√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

What a wonderful tutorial! My son and I will be using this as a guide to help replace his grandma’s rotors and pads. I’m very impressed with this technician and her step by step approach.

I've been working on cars for 50 years and you taught me something I did not know. Thank you.

Thank you for a superb refresher, only wish I had a lift

Great video. So detailed. I always watch a video that way I know the tools I’m going to need. Definitely didn’t know about the piston caliber bleeder. Thanks!

Same year and car I just ordered parts for from you. Same issue as well. Very helpful. Didn't know about the abs bleeder stuff. Always watch the entire video. It helps thank you

Excellent video, and the most informative one I've seen for the Equinox brake and rotor replacement. Everything including torques was stated clearly. I've done a couple brake replacements in the past. Always good to review and learn something new.

Great video. Very helpful that you explained the tools you used so when I started the job I had everything on hand. I bought my parts from ya'll. Videos are a great customer service.

Absolutely fantastic, your attention to detail was extraordinary, best how to video I’ve seen on KZfaq. Thank you so very much.

Excellent video! You should do all 1A Auto Parts videos. Very well explained and not rushed!

Great video and very timely. I’m getting ready to do a brake job on my Equinox. Thanks for the video and specifically the needed torques. Thank you

This was like watching my best friend work on a car! Thank you so much. I was not only informed but I also know what to look for and not get scammed!

Just completed this replacement this weekend. No experience. With this video it was a breeze. Ordered the kit from 1a Auto and everything fit/works great. Appreciate the video/information.

You are great Ms Lady. You laid this issue and the fix out superbly. Appreciate it. Out of work atm so need to save everywhere I can.

thank you..I just helped a friend because you showed me....saved the young lady alot of money..thank you

what a really precise and to the point video. She did a wonderful job. thank you

Hey I just wanna say thank you!!. Just finished changing my dad’s front brakes , and the only downside was I broke the screw that holds the driver’s side rotor, so hopefully nothing bad happens lol. Other than that I just followed step by step and made it easy to install. The old man was really happy after the dealership asked him for $500 to do the job.

Love that the video was made with a woman performing the brake and rotor service! Wish we had more women in the field! Great job, ma’am!

Great video, awesome job showing each step. Informative mechanic there 👑

Nice tutorial, has been a while since my brakes were done. Doing them today!

Thank for making these videos I watch them when ever I need something fixed that I can do at home

Thank You. Followed to a T and came out great.

Merci beaucoup je change mes plaquettes demain, j'apprécie vraiment, Merci Très claire la vidéo expliqué correctement ,la mécanicienne explique clairement

Very thorough! Ty so much! Clear concise and very informative

Very good job. Nice and clean. Thank you

I want to say thank you! Well done

Great video. First time I've seen a women do a brake job on a car. I do my own but wish I had a lift.(that Jack can be a pain in the but)I love doing as much work myself as I can on my own vehicle.

Yes! Put threadlocker on the caliper mounting bolts. I had them come loose on a new f150.

I just did the pads and rotors on my 2010 equinox using this video as a guide. Everything went well. Thanks for the great tutorial!

Excellent video thank you!

A garage with a lift like that is definitely on my bucket list.

You don’t need to touch the bleeder …

Do you really need to open the bleeder !?? I usually just open the cap on reservoir under the hood abs just carefully compress the piston and install pads .

Bob Brady Nice thorough job. thx

So I noticed you said the caliper pin with the rubber on it usually always goes on top. However I noticed in the video that the it it was on the bottom of the caliper. Can you clarify? I'm trying to figure out which one goes where. Thank you

My daughter wouldn't even want to put the license plate on her car. You go girl.

Great tutorial

Hey, What is the number code for the color red on the rims of the 2019 Chevy equinox redline edition. I’m replacing my calibers and I wanted to paint them red to match with the trim

This video made me realize I can not do this by myself lol thank you!

Can opening the brake reservoir cap for releasing the pressure work as same as opening the bleeder screw instead????

What size for the break bleeder wrench into 06 equinox

Very well put together vdo.just wear a dust mask from the brake dust and I couldn't see your ears to know if you had on earplugs from banging that rotor....😊

If my breaker bar is not strong enough, what power tool can I used to take off the 18mm bolts on the brakes brackets?

This lady is pretty strong i would not want to mess with her. Great video thanks for sharing.

gracias por todos sus detalles 👍

Except for checking rotor runout with a dial indicator, and brake membrane on the back of the pads to prevent rattling, this was a thorough job.

Love you guys and gals over at a1!!!

Great Video thank you

I love Sue!!!! I want to learn from her!

Awesome video. It helped me a great deal. But please tell me the video of her torquing the bracket bolts was for illustration purposes. Unless she's stronger than the Hulk, that looked more like 30 ft·lbf than 140 ft·lbf!

Learned a lot with this video, thanks ;-)

Do your pads not come with new retaining clips? All mine do.

Where did you get the ratcheting breaker bar

Great video / good job

What happened to the shim on the back of the inner pad?🤔

C- clamp and an old brake pad is the best way to push a piston back in. Vise grips don't apply even pressure on the piston and is a good way to break or damage it

Excellent

Can a person pinch off the brake line to avoid all the messy leaking?

Thanks for the info. I was successful in doing everything you mentioned. However, when I started my car, i got three warnings. Stabilitrak, brakes, and service warning. Any idea what I should do now? It drives fine.

THANK YOU

Awesome thanks...

I have never had the luxury of having a lift as a DIY’er, nor KZfaq to show me how to do the job. I only had a High School Vo-Tech Class, where I thought at one time that I had only learned 1 thing in the 2 year program, which was “Not to be an Auto Mechanic”! I was wrong after saving $1,000’s over time. Ok, I love to see a Female in the business, which I believe brings an empathy towards the customer which is invaluable, after it took me 20 years to find an honest Auto Mechanic. She is correct about the Anti-Lock brake damage, as it took 2 of my cars to figure that one out. Also, she has the fluid down perfectly, as I have never seen the nice clean yellow fluid as described, but could never seem to do a good brake flush either, without getting air in the lines which is a big no-no. So, by now you have guessed that all my vehicles must have been older cars, and you would be correct, except a New Plymouth Voyager for my Wife, while she had our most precious cargo in our Children. That 1994 Voyager was terrible with the Breaks and definitely had inner faults not of my doing, because I always bought the high end brake products. A week before a long trip, I did the 1st Front Break job due to shaky steering upon stopping, and found the fluid Brown. I broke off both Caliper bolts while trying to use a Torque Wrench to properly tighten them (though my torque wrench could have been bad) and because I couldn’t get the bolts anywhere else, I had to pay $12 each for the bolts! Lightbulb in my head, are New cars really worth it? My one suggestion (Tip for older car cylinder retraction) that our Female Mechanic is no doing is to use the C- Clamp on a flat piece of solid wood to make sure that the Caliper Cylinder retracts evenly! I’ve learned this the hard way, as she said that the brown oil corrodes the internal metal and rubber, which if working on older cars will give you bad results at times. Another Tech-Tip, if replacing your Calipers because one of the 2 front breaks locked up! This is more then likely due to a bad flexible house connection! The power assisted breaks will push the fluid through the tubing under pressure, but when they are to retract normally just a fraction of an inch, but won’t, is typically due to an inside collapse of the flexible tubing that you will not see from the outside of the tubing and creates a type of Check Valve. I cut the line on each end until I was at the middle where the house clamp is & sure enough, the house was collapsed internally, without any change to the look of the outer side of the tubing. That was by far my toughest mechanical conundrum I came across. Take it from a very tough “Lessons Learned”, that you could replace your Flexible Break Tubing every 100,000 miles or less often if you put a ton of miles on your car from highway driving. Hope this helps someone out there.

With the bleeder screw open while compressing the piston, does the cap need to be off of the master too?

Okay so the metal tin pieces that are on the original calipers, do those not get transferred to new pads? I did that with mine but I have a noise that I can’t figure out. It is an intermittent squeak/grind that is pulsating and only at low speeds and only with light braking. I have replaced the front pads, hardware, and rotors. The bearings are good and do not have any play and do not make noise. The only thing I can think of is the tin piece. I use the CRC disc brake quiet and it goes away for a little while then comes back. Bad pads?

What size wrench did you used for the ABS bleeder screw?

Do u not have to open the master cylinder when pushing piston back? Not sure bc I was taught that way. Is just opening the bleeder screw ok?

5:45 I legit cannot get the mounting screw holding the rotor in and I’ve close to stripped it

You don't add grease to back of inner pad?

Any differences for a 2018 Equinox?

This is my Dream WOMAN.

Is this the same for a 2019 Equinox

Merci

Don’t leak out the brake fluid. You add air in the lines. I have to do an entire brake bleed after following this video. Everything else is good.

What is the measurement on the brake bleeding nut

Wher do they get all these people diferent people all the time

Dont forget to paint your calipers for extra horsepower

So, what do you do when the torx screw is stripped? How do I remove this thing to get rotors off? Why would GM put a torx screw on the rotor to hub? So dumb

She looks tuff

More cow bell 😝☺😜

Ur not supposed to use grease on the caliper pins ur supposed to use silicone putty or paste and u Never!! Put it on the end of the pin or just spread it inside the hole!! Plus u were saying to check the boot for damage because water can get in and u can easily see it has water damage drain in and u didn't even clean inside holes!!

140 ft/lbs on those caliper mounting bolts and you still need to locktite them also? WTH GM?

Thanks for telling us just why you add grease to parts. Anti rust. I now see why you use gloves. Dirt under my fingernails etc.

Interesting to see that she let the caliper hanging/dangling on brake line during compressing the piston back which 98% of the techs dont recommend..

WOW never once herd of it or seen anyone loosen the bleeder when compressing the caliper on an ABS car, interesting

ok.....

This was painful to watch