Wife " are you coming up to bed darling".. I can't love I have to watch Kevin put a clutch in a Civic..

The fact you did this job under 1 hour is amazing in itself, especially how methodical you are. Amazing work

I love real people like Kevin who know their work who know the hard graft behind things to be perfect and keep running these good old cars, these people are real mechanics and real mechanics who knew every things about cars how they dissemble evrthing and then put back together, now days mechanics are more of just doing service on cars and doing the basics which is OK but not many people want to work hard as due to not high pays but there are some people who don't work for only money but also for fun and to teach us as well show their passion and knowledge, and honor, working on cars on street with basic tools and jack and jack stands isn't easy its not easy even on ramps but working like this is like being a pro I know as my dad is a mechanic and being since 1992 and they used to do clutches and engines on roads with basic tools.

Believe it or not, I'm watching your videos just to relax, due to your superbly smooth workflow.

I don’t understand how you can do work so intricate and not loose or drop a screw. Amazing

I have just purchased this model as a project. Your video was excellent as usual and gave me a good insight into the mechanics of this car. Thanks Kevin.

Sunday treat👍love how you do everything just so naturally and the attention to detail in the filming of your work and down to putting grease on the gearbox stubs. Fantastic work all ways great to watch your videos Thankyou 👍👍👍

People are lucky to have you work on their cars, Kevin. You're truly excellent and it's amazing to watch you work.

Fantastic video - the lighting and clarity is great; if only they were all so clear!

A true professional. Your workflow is sincerely calming.

That’s the first time I’ve watched a clutch replacement video all the way through. It was excellent and so are you. An Amazing and professional mechanic to be admired! Going to see if I can find your website now. Thanks.

He specializes in clutches, but in reality he can be a mobile mechanic. This guy has some serious skill.

Discovered this masterpiece after my clutch started slipping. Was going to attempt it myself but have now seen the light and thought...sod that. I have booked marked your website because you cover my area and can hopefully save the funds i need before my clutch completely fails.

Hiya Kev I’ve been following you for some time now mate And I’ve noticed you know every tool you’ll need For every different car before you start That’s some knowledge my hat goes off to you sir 👏👏👏

Thanks for this boss, 2 weeks later and ive fixed mine lol

See you are still doing an excellent job Kevin, i've done my first clutch change today after many years a Fiesta 1.4TDCI 2006, i watched your video doing a petrol one the other day to see what needs taking off etc the hardest part i had was the seized suspension bottom ball joints etc so i heated up the bolts fotr the shock/hub to take it off there, i did it on my back at 63 now & i cheated & jacked the box back up, the top bolts on the bellhousing & starter bolts (starter at the back) were a pig to get too but i managed, it wouldn't locater the clutch plate so i turned the flywheel slightly & it dropped in, many thanks for your many videos & great success with your business

Patience and virtue of the strong man and you are one of them .Like everyone at the end of the week resting watching your videos. I wish you much luck in everything you do.

At 19.34 u saw the double universal on the top left trans bolt. Sweet!! Hitting the boots with the running ratchet is also way cool. The number of bolts u get with the ratchet is steadily increasing. Save muscling the Big Boy. That 1/2 impact has a lot of weight. This was a standout vid. A lot more work filming, but SUPERB!!

Ive learned alot watching your videos , great work Kevin.👌

Thank you very much for this video. I just replaced mine 2007 Civic FK2 clutch, step by step and it worked like charm. I understand it must be difficult to shoot video and work simultaneously, so I just want to highlight, that in 30:49 its the first and in 31:00 is the 4th screw getting back in order of dismantling. I choked on this a bit, when I started with the top 2 screws instead, thinking that its the top view of activity which was not visible from the side... Anyway, thanks a lot for amazing job.

Great video, I'm thinking of doing the clutch on my FN2 2.0l (euro Type R) so should be very similar. This will be my first clutch replacement on a FWD car.

brilliant work and brilliant youtuber👍👌

Very helpful and detailed video. Thank you for that 👍

Los vídeos de este muchacho son mucho mejores tutoriales que los de algunos canales de enseñanza de mecánica 👍🥇

That was awesome 👍👍 very skilled in yr field 👍👍

KEVIN Tu es championne mec ✌️

Super film dzeki

all that unbolting for a clutch,amazes me how you remember how it all goes back together. i would take out one bolt and forget where i took it from within seconds

Great job! Your Videos are brilliant. ...Alfasud from germany 😊👍

Great work! This gearbox seemed to be heavier than others taking into account the size of the car. And trying yo place both the gearbox and the driveshaft is a plus! Thanks for the video!

Thanks so much. Fantastic video

Really awesome video. Congratulations.

Amazing job!!

G'day good one Kevin, there seams to be more fixtures and fasteners with this job, Regards John

hero you are the nr1

What a work man. Great Job. I have the same car, good to know what the mechanic will do to it, when the time comes. Thanks.

yeah thank you and have a nice day my friend👍

I want one of those electric ratchet drivers! I'm off to change my clutch now, I wish I thought it was going to go as smoothly!

another good one sir thankyou

Fantastic video Kevin, very detailed, proff video shooting, just great job. At the 48mins when you took that sensor out to fill the gearbox back up with oil, what sensor is it and how much oil does it require? Also what tools is that to centralize the new clutch kit , is there a good brand to go for? I want to do it myself just to find the time for it its hard..mine done 130K, clutch bite really at low point, pedal is squeaking when I dis or engage the clutch. Did try to lube it but only work for a short time, wondered if i need to replace the clutch cable as well. What is you opinion? Mant thanks, Regards

The Clutch fork rubber cover is split. How long did this job take you, Kevin?

Hi Kevin great work as always really top quality both on the car and camera work👍🏻 keep them coming please!! I was wondering do you travel to northern Ireland at all to carryout this work?

You are still the best ninja clutch fitter i have ever seen can you fit a stage 4 clutch to this type of car (what clutch do you recommend) plus do you think it is worth fitting New engine mounts whilst you are doing this job. Plus what is the make and model of the electric ratchet you use plus what is the make and model of the impact driver you use.

How many times have we see a throw out (clutch release bearing begin to bind due to a lack of grease, rubber or any other kind? How many times have we seen corroded steel bolts wipe out the threads in aluminum? How many times does the clutch fork bind when the factory installed grease finally washes away? Lubricating rubbing points is done at the factory and redone by Kevin. Having been a tech for over fifty years, u learn your gun, u know how hard to pull your ratchet to achieve the recommended torque. Great skill and attention to every important detail!

good job. you should use magnetic trays for the nuts and bolts.

give you 2 thumbs up wish i was that cool . going to think of you next time i mechanic

this guy can change a clutch in about 2hrs give or take ( accounting moving the camera and so on), all the shops around my area trys to charge me $1000 (9-10hrs) of labor to change my 08 civic si clutch with parts provided by me too. Then I found another shop with a older gentlemen that did it for $300 labor for me instead and it did only took him little over 3hrs to do

Hiya @Kevin-Albert Williams what is the difference between this clutch on the 1.8 L on a 2007 and the 2006 1.8L as they are the same model and you did things a little different? I will be doing my civic soon and wonder which video shall i follow? mine is 2006

Helped me to get my civic done. Big Thanks mate!! Sub from me 👍🏻

It's better if you change the fluid in the slave cylinder and lubricate the spring under the slave cylinder rubbe

another beautiful video of your work. Really well done on your business, you are a very good mechanic. almost better than me ... !!! may I ask you a question? what liquid do you use to clean the flywheel? good job and congratulations from Italy!

Great video and great job, but man, lots of things had to be removed. Not easy by any standards. Thanks.

Love these videos. I’ve got an Audi A2 on my drive needing a new flywheel and clutch, I’m thinking of doing it myself. What is the make and name of the tool for using the socket and extension when it’s not in direct line? What’s the matts you use to lie on? The camera placement is great on these videos. Great stuff.

You should add asmr in the title for us gear heads. Awesome work. How long have you had the steel bar for?

Hi im in need of help urgently, im about to buy a honda 2007 1.8 civic like this , the guy im getting off said the clutch is working fine but engages low from the floor, im wondering if u think it cd be the clutch or the master cylinder ? Its 117k but full dealer history, guy said he will knock 300 off , should i be put off ? Or are both jobs fixable and nothing to worry about? Love the channel! Dave

Great video. I have a really squeeky/creaking clutch pedal which is driving me nuts. It squeeks/creeks when lifting up the pedal slowly eg. pulling off in 1st etc. Some people replace the master cylinder, but is there any other way of (relatively) cheap way of fixing it?

Plot twist: it was just a random civic he found in a car park. Captain clutch strikes again!

Hi Kevin you are the SAS of clutch replacement's. Do you ever consider eye protection especially when hitting the chisel with the hammer. You have my utmost admiration. Stay well .

Hi, I've watched a number of your videos with great interest. I noticed on this civic clutch change you don't pull the drivers side drive shaft is that a new method and does it hinder much getting the box back in? Thanks

Hi On that video i can see the ofside drive shaft is still in on other your videos is taken away why?

Curios at what millage this engine need clutch replacement shame he cover no plate. Good work like always.

That Milwaukee is a BEAST. Lotsa torque. Does the battery last you through a few jobs? Obviously you would have a spare.

What's the rough Weight of this gearbox Please Kevin. and Brilliant job btw :)

Hi Kevin whatever them orange gloves you use? Don’t think I’ve seen a pair split on your videos mine don’t last 2 minutes!

Hola, que modelo y marca es tu llave de impacto angular ?..

Hi William great job very professional, I have a question how much oil did you put in that gear box I cant find the details anywhere. Thanks

I have a similar car and i would like to have my clutch replaced on my 2011 honda civic 1.8 ivtec petrol how much would it cost me were are you based?

Kevin did that 3/8 Milwaukee ratchet remove the clutch to flywheel bolts without loosening them cause it sure didn't struggle at all.

Whatever you charge for this service you can double it in the states. A good mechanic shop will make this a 3-4day job charging $1000-2000

Is this the same procedure for a 2007 1.6?

No subframe to remove or did I miss that?

Excellent job and video, please let us know how much time it took to do this job, from arriving to location to leaving the area. 👍

very well solved. Have you ever received an unsuitable coupling?

Awesome work, as usual, quite a fiddly job these Hondas. What is the make and model of the electric ratchet you use?

hello and congratulations for the work you do pity you are in England and I in Italy I just wanted to ask if you can make a video of the replacement of the two clutch master cylinders also the one under the pedal on the honda civic I saw that you work so hard on it would you solve a big problem for me

I have the same model how much was this to do?

Kevin, have you ever done the input shaft bearing on one of these cars? I'm looking to tackle it with my brother but there aren't any videos on it. May as well do the clutch whilst we are it, seeing as you documented everything on this How-To 😂

Kevin, are you ever asked to make front suspension repairs?

I see you have used axel stands again what happened to the hydrolic lift use was using the other week

Hi Kevin could u answer a quick question for me ( is the PHE4 gearbox same as the SPHM ) many thanks fantastic work by the way kevin

I have the same car same here I don't know if I would have the confidence to do this on my own

What's the quickest and easiest car you've ever done a clutch on?

great work! is this i shift(automatic) transmissio or manunal transmisson?

how heavy is that gearbox?

how much does it cost to replace the clutch on average?the work itself.

i never knew you can use rubber grease on the shaft.

Hello mate, is this clutch replacement, similar with the clutch on the I-shift gearbox?

Wer guckt noch aus Deutschland zu?😀🙋‍♂️

De q pais você e ???

Why did you disconnect the driver side driveshaft, doesn't it just slide off once the other side is off?

which impact wrench do you use. please provide a link :)

Hi Kevin. I changed my clutch my self after watching your job but something i missed up i think because if the engine is off i can shift easily but when the engine is running I almost can not put the shifter in the gear. Can you help where can I find the problem? 😔

No sub frame? NICE

Kev likes my comments put it this way i wouldnt like curbside doing my gearbox? 🙄🤔

I notice u leave the one axle completely alone. It serves to stabilize when u reinstall trans. Have u always done it that way? Only on cars that allow the trans to move straight off the axle. Correct?

Yes all great but U waste Ur time for example why U separate ball joint risking damage. Why dont disconnect tie rod end and two screws of. Mc person. Is much easier. 🤔 But Is good tutorial Anyway U are Master 🍻💯🤜

Con que líquido limpias el volante motor ?....

Don you have any tips for lifting the gearboxs back into place. You always seem to lift them in so easily 😂

Can you flight to California to replace my clutch? 😆

Curbside mechanic makes it hard work and slow 🤔🙄😀