07376369067 www.williamsmobileclutch.co.uk Support the channel: www.paypal.com/donate?hosted_...
Пікірлер: 480
@billymurie39503 жыл бұрын
I’ve been a mechanic for 40yrs and I truly admire your working in all weathers , been there myself and still servicing .Kevin you have a special gift good luck in the future. Billy
@WMCS3 жыл бұрын
Thank you for the support Billy.
@gamelias873 жыл бұрын
My car is on the roads, because of your videos. I don't trust silly garages, i trusted you and i wasn't disappointed. Thank you!
@greyghost19623 жыл бұрын
Do this kind of work only when I have to, brutally hard work, knees, back, arms, hands... good going Kevin! Stay strong, very few of you guys left in the world. -U.S.A.
@lionheart19163 жыл бұрын
Doing that job with the car on the ground... you've got my respect 👏
@GhostRider2473 жыл бұрын
too bloody right he has !!!!!!
@alessandrer36163 жыл бұрын
The best mechanic in UK ! Thanks for sharing ! Respect Kevin !
@MultifunctionKaTech3 жыл бұрын
Absolutely!!!
@drivetime42523 жыл бұрын
Your unreal. What a guy. I was a mechanic for 6 years. Hated it. And it worked in a garage. All credit too you doing all this on people's drives.
@stemartin66713 жыл бұрын
I still am, and still hate it lol 😂 need a career change I think haha
@peasmold12343 жыл бұрын
The Civic was a bit of a marathon, I'm 74 and did this sort of thing in the70's and 80's and have the bad back to prove it. Take care mate it will catch up with you.
@WMCS3 жыл бұрын
Tom it’s great to hear from a fellow mechanic. We as a generation are no match for the boys working in coal mines and the trenches of both world wars. We have got it good. Everyone is quick to be Wooly wrapped.
@sidrana28283 жыл бұрын
Your a strong young man lifting them boxes up into position 💪
@rjindustries23113 жыл бұрын
I served in the Army doing this in the field for 17 years as a REME Vehicle Mechanic on everything from Land Rovers all the way up to biggest Trucks, Tanks, Armour, Generators and Plant. Bench pressing those Gearboxes into place takes strength, I’m by no means the smallest of lads, strength and size always being the key and I’ve done a few jobs like this in my time. Total respect to Kevin his work ethic and quality of job is to be admired. Keep it up mate
@WMCS3 жыл бұрын
Thank you for the input. And for the feedback.., greatly appreciated. We’re not too far apart in our past career.
@Victor-fn4np Жыл бұрын
Just did this on a 2006 CRV CDTI, thank goodness Honda wasnt stupid enough to put top starter bolt through gearbox, otherwise it would have been radiator off job. You're a legend Kev, keep up the good work!
@warwickscram59253 жыл бұрын
Great cars those MK8 Diesels. Fast, reliable, good on fuel. No dpf and chain driven rather than belt.
@Matt-uh3mg2 жыл бұрын
Bonjour Kevin, merci pour cette vidéo, c'est grâce à toi que j'ai pu réaliser en environ 10h-12h l'embrayage de ma civic 2.2, et c'était une première pour moi. Le travail est juste épuisant, j'ai été aide pour engager la boîte de vitesse tellement elle était lourde. En tout cas bravo à toi et encore merci pour ton aide ! Matthieu
@joshfitzpatrickremovals51553 жыл бұрын
As a competent DIY mechanic, it`s a pleasure to watch top professional at work.
@Keefteef3 жыл бұрын
Amazing work, man. Plus the camera angles and positioning is excellent. Feel like I’m under the car with you! Thanks and subscribed. 👍👏
@nickpierpoint41163 жыл бұрын
So glad I discovered your channel mate, love getting to see how a pro does it
@ErikTheVikingMechanic3 жыл бұрын
This is where your previous behind the scenes video ended. This Honda is a right faff. They didn't have to made this complicated. Great work Kevin
@WMCS3 жыл бұрын
That’s correct. This is what I mean comparing working on European cars ie VAG’s over Far East cars. Too many little brackets and over engineered unnecessary clips and retainers
@soilmanted3 жыл бұрын
@@WMCS The last VAG I worked on was ridiculously over-complicated. To get the filter for cabin air out of most Far East cars you push in the sides of the glove box, pull out the box, unclip a cover, and pull out the filter. For VW New Beetle, I had to push out parts of the dashboard under the windshield, to get access to about 18 threaded fasters, then remove the bracket for the filter from its place under the dash, then remove the filter from the bracket. Some of the threaded fasteners were very close to the windshield. Whatever kind of head they had, maybe it was a Torx, there was little room to access it and turn it. Presence of windshield directly above the fastener heads reduced turning radius of the wrench handle. I wouldn't be surprised if the VW service literature suggested removing the windshield in order to access the cabin filter. If that wasn't bad enough, the air duct under the filter was lined - on the _inside_ - with urethane foam. Why anyone would design an air duct to have insulation on the inside surface where the hot or cold air contacts it, is beyond my understanding. And on an 18-year old car - it had become friable. As soon as I turned on the fan after replacing the old, blocked air filter with a good filter - the fan start blowing little pieces of urethane foam into the cabin.
@Stormf0rce9993 жыл бұрын
I am a mecahnic, massive respect to you for doing it on the floor! Clutches can be pain in the butt even up in the air on a two post ramp!
@sudinebabz86513 жыл бұрын
👍🏼great job again Mister clutches warrior 👍🏼
@pauld78613 жыл бұрын
Commando of Clutches man this job looked ridiculous and you still pulled it off without a grunt. Hats off again Sir admirable work as usual
@WMCS3 жыл бұрын
Thanks Paul..,, appreciate the support
@edmac82123 жыл бұрын
first class job need more good honest workers like you
@eliejeffredo34633 жыл бұрын
Bonjour Williams, je suis français et j'adore votre vidéo, on vois que vous êtes un grand professionnel! Dommage qu'il n'existe pas de gens comme vous en France
@WMCS3 жыл бұрын
Merci beaucoup Elie.., et bonne soire
@richardsedorski12063 жыл бұрын
Fab vid the close ups were brilliant the amount you had to take to get stated was unbelievable well done.👍👍👍
@Blacklab993 жыл бұрын
Next time I’m down the local garage and they are giving me a hundred reasons they can’t do something and how difficult everything is, I’ll point them to this guy. Absolute respect. Get’s on, does the job, no excuses.
@WMCS3 жыл бұрын
Oufff they’ll come looking for me Steve 😆
@wellwh03 жыл бұрын
That is true. Everytime I need to get done some bigger job, first they say “well on these that is little bit complicated”. Though that is only talk to justify price 😅
@dannyyo79483 жыл бұрын
Your Tools are TOP NOTCH, just like your workmanship.
@scotspie501douglas73 жыл бұрын
Kevin I work for a generator company and your some grafter every video well done you as your post says a warrior love your videos amazing
@gandi693 жыл бұрын
I’m not a mechanic but having done clutches in this way in my own warm garage and even then it’s not much fun. Hats off to people who would do this in the cold, outside then also have to travel to do it. That’s graft
@davidbennett28772 жыл бұрын
That's one of the best videos I've seen you are good mate a proper mechanic
@1973miniclubman3 жыл бұрын
This guys work ethic is just epic very militant Proper organised and everything seems seamless and effortless, a highly skilled man at work👌🏻👌🏻
@neilnewbon39572 жыл бұрын
Superb how to video, none of this just undo this and remove that stuff, this guy shows you everything and it's very useful, made doing my clutch so much easier. Thank you very much Kev, much appreciated.
@WMCS2 жыл бұрын
Thankyou. Glad it came in handy.
@necridkee3 жыл бұрын
The Best as always! Great job Kevin!
@robertaccorsini46633 жыл бұрын
Nice work. You know what you are doing and are fearless. I’ve done many of my own on my back, not easy. In New York, rust is a real problem.
@WMCS3 жыл бұрын
Robert great to hear from you all the way from New York. Really appreciate your review., especially coming from someone that’s done a few.
@mrgrumpy51163 жыл бұрын
well done mate .. we were both struggling a bit when you were trying to line that box up, I was glad when it went it.
@WMCS3 жыл бұрын
It was a heavy one this box. In my opinion a good 70kg. Not sure what those Japanese but in there 😆😁
@sebajaski66513 жыл бұрын
Naprawdę po pana filmikach wygląda naprawa na prostą a robi to pan z taką łatwością że tylko podziwiać. Pozdrawiam 😊👍
@porkbap553 жыл бұрын
This blokes fire started binge watching these now top work and very professional
@WMCS3 жыл бұрын
Thanks for the feedback
@porkbap553 жыл бұрын
No worries mate keep em coming what's the worse one you have had to do ? This one looked a mission lol
@romanswift61872 жыл бұрын
Thank you for such a detailed video, planning to do same job. You gave me some confidence!
@philiprogers4071 Жыл бұрын
Well I was going to replace my clutch myself, but I don't think I will bother. Thanks for sharing. Great camera placement.
@tambovsky3 жыл бұрын
Thank you for full in-depth step by step video.
@mickl82122 жыл бұрын
You have my FULL respect on this. I did the exact same job on my drive and never will again!!
@WMCS2 жыл бұрын
😁., thanks for the feedback Mick. Glad to hear you managed it alright.
@mickl8212 Жыл бұрын
@@WMCS I struggled like hell getting the gearbox back on and had to call a friend for back up. Once he was able to see the angle was very slightly off, it slipped on easy. Like I said, never again though. Not enough room for my liking.
@gyulaugocsai54635 күн бұрын
Amazong job, Kevin! All of my admiration goes to your skills!
@MrCATHALM33453 жыл бұрын
Fair play man working out in this weather 💪 I thought it was cold in the garage before starting the heater 🤣
@WMCS3 жыл бұрын
It does get warm very quickly under there tho. 😆
@captainpotato68563 жыл бұрын
@@WMCS yea if u put i heater under there you would get grouchy a.f and start throwing stuff lol! 🤣🤣🤣
@Intruderzz3 жыл бұрын
I am also a Mechanic from Ireland, 25 years experience,keep up the great work,love all the vids,I use Milwaukee tools too and the battery just falls apart after a few months,I noticed you have tape on yours 😊, 🤛👍🍺
@WMCS3 жыл бұрын
Paul what a nightmare with the tiny battery screws. I had to super glue it. Then super glue a rubber band around it then duct tape. Those little iPhone screws just don’t cut it does it. Thanks for the thumbs up 🍻🍻🍻
@Alihussankhansab3 жыл бұрын
I salute to this strong man ,, excellent job in a minimum time, I bet nobody can do fast and Fantastic like him in the wold.
@hmongmeskas74453 жыл бұрын
The best video on youtube. Thank you for post video n teach us how to fix car. God bless you and your family.
@rayj333 жыл бұрын
Imagine working on the stranger's car without knowing its history in the cold and rain.
@n.alfasud5103 жыл бұрын
Hello, I am from Germany. Find your videos great and educational. Whenever I have to do a clutch, I always watch your videos. Please go ahead. Thank you!
@WMCS3 жыл бұрын
Thank you.
@madbbtk36823 жыл бұрын
He's the man what can this guy is unreal
@Gunmasters3 жыл бұрын
You have fucking hard Job 😅 We are with you !!! Thanks for Sharing your Experience with us.
@marcoocone17813 жыл бұрын
I always appreciate your videos thanks
@elvale43912 жыл бұрын
Enorabuena por fin un vídeo que lo enseña todo de principio a final muchas gracias
@simonsweeting3 жыл бұрын
I salute you. A: your work is amazing but B: I didn’t want to damage my ball joint removing my hub 💪
@johnkinnane5473 жыл бұрын
G'day mate and greetings from Tasmania Australia 🇦🇺, I think your a marvel how you put new clutches in and in the open and in all sorts of weather and on your back. What you do is great I've watched you do a few so I have decided to subscribe thanks for filming it and I look to the next instalment, kind regards John
@WMCS3 жыл бұрын
Thanks John. I genuinely appreciate your feedback and for the sub .,, drinks on me 🍻🍻🍻
@vibsreng47963 жыл бұрын
thank you for your videos. I succeeded in changing the clutch of my civic thanks to you. first time. The gearbox is really heavy, you suffered too. Thank you.
@WMCS3 жыл бұрын
Really great news. Definitely a little bit heavy the gearbox.
@vibsreng47963 жыл бұрын
@@WMCS for my first Clutch, I'm really Happy. Thanks a lot for your vidéos. I hope i will open my own business soon...
@lobaman1233 жыл бұрын
extremely sharp and professional!!
@messaoudaboudissa49353 жыл бұрын
اراقب ولا أريد النسيان احتاج للتركيز لفتح الذاكرة ((((كل ما تقوم به يجعلوني سعيد لان العملية التي تقوم بها سهلة وغير معاقدة بفضل وضعية الكاميرات ٥ لها تصوير ثلاثي الأبعاد وهذا جيد جدا ، الفديوهات الجد ممتازة.
@15mechanix3 жыл бұрын
Buen video, aquí siempre siguiéndote, saludos desde México.
@brianmcintyre142 жыл бұрын
Great video, you can learn more than just a clutch replacement 👍
@masseyfergy682 жыл бұрын
Nice to watch someone who knows what they're doing kerbside style excellent !
@WMCS2 жыл бұрын
Thanks for the feedback
@francisrubio35133 жыл бұрын
Brilliant!! Perfect Job!! Thanks for upload this videos.
@philipbennett21833 жыл бұрын
This is hard graft , fair play to you , been there done it (many years ago now) .
@WMCS3 жыл бұрын
Always nice to get a feedback from a fellow mechanic.
@tanveerkhan92213 жыл бұрын
Another brilliant video u must have the will power of a lion. U are too good I can't believe u are not on tv u will make ed china look like an apprentice.
@andriyshulgaty270811 ай бұрын
As usual is very helpful video. Generally it is unbelievable useful content! Thank you!
@matty50573 жыл бұрын
Good going mate! You have some strength there to lift them boxes up and in on your own! Fair play! No need for the gym when you do this everyday! 💪
@WMCS3 жыл бұрын
Only thing I want to do when I get home is eat and chill 😁✨.,, hope you’re keeping well your end.
@matty50573 жыл бұрын
@@WMCS I'm just the same mate, and im in a comfortable garage lol. I take my hat off too you buddy, I done the AA for 12 years, It's not easy mechanicing outside. All good here cheers mate, battling on. You keeping safe? You on Instagram mate?
@aquahits56743 жыл бұрын
You made it look so simple 👍
@Frol3R Жыл бұрын
Excellent Quality vidéo, thank you for the work. Amazing filming plan m8. We working with you.
@WMCS Жыл бұрын
Thanks for the feedback. Much appreciated
@gerryduggan68213 жыл бұрын
Amazing man ! Good on you mate , your attention to detail is perfect ! Everything is as it should be ! Good honest quality work💪 I will be definitely getting mine done when needed Amazing another great video totally enjoyed it 👍
@WMCS3 жыл бұрын
Thanks for the feedback Gerry.
@gerryduggan68213 жыл бұрын
@@WMCS How could i not mate ! This is how it should have been done all along ! Brilliant Kevin It Helps everybody out when done this way Again thanks forbthe great video buddy 👍👏I really enjoy them 👍
@Octocoupler3 жыл бұрын
Scary amount of work.
@dodge_walks3 жыл бұрын
33:51 love your jack technique :) Awesome work
@WMCS3 жыл бұрын
Thankyou for the feedback..,much appreciated.
@JoaoCosta-pb1vd3 жыл бұрын
Um grande abraço de Portugal, és o maior 👍👏👍👏👍
@malcolmcroll3 жыл бұрын
this looks a very hard job ;great to see it done ;;
@HCrawf3 жыл бұрын
Hi Kevin, therapeutic to watch as always, great work! What brand are those long spanners that you used quite a bit in this video?
@hardman72433 жыл бұрын
Great man may God bless you
@RicardoFernandes-zd4wy3 жыл бұрын
Top de mais precisamos de proficionais como vc no Brasil...
@WMCS3 жыл бұрын
Saludos
@cmautolink6563 жыл бұрын
Great work - difficult job even with a ramp. 👍🇮🇪👍
@andrewyeo23533 жыл бұрын
Fair play to you proper hard graft removing gearboxes on driveways
@SgxNaaBoy3 жыл бұрын
This videos are therapeutic in a weird way.
@seebe20843 жыл бұрын
I’m always saying the same thing on these transmission videos
@wellwh03 жыл бұрын
Beacuse he is doing it like milk and butter. I bet I would break half of plastics, bolts and had extra parts at the end 😅
@franciscovegamunoz23493 жыл бұрын
Buen trabajo amigo. Solo los mecanicos sabemos lo ke pesa meter una caja de cambios sin elevador. 👍
@Falco45able3 жыл бұрын
Class , stay safe fella, 👍🇬🇧
@naseral-omari78593 жыл бұрын
Amazing job!❤
@johnbrevard59663 жыл бұрын
Total admiration for this man and work he does.. But, 36:50 is just putting toxins into environment for no reason... I did a clutch in a jeep on the ground in snow when I was 26.... I give this man the Lifetime Achievement award for what he does as its Skilled, Hard, and requires a certain man to do!
@markb14873 жыл бұрын
Great video, great quality content.. Top quality work.. 💯👌👍💯
@8kober3 жыл бұрын
Jesteś niesamowity
@azizboudehbi32443 жыл бұрын
Great job kevin
@fidzer19743 жыл бұрын
This channel popped up on my recommended videos a few days ago and can't stop watching for some reason! Some graft. One thing I've noticed a lot in your videos is the state of discs on some of the cars your working on. You should offer a disc and pad change service as well given the fact your in about them any way. But then where does it stop, it'll be drive shafts, CV joints, the lot.
@aquahits56743 жыл бұрын
Another excellent video top man
@menorthedge3 жыл бұрын
That pretty cool kev
@captainpotato68563 жыл бұрын
Tons of play in that dual mass 🤪 I'm going to do mine soon ,it rattles when i turn the motor off ,clutch slips aswell.
@miguelsalgado49483 жыл бұрын
Parabéns. excelente trabalho.
@justintasht10673 жыл бұрын
Full respect to you rain or shine your there great skills and must have bionic chest muscles lol👍👍
@blanc55223 жыл бұрын
Holymoly.. this guy is a real. Respect from South Korea.
@1983woz3 жыл бұрын
Kevin, top man thanks for sharing buddy 👌
@WMCS3 жыл бұрын
Thank you.
@lovesjw3 жыл бұрын
Very good work. Respekt!
@captainpotato68563 жыл бұрын
Reminds me of when i removed the gearbox from my jdm integra type r and fitted an exedy clutch kit ,built up and my g box was still wining ,i thought it was the release bearing,it wasn't lol it was the output shaft in the transmission ,gearbox removed on drive again 2 months later as it got so loud lol! 🤣 took 3 of us to roll it out on a jack and 3 of ys one to position the jack whilst 2 of us lifted and fitted the box back on. Noce job on an integra dc2 but damne! The box was huge! L.s.d ! Was also on our backs but i did most of the strip down and rebulid,twice! Ha!
@AlaaAlaa-uv3jr3 жыл бұрын
Thank you from Germany 🤙
@kamar3173 жыл бұрын
excellent comme d habitude
@gilleszinty91822 жыл бұрын
Thanks you a lot for this !
@faridmiah772 жыл бұрын
If only I had an atom of your knowledge, just love the way you approach the disassembly. Like and a sub from me sir 👍🏼
@soilmanted3 жыл бұрын
Man is a contortionist. At 33:45 he's got the engine supported by the rolling hydraulic jack, he slides under the transaxle and supports it with his arms and hands - and while doing that he uses his right leg to push on the handle of the rolling jack in order to lift the saddle of the rolling jack and thus lift the engine up into a more comfortable position for pulling the transaxle out and down with his arms and hands onto his stomach, chest, arms, and hands. I suppose that working the jack himself is probably safer than waylaying a passer-by to do it.
@zoltankocsis69273 жыл бұрын
Great job Kevin!! why not using "tite wrench" special extension tool? much easier screwing in many cases