Lolo Groovy, I believe you live in the States, right ? I must remind my kababayans here in the Philippines that the Mitsubishi Lancer featured in Lolo Groovy's blog ( Lancer ES) is different from that sold in the Philippines ( Lancer EX), although they look the same. The Philippine version was equipped with a conventional automatic transmission and so requires the Mitsubishi / DiaQueen SP III ATF.

From Australia, best video I've seen for transmission fluid and filter change for mitsubishi lancer. Thanks mate. Keen to see some more videos from you :)

Amazing! It took a while but once I found the dw 40 I sprayed it the passenger and the passenger got out right away! Thanks!

Thank you to everyone who watched my videos and support my channel! This is the link of my video on how to replace the transmission cooler filter kzfaq.info/get/bejne/ncuWiped2MC3Zok.html This filter is important for the good circulation of the transmission fluid. It is best to replace this filter the same time you change the transmission fluid. Again thank you for your support!

Good info for lancer owner, there is cvt oil cooler you need to change. Its place at the bottom off the battery.

Very detailed! I would skip the silicone, not needed if the surfaces are flat and clean and properly torqued. In the old days it was a standard step, but no more. You risk getting clumps of silicone floating around in the fluid and blocking tiny passages or interfering with the various belts and mechanisms, not to mention the big PITA next time you have to use a pry bar tool for removal and risk bending the thin pan and hassles of removal. Just check for drips and retorque as needed. Thanks for the soft mellow music, I won't watch the videos that sound like a pinball machine or have loud music. I bet next time you could edit this down to 1/2 the time or more and get more views?

no need pong ibagawa or i pa check ,maitenance ang sasakyan kayang kaya ang lahat ng bagay..happy for you Daddy...

Lolo napaka important ang oag share mo na eto lalo sa may mga sasakyan, pinanood ko gang dulo po

HeLLo LoLo grooVy Good JoB nice sharinG video big Like 👍

Great video Lolo Groovy. Very detailed and easy to follow along!

Galing mo talaga lo. Di mo na kailangan pang dalhin sa service center at magbayad... Liked 👍... Stay safe 🙏..

Thanks for sharing Lolo Groovy pati sa sasakyan magaling po kayo.☺️👍

Hi Lalo, thanks for the video. Can you tell me the routing of the coolant lines into the CVT filter that you remove to access the filter.

Salamat Po for sharing this informative video... full watched

Great sharing 😊👍

Watching here kabayan nice sharing nice blogging salamat po

Excellent detailed video! I've been hesitant to do it but my Trans whines after long trips & seems sluggish so I figured it's best(only 75k on it). Also not shelling out 400 for Mitsubishi to do it with only a 70% clean. 3 questions, is yours a 2.0 or 2.4? Also any unexpected issues during the change or after? Was this normal maintenance or was yours making a whine/sluggish?

DW40 😂😂 3:30 Good work!

Another informative content na naman Lolo God Bless 🙏🙏🙏

Very effective lolo, thanks for sharing.

Hi Lolo, thank you for your videos, they helped me alot! Could you tell me if i can wash and reuse the metal return pan filter? not the one for the cooler, but the one inside the sump tray, thanks!

If you already changed the transmission filter, you should have changed the one in the cooler

Thank you for this 😊😊

Thanks for the tips uncle!

Galing mo lolo G!!! All around!

Nice job .

Very well done sir!

Napakahusay nyo po kahit anong gawain

Hero right here

Bravo Lolo Groovy!

I did not see you put a new transmission gasket when you put the pan back on?

Hey Lolo, great video. very detailed. However, you used a silicone for this process. Is this something that is needed or was only a personal preference. If silicone is needed, what would you recommend? Thanks very much in advance for your response..

Good Day my friend. I like your video. I have a Lancer 2014 and l am wondering how many quarters should l use to change the cvt fluido. 7.5 quarters? Thabks so much.

How much torque in Nm for oil pan and thank you for the helpful great video.

very good 👍💪🙏

Salamat po 🇵🇭 … mabuhay!

Generally a good video but do not use silicone sealant on the transmission gasket. Silicone both swells and can ball in that environment and get into the valve body and other critical control areas of the CVT. If you must use a sealant use an anerobic sealant such loctite 515 or similar. There was far too much silicone used on that gasket.

Another informative video fr lolo groovy!

Nice po Lolo!!!

Hi my friend, l would like yo ask you if it is normal that this mitsubishi consume coolant from the reservor? I have seen that level reduces in my Mitsubishi. thank you

What was the part number! Pls I need to know

Hi brother what about transmission cooler filter under the battery?

dropped oil and replaced without changing filters yesterday and cars gone into limp mode with code p0868, not sure whats going on D: great video tho might have to swap filters

Thanks for the video sir, i have 2009 lancer gt with 322K on it, I haven’t change my cvt oil till now, is it ok if i do it now! Or it would damages the transmission?

This one brother

I have 2015 Lancer ES 100K mileages. Can I just drain the transmission fluid without take off the pans?Why do you need to take off the pans? What worry me the most, your gasket could leak when you remove the gasket the pan. Put them back with specific torque. The specific torque is important.

Can you do the cooler filter underneath the car? I watched another video where it was near the drain pan.

I have a Mitsubishi Lancer 2008 my problem is that my car is not moving in no gears and making a loud noise by the drive side wheel could some tell me the problem do I need to change the oil?? Or is my whole car fucked?

When do I know if my Lancer mileage is too high to do this fluid change along with the filter under the battery or if I should leave it as is

do you need silicone around the gasket? i heard people just screw the back on and it’s fine??

Filter must be need to change?? Any way to clean filter for re use filter???

what different cvt oil J1 and J4? because my dip stick is J1

What engine 2.4 mivec? 4 cyl? Like 2017 outlander sel?

Bonjour sur boite vitesse manuelle faut mette combien de litre huile surtout laquelle

- 17:50 - The oil level is not visible on the oil dipstick. Where is the exact max and min on the oil dipstick❓

I got a 2015 lancer es 118k miles. Would it be safe to change fluid and filter or let it be

May I know what is the torque for the oil pan screw?

Le falto canbiar el filtro cvt uno pequeño

Is there a filter also under battery have you heard about this

how to Check cvt oil level run the engine or not?

Hai ...do i have to start the engine ?

Cvt j1 can change cvt j4...?

Sir ask ko lang pag ba naka 4k mileage ka na after mo magpalit ng cvt e normal color ba ung tranparent sya pero mejo may pagkabrown pag pinunas mo sa tissue?

lo i just recently changed my transmission fluid however, i was told that since it was a cvt i dont have to change filter :/ is that true

Where did you get the transmission filter?

Is the 2016 Lancer similar

The cvt pan doesn’t need silicone/rtv to seal and it shouldn’t be used

How do use amount of torque ?

Can you reuse gasket?

Boss did you replace the filter with a new one?

Every 40k km ?? Basically all the time right?

So are you gonna change the transmission filter that is on the bottom of the battery I think is call transmission coller filter 🤔

Hoe many quarts did you use

San po kayo nakabili ng transmission filter

Sorry, the torque was 69 in/pounds?

tay fuel filter po sana.

All you have to do is change oil