You’re my hero! Great video! What I loved most is that from the beginning to the end, you were doing and explaining as you went! If this 30 min video were on a different channel, it would most likely be 5 minutes of work and 25 minutes of talking about crap Yours is amaZIN!!!! Love it dude!!!
@1AAuto4 жыл бұрын
+KB DN Thanks for checking us out! 1AAuto.com
@dgriffin60745 жыл бұрын
Nicely done. Gives me an appreciation of how much is involved in replacing the axle.
@1AAuto5 жыл бұрын
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Daryl Griffin
@fdog23044 жыл бұрын
Great video, one of the best I've seen here. Kind of glad I had somebody else do it the other day though, as painful as the cost was, replaced both left and right axles, 2003 Accord, 270K miles. Not quite so glad I clicked the link and saw how inexpensive the parts that were replaced could actually be. As they say, oh well. (It will make me think a lot more before telling them to just go ahead and do it the next time something "major" needs to get fixed.)
@llamasama44582 жыл бұрын
I really appreciate the good choice of camera angles and the music not being loud ralative to the commentary.
@noahschmartz23543 жыл бұрын
this guy is a joy to listen to and watch.
@1AAuto3 жыл бұрын
+Noah Schmartz Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@dacianazerinity20523 жыл бұрын
Only gotta be 2% smarter than what you're working with and you're obviously 150%, thanks for the wonderful explanation and walkthrough. This is gonna be a lot easier with your help. Thank you for this video.
@universalityofremodeling2 жыл бұрын
That's a lot of work to a change CV Axle. I guess I won't be getting an Accord! Great Vid..."One Love - Bob"
@TeddyPatrickS2 жыл бұрын
It's a lot more work on a lot of other cars. Accord's are easy relatively speaking. It's a lot of work to change a CV axle just in general lol
@jamespletcher75743 жыл бұрын
An excellent video. Thank you. Very professional, to the point, and no useless palaver.
@1AAuto3 жыл бұрын
+James Pletcher Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@alexkairis39272 жыл бұрын
Step one: have a lift Awwww crap. Step two: stop losing the 10mm sockets DAMNIT! Step three: Have an impact wrench - FINALLY! Something I can do.
@BennyB00per5 жыл бұрын
About to do this job on my 2004 honda accord thanks for such great detailed information!! This is why I buy from you guys!
@1AAuto5 жыл бұрын
+Benjamin Nicholls Thank you for your feedback!
@BennyB00per5 жыл бұрын
@@1AAuto Is this the same way done for a 2004 Honda Accord 4 cylinder lx? 2.4 liter? It looks like it is. I changed out the sway bar link stabilizer however now I know that this is the job that needs to be done.
@quixotic3175 жыл бұрын
@@BennyB00per yes. It is
@DoneWaiting Жыл бұрын
Never seize is my favorite thing in my chemical cabinet. I work in Nh and you learn the handle every fastener with kids gloves. Even lug nuts can get stuck and break occasionally.. It would be great when you get the cold weather package in a car it means they add never seize to every fastener.
@1AAuto Жыл бұрын
+Kristopher Libby Thanks for the tip!
@Youtubelacksfreespeach Жыл бұрын
Best video I have ever seen! Doing this tomorrow! It’s going to take me forever but this will really help! Subscribed
@unebonnevie4 жыл бұрын
Excellent camera angles and clear views!
@1AAuto4 жыл бұрын
+unebonnevie Thanks for the feedback!
@dannyr333 Жыл бұрын
Cv axle on the spindle end is essentially a massive swivel type part Wow I always known that but it’s just cool how it can still rotate on 2 axis
@jrlannum4 жыл бұрын
"I've got a swivel, I've got my air gun, you can use a ratchet. You do you boo boo" ,🤣🤣 lmfao great video.
@mics67 Жыл бұрын
I also would definitely recommend removing brake caliper to relieve stress on hose and it will make removing much easier.
@DavidKHill3 жыл бұрын
Professionally presented!! Good camera angles that facilitated an excellent How To!! Thanks!!
@jasontaliaferro36574 жыл бұрын
You can lift the control arm with a jack instead of lifting manually and using a screwdriver.
@awesometuscaloosa72033 жыл бұрын
Nice! Took less time than expected, now I have spare time for some KZfaq 👊😉
@oonojoe3 жыл бұрын
This is a good dude! Nice work.
@23ginger Жыл бұрын
I just did this on my car and I just removed the wishbone entirely instead of the sway bar link.gave More room and it’s easier than dealing with the link
@GetSwedenborg3 жыл бұрын
Fantastic How To video! Made the job look simple.
@1AAuto3 жыл бұрын
+GetSwedenborg Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
@nicholasstephey84752 жыл бұрын
Great video. Had it out and new one in 30 minutes
@billlackey8363 Жыл бұрын
Great video. I have an accord that first drive on cold morning feels like the road is bumpy. It smooths after a couple of miles . Wonder if that is CV going bad?
@iallison4014 жыл бұрын
Im going to do this this summer. I think im going to go ahead and take the shock fork off cause knowing my luck i'll rip the boot getting the new axle back on your way. Great great great video though!
@1AAuto4 жыл бұрын
+I Allison Thanks for checking us out! 1AAuto.com
@AdamJacksonn4 жыл бұрын
is anyone watching this bc they tried doing a fwd burnout and broke their halfshaft?
@svtbird96133 жыл бұрын
I punched it from a stop light
@johnriley87136 ай бұрын
11:01 That brake line is SCREAMING!!
@gotze17725 жыл бұрын
Excellent video.Thank you
@1AAuto5 жыл бұрын
+Goce Andrevski Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
@Stupid_you_so_stoopid_UHF3 жыл бұрын
Thanks for A1 .. * Note * for Acura TL Take the strut wishbone off. It takes a minute (trust me).
@tserevenad3 жыл бұрын
You guys have great videos, but I wish you would demonstrate the failed part.
@1AAuto3 жыл бұрын
+tserevenad Thanks for the feedback!
@dmcresins Жыл бұрын
Nice one, I was wondering what the dampner in the middle of the axle was for and why the new one didn't have it, instant panic!:)) 👍
@1AAuto Жыл бұрын
+dmcresins Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
@harveyadams545311 ай бұрын
If you really think Honda putting that damper on to limit NVH concerns had no merit.then you are mistaken. This is the reason why we do not deal with aftermarket parts for the most part.. I'm sure 1A Auto engineering department is superior to Honda....yea right.. again this is the reason why confident automotive technicians try to stay far away from aftermarket parts as possible and practical
@kevinc5917 Жыл бұрын
This video is fire!
@joshuabrouillette70613 жыл бұрын
I died @8:56 when he said you do you boo boo🤣
@1AAuto3 жыл бұрын
+Joshua Brouillette Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@santiagogaitan48843 жыл бұрын
Thanks for your knowledge
@1AAuto3 жыл бұрын
+Santiago Gaitan Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@rx7drifter8 Жыл бұрын
"Safety is first at 1a auto" removes bolt with 10mm deep chrome socket 1200ft impact gun
@Gera-f-212 жыл бұрын
Lol hit the nail on the head... I am replacing mine because of the dampener snapping
@ddartemio3 жыл бұрын
Thank you great video.
@jacobs87603 жыл бұрын
Thanks for the video. I noticed after replacing mine, that the boot is sometimes rubbing against the lower control arm. Now I have a pinhole size leak. Anyway 2 adjust this?
@1AAuto3 жыл бұрын
+Jacob S Thanks for watching! You should make sure that the vehicle has a proper alignment and the parts were reinstalled correctly. If the boot has a leak you will have to have it replaced.
@mckoylach16223 жыл бұрын
Thanks for your video. So is the axle nut for an 08 accord,also size 32 mil ? I need to do mine
@scottkiddx3 жыл бұрын
My 03 v6 was a 36MM ...
@justinandrews4368 Жыл бұрын
Any thoughts on what’s going on if when I removed the axle the transmission fluid all leaked out. Is it just a deal or does that probably mean my transmission is shot
@MoparGuy16253 жыл бұрын
This is the dude from TRQ
@MistahIDGAF3 жыл бұрын
If you don’t have an air chisel is it still easy to push the axle out of the wheel bearing like you did?
@mikeybarraclough82232 жыл бұрын
2:37 thats the lower part of your strut fork, the lower part of the strut is above the cv
@mikeybarraclough82232 жыл бұрын
also good to flip the castle nut before hammering it
@Only1JayMar5 жыл бұрын
I’m working on my 05 accord & the bolt connected to my control arm is not budging. I used a hammer but I’m only ruining the nut that was holding it in place. Any ideas?
@rustyshakleford3414 жыл бұрын
Melt it off
@EnvyDesignGroup2 жыл бұрын
Amazing content. Thanks for sharing.
@daviddurango8403 жыл бұрын
yeahh.....it's gonna be the shop for me.
@1AAuto3 жыл бұрын
+David Durango Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@mikenike71773 жыл бұрын
Muchas gracias 😊 !!!
@RobertConnollyOATS4 ай бұрын
Why the difference between the two cv axels
@ajauntemason3868 Жыл бұрын
Do the 2.0 and 2.4 use same axle??
@actionjackson1296133 жыл бұрын
Hey what about the balance mechanism on the oem and not on the replacement parts i always struggle finding an axle that wont vibrate like the oem one
@turbinesnake5 жыл бұрын
Try it on the garage floor on your back and nothing comes out that easy 1 you need a torch and good tools and a strong back..
@AndrewSilvaVlogs4 жыл бұрын
in the middle of doing this job in the garage now, everything's coming apart like butter for me. Just need the right tools.
@fflynnful4 жыл бұрын
I just did both sides on the floor with jackstands, not a problem.
@zigner4 жыл бұрын
Experiences on how difficult it is vary depending on what climate you live in (winter salt).
@lazymochagirly Жыл бұрын
U r in a shop, use a stand jack to jack up the control arm up to line up the wishbone hole man...
@sa1nt_john.v12 жыл бұрын
My steering wheel shakes a little bit after take off and shakes more at around 60-70 on the freeway. Could that be my axels? I got an 05 Acura tl
@LuisLopez-kq4ez3 жыл бұрын
Is this the same procedure if the car has a manual transmition?
@JereNupponen2 жыл бұрын
Is the oil coming out when you take the driver saft out??
@hitman61913 жыл бұрын
You do you Boobo lolololol Great Video. You saved me some money
@user-be9ii9ut4t2 жыл бұрын
36mm axle nut socket
@NamTran-wl5kk Жыл бұрын
How to change the Honda 99 Honda passport Axly
@uhmeizuhngralphf05492 жыл бұрын
Without a rubber damper in the middle that thing will vibrate
@fernandogalvan6266 ай бұрын
My anxiety went crazy with guy explaining how to do this there has to be some else that does have ADHD to explore this
@gerardorivero16114 ай бұрын
Que número de parte coloco para comprarlo
@Marine-io2tn2 жыл бұрын
Why no tools list for this video?
@RitmoAntiyanoDiferente14 жыл бұрын
hi a question about the axle nut is it 32mm or 36 mm because in the usa the honda accord i have in europe is called acura tsx,but i see on the tsx the nut is 36mm
@kepcoate90814 жыл бұрын
It is 36mm on my Honda Accord 2007 SE V6.
@justinshannon58192 жыл бұрын
How do u get cv axke boot removed from transmission
@jeffpro84 жыл бұрын
Looks complicated, its' no wonder why it costs so much to repair.
@marcgillette82575 ай бұрын
My 2007 is very different than this model
@questorhh3 жыл бұрын
Hi 1A Auto, does the snap ring on the transmission end of the CV axle ever come loose and get stuck inside the differential? If it does get stuck inside the transmission then when what can be done to remove it? I have this fear it might happen if I try to pop the axle out of the transmission.
@1AAuto3 жыл бұрын
+questorhh Thanks for watching! That can sometimes happen and you will need to remove it before it causes damage to the transmission.
@questorhh3 жыл бұрын
@@1AAuto Is it difficult to remove?
@eds.89004 жыл бұрын
What is the part number . I changed mine with AutoZone and two Napa axles and had the axle wobble.
@1AAuto4 жыл бұрын
+Ed Seda What is the year, make and model? We can then check our inventory. Thanks for checking us out!
@BassheadGTP4 жыл бұрын
Tell me A1 now what would you do if that wishbone bolt is seized in the bushing in the lower control arm???
@robertlopez6163 жыл бұрын
Hit it harder
@miscellaneous-gaming289 Жыл бұрын
So what did you do? I’m stuck at this point too
@mr.r59 Жыл бұрын
Where's the power tools
@juanmoreno51873 жыл бұрын
Do you know why my cv axle not wanting to fit all the way in the spindle. It just grinds it
@1AAuto3 жыл бұрын
+Juan Moreno We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@brian67233 жыл бұрын
Wow let's not take note of the carrier bearing or whatever that is in the middle of the axle
@CesarHernandez-lc3lt2 жыл бұрын
Dont kno what tools he uses
@rizwanali90504 жыл бұрын
Where have you country 1A Auto parts
@Thors_Garage2 жыл бұрын
This guy is rough on the parts. And he's using a chrome socket on an impact. Not to mention dropping a tire on the ground like that to start can actually do damage to the belts.
@brian67233 жыл бұрын
There's got to be some kind of clip holding the axle into my transmission because I can't get it out for the life of me
@HernanHH952 жыл бұрын
18:20 That thing was bending,
@bortsimpson45363 жыл бұрын
I'm surprised they edited out all of the cursing. If I did that job every other word would be inappropriate.
@cutiewithoutacare4 жыл бұрын
Do you have a shop here in Los Angeles?
@1AAuto4 жыл бұрын
+Cutie Without A Care We are an online retailer so we do not have any physical shops. Visit us at www.1aauto.com
@mitchelllankford4683 жыл бұрын
Clicking when making turn
@1AAuto3 жыл бұрын
+Mitchell Lankford We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@greenfukn2 жыл бұрын
anyone else full throttle with a half inch air tool and a 32 lol
@RedMohawk953 жыл бұрын
haha he didnt say you do you boo boo lol
@reddoggy13 жыл бұрын
Mine rotted in that very spot
@ben50733 жыл бұрын
NIIIICE... Subscribe!
@ricky2371ify4 жыл бұрын
Can a 03 Honda axle fix 03acura tl driver side ?
@1AAuto4 жыл бұрын
+Lord Vadar1 If you have a 3.0 2002 Accord it will fit.
@ricky2371ify4 жыл бұрын
🙏
@rastomasstanford77082 жыл бұрын
You do you buu buu
@yoisell1543 жыл бұрын
Hi, It would be great if they could put subtitles in Spanish. I think they would gain many more likes on the page and it would grow more. Also that they could export their parts to Mexico greetings from Mexico greetings.
@jasonmcanulty48132 жыл бұрын
This is the US, dude. We speak English. I would be watching a different channel if there were Spanish subtitles during the video.
@fagittarius555 Жыл бұрын
Awful camera at 14:00
@andydebruijn3454 жыл бұрын
Can someone give me a list of all the tools I will need
@Wadagamebinmisin4 жыл бұрын
Andy de Bruijn he has a list in the description🧐🤔🤦🏻♂️🤨
@asimovsky67282 жыл бұрын
mkay?
@-idahos_unknown-35732 жыл бұрын
will this require an Alignment after installation
@fernandogalvan6266 ай бұрын
My anxiety went crazy with guy explaining how to do this there has to be some else that does have ADHD to explore this