2013 Ford Edge Transmission 2.0 Turbo

  Рет қаралды 13,413

Car MechaNick

Car MechaNick

3 жыл бұрын

Ford seriously loves thread locker, i mean they LOVE it.
Thanks for watching!
Holy cow, 410 subscribers! That's awesome and I thank you everyone. Thanks to those who leave me feedback too. Keep watching, because I have way more to show you all!
I've never been taught to film or edit, so please bare with me as I learn on this journey. Thanks again!

Пікірлер: 17
@TommyG11814
@TommyG11814 3 жыл бұрын
Good work Nick
@CarMechaNick
@CarMechaNick 3 жыл бұрын
Thank you. Thanks for watching too!
@TommyG11814
@TommyG11814 3 жыл бұрын
You do a great job, I enjoy watching this newer technology
@CarMechaNick
@CarMechaNick 3 жыл бұрын
Thank you very mucn.
@kylestenger15
@kylestenger15 2 жыл бұрын
Doing one tomorrow. You you can just remove the left Tran mount and let it hang down with the engine until you can raise it and get a stand under it?
@CarMechaNick
@CarMechaNick 2 жыл бұрын
What do you mean? You can let motor and trans hang together. I wouldn't separate them without the other being supported.
@zackaryrients1863
@zackaryrients1863 Жыл бұрын
I'm removing a 2016 edge 3.5l 6f50 and Trans. Aldata says to start with removing upper intake... is it Necessary?
@CarMechaNick
@CarMechaNick Жыл бұрын
Could make things easier to access. I usually make those types of calls myself. All data says to take some engines out of the bottom, I do them from the top. Do what you think is necessary.
@skyloz6980
@skyloz6980 Жыл бұрын
Does the 2.0 share the same transmission with the 3.5?
@trentjames315
@trentjames315 11 ай бұрын
No for 2.0 it’s a 6f35 and 3.5 is 6f50
@brandimarie07
@brandimarie07 3 жыл бұрын
my gosh you had to remove pretty much everything.. I have a cracked flexplate on mine... I'm pretty good with mechanical stuff, but this is insane lol
@CarMechaNick
@CarMechaNick 3 жыл бұрын
It's honestly not to bad! 😊 thanks for watching!
@brandimarie07
@brandimarie07 3 жыл бұрын
@@CarMechaNick I fixed it, didn't pull the transmission out completely.. Just unbolted it enough to pull the flexplate bolts outs and swap in a new one.. Time to sell the car LMAO I read this is an issue with the short block.. and it will crack to plate again.. mine is way out of warranty
@CarMechaNick
@CarMechaNick 3 жыл бұрын
That's awesome, I've heard of people doing them that way with several cars. You aren't kidding! Get yourself a Toyota or Honda in sure you'll fall in love.
@zackaryrients1863
@zackaryrients1863 Жыл бұрын
​@Car MechaNick I'm removing a awd 2016 edge Trans. Is it necessary Nick to remove the upper intake per alldata?
2007-2019 Ford 6F50/55 Six Speed Transmission: Fluid Exchange Procedure
11:48
2013 Ford Flex AWD Transmission Removal
1:11:17
Car MechaNick
Рет қаралды 8 М.
Became invisible for one day!  #funny #wednesday #memes
00:25
Watch Me
Рет қаралды 60 МЛН
GM 1.4L Turbo Water pump and oil leak fix
29:49
Car MechaNick
Рет қаралды 12 М.
This is Why You NEVER Want to Follow FORD Recommended Maintenance Intervals
6:18
Ford Edge transmission problem
7:27
Rosa & Angel
Рет қаралды 263 М.
Top 5 Problems Ford Edge SUV First Generation 2007-14
7:31
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 780 М.
2013 Ford Edge Eco Boost 2.0 Transmission Fluid change
5:41
Nestor Macias
Рет қаралды 12 М.
08 Ford Taurus 3.5L AWD Transmission
32:00
Car MechaNick
Рет қаралды 11 М.
Crossing the Most Dangerous Crosswalk
0:24
Zach King
Рет қаралды 11 МЛН
Audi R8 in coca cola #shorts #youtubeshorts #viral #shortsvideo #shortsfeed
0:13
Official Hasnat Gamer
Рет қаралды 2,9 МЛН
🤣ПОКУПАЕТ МАШИНУ У ДЕВУШКИ
0:35
MEXANIK_CHANNEL
Рет қаралды 7 МЛН
Наткнулся на заброшенный гараж🤨
0:36