2017 Ford Fusion SE Rear Brake Pad Replacement

Рет қаралды 48,869

3 жыл бұрын

Пікірлер: 37

@JULITOPLAYS Жыл бұрын

Thank you for this video I was about to drop $500 to have a mechanic fix it but I just searched up all the tools and everything turns out to be under $150 thank you!

@directedbytalon Жыл бұрын

500 to have your brake pads replaced? that mechanic is robbing you

@juantrainsmartnothard3505 2 жыл бұрын

Thank you so much! Saw 2 other videos and no one mentioned rhe special tools. Started the job and had to quit half way. Will rent it tomorrow. Also purchased a kit from Amazon but it arrives on the weekend. Appreciate your thoroughness!

@matthewsetzer9896 9 ай бұрын

Thanks for the video brother ,God bless from Missouri

@rauldavila188 2 жыл бұрын

Thanks for the video really helped me out .👍

@Zizie_sc Жыл бұрын

Dang.. I need one of those piston jigs. Makes the job so much easier.

@andykolbin1783 Жыл бұрын

You don't need that special tool. All you have to do is put electronic brakes into service mode.

@rayjones5157 Жыл бұрын

On my car they still did not retract fully. Had to turn them all the way in

@maxarothdev7374 Жыл бұрын

How do you do this

@waynesalekin6773 Жыл бұрын

Great video. Thank you very much

@rodneybooty4011 Жыл бұрын

Thanks for posting.

@mikeglover7456 3 ай бұрын

You do not need the special tool. All you have to do is put it in maintenance mode on your - and you can push it in as normal.

@jeremysmith4530 Жыл бұрын

Didn't apply grease to guide pins, brake pad ends or back of pad. Isn't it going to squeek a lot?

@tcmautosalesllc7994 Жыл бұрын

It is recommended on this vehicle I did not and 10 miles later no squeaking. Still I would recommend…thanks!

@eddiecooper5986 Ай бұрын

Dont the two indentation on the piston you turned in have to be in a certain alignment

@tcmautosalesllc7994 Ай бұрын

Hi and thanks you would need to research that one but in my experience has not been an issue

@SergioHernandez-yp7hd 2 жыл бұрын

how to disable the rear brakes

@parrishgoodwin9874 4 ай бұрын

Thanks

@mrsamsung8184 9 ай бұрын

Get so many different procedures for doing the rears pads on fusions I try the emergency brake procedure thing in the freaking piston came popping out cuz I wasn't watching what I was doing and I have the toolkit like this but then you get people that say you don't need the toolkit you do it by doing the emergency brake procedure but when I was doing it the Piston was not going in it was coming out

@maxhuerta96 Жыл бұрын

The tools that you got did they come with the dura last gold box or no?

@tcmautosalesllc7994 Жыл бұрын

They were depart , required a deposit and once returned you get full deposit back.

@tcmautosalesllc7994 Ай бұрын

Duralast box only included brake pads and rental kit was separate you pay a deposit and it is refunded when kit is returned

@kylerayk 5 ай бұрын

CaliPer, CaliPer, CaliPer! Caliber is the size of a bullet. Please do tell where the 35mm torque tool is used. What size allen wrench? Inch or metric? So do I just go into Auto Zone and ask for a "rental kit"? Last I checked, they had a whole shelf unit full of "rental kits" for different things...ball joints, universal joints, steering wheel pullers, harmonic balancer pullers, and many others.

@tcmautosalesllc7994 Ай бұрын

Hi yes just ask autozone or parts store for brake caliber kit and they will provide the correct one

@cornerbck38 2 жыл бұрын

45 torq for caliber bolts

@peeepeeepoopooo7541 2 жыл бұрын

When those things rust inside, they're a pain to take off without snapping them

@jayoliver7153 9 ай бұрын

What size hex key? Or Allen wrench?

@matt8863 2 жыл бұрын

You didn't have to put the vehicle in service mode?

@mrsamsung8184 9 ай бұрын

I did the right rear on the exact same car without doing the emergency brake procedure I just had the tool to spin in the calipers and then I went to the left rear and it would not go in all the way ended up having to get a freaking caliper because I saw the procedure for the ebrake and when I was doing it the Piston wasn't going in it was coming out and I was doing this by myself and the next thing you know the Piston came falling out and brake fluid everywhere and I had to get another caliper

@mrsamsung8184 9 ай бұрын

So I guess you can do it either way I don't know why these cars are so freaking complicated I've done hundreds of brake jobs with that tool I've never run into a problem except with a 2015 Fusion SE

@larrywhite-tk7ve 7 ай бұрын

Ok sorry I was rough on ya brother