2006 Dodge Ram 2500 5.9L Cummins Replace Fuel Injectors, Rail, and Lines. Plus Adjust Valve Lash

Рет қаралды 10,573

7 ай бұрын

2006 Dodge Ram 2500 5.9L Cummins Diesel. Replace the fuel injectors, fuel rail, and fuel lines. Have some videos of testing before and after. Ordered from S&S diesel and BD diesel. part numbers below. #cummins #dodge #diesel #injector

Пікірлер: 35

@briansnyder1276 4 ай бұрын

Great video, very detailed thank you

@treyhaberman 4 ай бұрын

Thanks man, appreciate it

@jeffreypinder9398 4 ай бұрын

Great and informative video. Word to the wise, using a "crows-foot", the opening has to be 90 degrees from the torque wrench for the proper torque. Straight on the torque is actually higher. Side note: If the fuel lines are stainless, they are more forgiving and can be tightened a bit extra for positive sealing.

@treyhaberman 4 ай бұрын

Yes sir I figured it would be a little less with the crows foot. The online calculator would call for 5 to 15 lbs difference, but everytime you reset the the ratchet it applies difference force. I just tried to keep them as equal as possible and watch for leaks.

@jeffreypinder9398 4 ай бұрын

@@treyhaberman Well done!

@ginahampton2129 7 ай бұрын

Awesome!!

@treyhaberman 7 ай бұрын

Thanks!

@patrickmolloy9828 4 ай бұрын

Awesome thanks

@treyhaberman 4 ай бұрын

Welcome bud

@matt1560 7 ай бұрын

Sorry just read the comments and see you bought some good video

@treyhaberman 7 ай бұрын

@dougtaylor5533 6 ай бұрын

Great video / walk through. I am curious, you cleaned the valve cover, but why didn't you clean the lower portion as well (only did injector holes)? (note, I don't have any experience doing this, so honest question) I suspect it is difficult to do (or high risk of making the situation worse). Thanks in advance, I have saved and will watch before I attempt.

@treyhaberman 6 ай бұрын

I didn't want to risk contaminating the engine, since I wasn't removing the head. That's why I just spot cleaned what I was working on.

@wildcard2668 7 ай бұрын

Which company is better to buy the fuel injectors from S&S or BD Diesel . Good Video learned alot

@treyhaberman 7 ай бұрын

This was my first time buying injectors, but I can say S&S was more personable to deal with than exergy. I knew that the previous owner installed Exergy injectors, but when I contacted them, they weren't any help. S&S not only walked me through the testing process to make sure my issue was the injectors, but took the price of testing out of the cost of the injectors. I just choose my brands based off of 5.9l cummins forum suggestions and I wasn't disappointed.

@TheOne-ts6lf 5 ай бұрын

Nice video, great detail what manual do you have and where did you get it?

@treyhaberman 5 ай бұрын

It's a Haynes manual from autozone

@TheOne-ts6lf 5 ай бұрын

@treyhaberman thank you sir.

@treyhaberman 5 ай бұрын

@@TheOne-ts6lf welcome

@ryanclarke2161 7 ай бұрын

How do you make low sulphur diesel?

@treyhaberman 7 ай бұрын

I work in a HDS (hydrodesulfurization) unit at a refinery.

@Mike-vu9xf 3 ай бұрын

Trey, what would an owner expect to pay for a job like this? Parts and labor.

@treyhaberman 3 ай бұрын

Not sure how much buddy. I wanna say probably around 4k

@kurt8986 3 ай бұрын

what's ur turbo setup I'm only at 38 psi with a taterbilt 63.67 and 100hp injectors/10mm cp3 on an 06 cr

@treyhaberman 3 ай бұрын

369 borgwarner 30% over s&s injectors Fleece cp3 with airdog 165 4g lift pump Efi live tuner T4 steed speed intake 5" mbrp quiet exhaust

@kurt8986 3 ай бұрын

@treyhaberman awesome video buddy, that's cool is that normal for thet setup that boost # is hi i love it, is the waste gate just set low on mine to be at 38 psi I just prob so a smoke test

@treyhaberman 3 ай бұрын

@@kurt8986 yea the wastewater might be worth looking at. How are your egts?

@babybullsmith001 6 ай бұрын

How much did S&S injectors ? Thanks

@treyhaberman 6 ай бұрын

3288.93 for 30% over. That was also 30$ per injector to test my old ones.

@babybullsmith001 6 ай бұрын

My remans are at 130,000 miles with each of my fill ups ,I treat my fuel with optilube xpd. How long will these injectors last? Your geuss@@treyhaberman

@treyhaberman 6 ай бұрын

@babybullsmith001 you can never guarantee how long they will last. I got some diesel algea in my tank from a bad fill up and it made it past my airdog filters. S&s did say I had bad solenoids though. This is my first time using them, so we will see how long they last. Their customer service was great. I can vouch for that.