Nice!! I like it! Clean club style. Any time a person switches over from the crotch rocket world to a respectable cruiser it is always a huge victory for all of humanity. I have a 2014 Bolt also. Like you I dove in right off the bat and started customizing and changing everything. Now mine barely has any of the original bike left, lol! I do love mine to death and it's an absolutely awesome bike, but I can feel myself already growing out of it a little bit. I'll probably keep mine at least through this year (2022). Then come this winter I'm going to look into trading it up for a Street Bob or Lowrider. I finally got to ride both at my local HD demo days a few weeks ago and my God that 114 and 117 are beast! They are literally twice the motor the Bolt has. After doing that it kinda sealed the deal on wanting to trade the Bolt up.
@dannyluong83944 жыл бұрын
Bike looks good man. I’m planning to go the same route
@mathewsanchez30962 жыл бұрын
You got a link for those turn signals in the front? I put a springer on my bolt and need some of those.
@baching29812 жыл бұрын
Hey Budd can you please show me how you installed your faring ? Thanks in Advance
@curtis4u22 жыл бұрын
How long did it take to get the ecu back after getting it reflashed? I mean from the day you sent to the day you got it back. Thanks in advance. Bike looks awesome btw.
@richardromero64232 жыл бұрын
How did you install the front fairing!?
@Yamahog3 жыл бұрын
Looks awesome K..... But I cringe at the idea you want to put a chain on it. ( chain lube will mess up the rims, etc, etc). The belt is soooo much less maintenance, from my stand point. .... Mine's a 2019 Raven build.
@jeremyquirion88373 жыл бұрын
Sweet video, got the link for the handle bar adaptors? Got myself a Biltwell Tbar and i will need this since the bar is 3,5in in between the bolt holes
@chrislsarac3 жыл бұрын
i got them at sscustomcycle.com! I'm not sure if they still make them, but they have a whole section for bolts on their website! If you dont see it you can always call and ask if they can custom fab one up for you!
@billy14274 жыл бұрын
Nice looking bike man! You’re gonna run out of things to do. Haha There’s a company I got an LED flasher relay from that is plug and play to fix the hyper flash turn signals.
@simplybuilt_17082 жыл бұрын
What's the link for it? I just got led bulbs and it hyperflashes lol
@ChristianMartinez-wq9yf2 жыл бұрын
Where can I get that muffler?
@bryanvalencia45043 жыл бұрын
I just got the same fairing windshield, to install where do you bolt the mounting brackets do I have to drill them on or are there screws under the handle bars??
@chrislsarac3 жыл бұрын
there are 2 allen screws under the top triple tree.
@wgp51502 жыл бұрын
Grabbing this bike this week! Can you leave the eBay link for the fairing windshield? It looks great!
@matthewewashko72513 жыл бұрын
What kind of exhaust is that? I bought the same bike, I think I have to the same exhaust based off looks just not sure what it is
@chrislsarac3 жыл бұрын
its a baron exhaust slip on. i switched to a road rage 2 to 1 full exhaust.
@crispy21553 жыл бұрын
How's the wind deflection from that little fairing?
@chrislsarac3 жыл бұрын
lol what wind deflection? that fairing is strictly for looks. Only the super tall ugly ones will actually shield you from the wind.
@OGCJ103 жыл бұрын
I have the same bike. How do you clean your air filter ?
@chrislsarac3 жыл бұрын
i use k&n air filter cleaner oil. i clean it every 500-1000 miles.
@davidsuruy33834 жыл бұрын
Can you leave a link for the SoCal bolt frame sliders?
Nice. Very nice. While the turn signals are very nice too, I don't think they provide sufficient visibility for the many drivers who don't care for the lives of bikers.
@jaygrewal14213 жыл бұрын
Did you have to get a fuelpak or have ecu tuned after air intake and exhaust installation?
@chrislsarac3 жыл бұрын
I went with Ivan's Flash ECU.
@jaygrewal14213 жыл бұрын
@@chrislsarac Thanks. I just spoke with Ivan's about mine. I have 2021 Yamaha bolt and wasn't sure if he could do it but he confirmed that its the same unit as previous models
@SuperDiablisimo3 жыл бұрын
Did u use extended cables?? If so how much longer??
@chrislsarac3 жыл бұрын
yes i did. 8 inch risers and the handle bars had a 4 inch rise so total 12" rise. I used 4" longer than stock from revzilla.
@imalatino23 жыл бұрын
Bro, I can’t find one out here in SoCal. How much did you pay for this bike?
@chrislsarac3 жыл бұрын
Yeah this bike isn't very popular since everyone in California is all about Harleys. I aint gonna lie, i'm selling mine to get a harley, but I know i'm gonna regret it because this bike is super fun and much more reliable than any harley.
@Yamahog3 жыл бұрын
@@chrislsarac So what's it gonna be.... A Street glide or a Sport glide or ???? .
@chrislsarac3 жыл бұрын
@@Yamahog picked up a 04 dyna low rider.
@chivy24603 жыл бұрын
How much did u pay for it like to know what they run for cause I found one for sale
@chrislsarac3 жыл бұрын
i got a killer deal for it. but they're going for $3500-$5k.
@Bpazedits3 жыл бұрын
Nice bike 👍🏼. Where can I find those turn signals?
@chrislsarac3 жыл бұрын
amazon!
@ivancoellar3 жыл бұрын
I can’t find the signals in Amazon. Please help us with the link! Tks bro!
@jernylflores52073 жыл бұрын
Where did you get your t bar?can you send me link
@chrislsarac3 жыл бұрын
Risers I got from Amazon.com. Handlebars I got from revzilla.com. They’re tc bros mid bend bars and risers are 8” pullback
@jernylflores52073 жыл бұрын
@@chrislsarac can you send me the link of the item you get for handle bar and riser i can’t find for yanaha bolt thanks in advance
@williamrae99542 жыл бұрын
Cables....Venhill Engineering(England) a lot cheaper and custom made for a lot less than you paid!
@erniearruda88613 жыл бұрын
Dude what’s the reason you have a Honda logo on your Yamaha bolt. That’s sacreligious