2006-2015 Gen2 Yamaha FZ1 Gear Indicator Install (Fits other Yamaha's and my video makes it simple!)

  Рет қаралды 15,698

Shawn Martin

Shawn Martin

2 жыл бұрын

After driving stick shift (manual transmission) vehicles for so long I noticed that a motorcycle had no indication of what gear you're in. The top of every stick shift handle is an imprinted stamp with the gears based on orientation and location. On a motorcycle you just learn that from the Nuetral position, 1st is down, and the rest go up from 2-5 gears (or 6 like the FZ1) unless you switch it upside down for racing.
You get used to it over time, but I'd always wondered what it would take to set up a gear indictator on my FZ1. After owning this bike for 7 years I finally got around to it! After much research and deliberation, I came to rest on this brand for 2 main reasons: 1. For ease of install in that it includes a factory Yamaha style wiring connector to slip between the OEM diagnostics wiring, so there are only 2 wires that need to be spliced in. And 2. The price point for this kit is well within range for anyone to be able to purchase it.
There are 3 colors to choose from, Red, Green, or Blue. The blue and green both had negative reviews because they were hard to see, so I chose red. The overall reviews for this item were good to great. The reviews that gave less than 4 stars seemed to be because of installation failure or wrong part purchased which is the buyers issue not the seller IMO.
It will take you longer than a few minutes to install because you have to take both left and right half cowl side covers off (the black vented looking pieces), and the plastic tank cowl on the front (mine is white but the color will match your bike). Last you can remove the 2 side bolts on the tank and lift the tank and insert a prop rod of some kind in the specially made divot in the top of the air box against the inside edge of the tank to hold it up.
Now that the tank is propper up lets get to wiring! Disconnect the factory 3-wire white connectors and insert the ATFWEL 3-wire white connectors into the plugs you just unplugged on the bike. After that find the wires for the black connector that's located closer to the front of the bike that lead to the Crankshaft Position Sensor, and splice in the black wire with the green stripe from ATFWEL i to the gray wire(this is not clear in the instruction BTW), then find the brown connector (for the rear brake light switch if you need to follow the wire up from there) near to the right side of the cavity under the tank and find the brown wire and splice the black wire with the green stripe from ATFWEL into the brown wire or the corresponding black wire on the other side of the connector as I did in the video.
That's it for the install now you need to button the bike all back up after you've picked which location you want the gear indictator to sit, it can be flush mounted using the double sided foam tape anywhere on the dash, or you can use the round clamp holder that mounts to the bar that came in the kit like I show in the video. Last steps are to follow the directions to set up the gear indictator based on the number of gears you have on your bike. It's not rocket science and I've got full detail near to the end of the video so go watch it for yourself and see how to get it ready to ride!
I recommend this product!
ATFWEL Amazon Gear Indicator $49.99 for Yamaha:
www.amazon.com/gp/aw/d/B0917P...
Other models this kit works with:
YZF-R1(1998-2008)
YZF-R6(1998-2016)
Fzh150/Fzn150(2015-2016)
Xt660 (2004-2016)
Fz400(1997-2002)
Xv1600A wild star(1999-2005)
Fz6(non-abs)(1998-2012)
Fzs600 Fazer(1998-2003)
Fz-16 / FZ-S(2008-2015)
Wr250r / x (2008-2016)
Fz1(2001-2016)
Xvs950A Midnight Star(2009-2016)
Fz8(non-abs)(2010-2015)
Bolt(non-abs)(2013-2016)
Road Star(1999-2014)
Fir1300(abs) (2003-2005)
Royal Star(all variants)(1996-2013)
Wr450r/x(2008)
Xjr400(2002-2007)
Fzs1000 Fazer (2001-2015)
Xjr1300(2004-2016)
Fjr1300(non-abs)(2001-2005)
Mt01(2005-2012)
Xvs1300A Midnight star(2007-2015)
YZF-R6s(2006-2009)
Warrior (2002-2012)
TDM900(non-abs) (2002-2013)
Stryker(2011-2016)
V-Star(950cc and above)(all)
MT-03(non-abs)
Raider Roadliner (2006-2016)
Stratoliner
Xv1900a Midnight Star(2006-2015)
Dyag Star
Xvs1100 Drag Star (1999-2006)
Xj6(non-abs)
Diversion(non-abs)
Fz6r (2009-2016)
TDM900(abs)
Bt1100 Bull dog (2002-2006)

Пікірлер: 34
@paulcolberg6388
@paulcolberg6388 7 күн бұрын
I just installed the kit on my 2015 FZ1. your video helped a ton with the install and the set-up. thanks a bunch!
@ShawnMartinNCBIRDMAN
@ShawnMartinNCBIRDMAN 7 күн бұрын
@paulcolberg6388 heck yeah! It's nice to have. Would be great if they just came stock!
@kyebaybeach
@kyebaybeach Жыл бұрын
Shawn, this was installed today with ease thanks to your video. Thanks again for putting out such great content! Love the FZ1 - just bought it a month ago and it has become an obsession!!
@ShawnMartinNCBIRDMAN
@ShawnMartinNCBIRDMAN Жыл бұрын
@Bruce Crawford thank you for the kind reply I do try to make them useful I figure someone may need it. Check out my full FZ1 Mods playlist if you need any other reasons to get a divorce!
@kyebaybeach
@kyebaybeach Жыл бұрын
@@ShawnMartinNCBIRDMAN Thanks man - I'm on it right now!
@ShawnMartinNCBIRDMAN
@ShawnMartinNCBIRDMAN Жыл бұрын
@@kyebaybeach if you have any questions I reply to all comments on here. I'm also admin of 2 FZ1 groups "FZ1 Forum 998cc" and "YAMAHA FZ1" if you're not already there come check them out.
@sekaf4125
@sekaf4125 2 ай бұрын
I have a 2001 FZ1. I hope this will work for it. Thank you for the post
@ShawnMartinNCBIRDMAN
@ShawnMartinNCBIRDMAN 2 ай бұрын
@sekaf4125 I haven't looked in so long I'm not sure it is a direct fit for the gen 1 FZ1...
@ericdieleman5409
@ericdieleman5409 2 жыл бұрын
Thanks for explaning, its was very easy to do, thanks again.
@ShawnMartinNCBIRDMAN
@ShawnMartinNCBIRDMAN 2 жыл бұрын
@eric dieleman awesome, glad to help!
@spikeboi55
@spikeboi55 Жыл бұрын
Thanks. This was helpful
@Teeon2wheelz
@Teeon2wheelz 3 ай бұрын
Want to see somone wire the gear indicator into universal speedometer with gearing wires
@vicpnut1
@vicpnut1 Жыл бұрын
Not knowing anything about “issue with a kink in fuel line…” till you said ….I did while watching think it looked like a Kink was starting to form and maybe should put some sort of stiff outer wrap to keep from getting worse….
@agronsadiku9901
@agronsadiku9901 2 жыл бұрын
hello.. is there a chance to mount it on the super tenere 750
@ModernJargonFailure
@ModernJargonFailure 8 ай бұрын
How do you take tank off
@agronsadiku9901
@agronsadiku9901 2 жыл бұрын
hello.. is there a chance to mount it on the YAMAHA super tenere 750 1990 year
@ShawnMartinNCBIRDMAN
@ShawnMartinNCBIRDMAN Жыл бұрын
@Agron Sadiku I don't think so. You could look at the part description on the website and see what it says it fits though.
@BreakneckTrent
@BreakneckTrent 2 жыл бұрын
I just received my kit for a 2008.. It only has 3 wires, a plug and no quick tap connectors. Apparently 2008 FZ1 doesn't have something the 2012 has? 🤔
@ShawnMartinNCBIRDMAN
@ShawnMartinNCBIRDMAN 2 жыл бұрын
@Breakneck Trent since this is not ordered for a specific year it should be identical to my kit. There should be a black/green stripe wire and a black/red stripe wire and the white plug connectors are clipped into each other and need to be unplugged from each other. It's a 3 prong male and female connector stuck together. There should also be 2 red quick connectors like I showed in the video. If you don't have the quick connectors you may not have been given a full kit, but your kit and mine should be identical. If you follow my video it will show you all the parts and where they go. Sorry if something is missing Ibwould contact Amazon customer service asap.
@BreakneckTrent
@BreakneckTrent 2 жыл бұрын
@@ShawnMartinNCBIRDMAN Update: I accidentally ordered a Kawasaki indicator 🤦‍♂️
@ShawnMartinNCBIRDMAN
@ShawnMartinNCBIRDMAN 2 жыл бұрын
@@BreakneckTrent it's all good glad you figured it out before splicing wires or trying to make it work! Once you've got the correct part just come back through my video and then it should make a LOT more sense! Take it easy bro.
@BreakneckTrent
@BreakneckTrent 2 жыл бұрын
@@ShawnMartinNCBIRDMAN got the correct one and installed it.. gonna program it tomorrow.. thanks for the info 👍
@ShawnMartinNCBIRDMAN
@ShawnMartinNCBIRDMAN 2 жыл бұрын
@@BreakneckTrent heck yeah! Programming is a cinch if you read the notes ahead and not as you're trying to do it cause it times out! Rode again today and watched it work and it works great.
@hattster1818
@hattster1818 9 ай бұрын
The extra screen bit is a screen dimmer, if its too bright you stick it over the display to dull it a touch 😉
@ShawnMartinNCBIRDMAN
@ShawnMartinNCBIRDMAN 9 ай бұрын
@hattster1818 that's good to know!
@BreakneckTrent
@BreakneckTrent 2 жыл бұрын
Would like to see how accurately the gear indicator works when downshifting multiple gears.
@ShawnMartinNCBIRDMAN
@ShawnMartinNCBIRDMAN 2 жыл бұрын
@Breakneck Trent, it can't determine what gear you are in say going from 5th then you pull in the clutch and downshift, the numbers won't go down as you downshift because it doesn't know what location it's in until you go into gear. If I am in 5th and pull the clutch in and shift down to 2nd for instance, the gear Iindictator will not show me the gear until I release the clutch into 2nd, then it pops right up with a "2". I tried to get a video tutorial together yesterday on a quick ride but my microphone didn't work and I didn't get any of the information in. This info should help, correct?
@MinnesotaOutdoorAdventures
@MinnesotaOutdoorAdventures Жыл бұрын
@@ShawnMartinNCBIRDMAN if you powershift aka dont use the clutch will it still read gear?
@ShawnMartinNCBIRDMAN
@ShawnMartinNCBIRDMAN Жыл бұрын
@@MinnesotaOutdoorAdventures once it's in gear it will read it, the indicator doesn't change based on a clutch shift.
@MinnesotaOutdoorAdventures
@MinnesotaOutdoorAdventures Жыл бұрын
@@ShawnMartinNCBIRDMAN so the second you pop it in gear without clutch the shift will register?
@ShawnMartinNCBIRDMAN
@ShawnMartinNCBIRDMAN Жыл бұрын
@@MinnesotaOutdoorAdventures I've tried different methods to trip the gear indicator and make it seem to not work properly. The only time I remember is maybe it doesn't register the gear if you pull the clutch in and leave the clutch in while the bike is changing rpm like gping up an i cline and the rpm's are dropping. I can't remember. I'll have to play with it some more. Honestly, I'm not really looking at it all the time, it's in a great spot to see it visually on the bar, but I haven't had a lot of miles since I installed it. I didn't install it because I don't know what gear I'm in, but just added it for those times when I'm between gears in a roll and maybe let the idle drop below the gear I'm in and maybe need to double shift down to get the rpm where I want it for the next move. A quick peek at the GI, shift and go. I really didn't want it to be a distraction or to become dependent on it in some way. Since I've had this bike for 8 years before installed the GI I'm already shifting based on listening and feel, not looking at an indicator. But it was a fun install and it's cool looking down and seeing which gear I'm in in case I kind of spaced out looking at the scenery. Lol.
A Fazer in My Life - Episode 11 - GEAR INDICATOR INSTALL
18:42
Piggy Power
Рет қаралды 25 М.
I Can't Believe We Did This...
00:38
Stokes Twins
Рет қаралды 90 МЛН
I wish I could change THIS fast! 🤣
00:33
America's Got Talent
Рет қаралды 123 МЛН
A clash of kindness and indifference #shorts
00:17
Fabiosa Best Lifehacks
Рет қаралды 33 МЛН
Nutella bro sis family Challenge 😋
00:31
Mr. Clabik
Рет қаралды 12 МЛН
Yamaha FZ1 (2006-2015) How To- Clutch Removal| Part 2 - Can We Fix It?
18:29
R1 2008 Gear indicator DIY Installation
10:56
alexk_215
Рет қаралды 2,5 М.
ZROBILEM TO / WYŚWIETLACZ BIEGÓW - YAMAHA FAZER 600 S2
19:10
Motocyklem
Рет қаралды 21 М.
Motorcycle Riders: You're Using the Wrong RPM
5:37
FortNine
Рет қаралды 2,3 МЛН
gear indicator installation splendor
10:15
your host amit
Рет қаралды 422 М.
Yamaha FZ1 Cambiando Bujías NGK Cr9ek por Cr9eix iridium
13:20
Luis Alberto
Рет қаралды 65 М.
I Can't Believe We Did This...
00:38
Stokes Twins
Рет қаралды 90 МЛН