2020 Land Rover Defender Oil and Filter Change (P400 petrol engine)

Рет қаралды 18,940

3 жыл бұрын

Vacuum extraction method.
Special tools and products needed:
OEM Tools 9.5L (2.5gal) fluid evacuator: www.amazon.com/gp/product/B07...
Pick the 9.5-liter model, as it will be barely big enough to vacuum all the oil from this engine in one shot.
Liqui Moly Special Tec LR (factory approved) 0W-20 motor oil: www.amazon.com/gp/product/B07...
Make sure the letters LR follow the Special Tec name! Liqui Moly manufactures a variety of Special Tec oils specific to other brands, but only Special Tec LR synthetic is approved by JLR for use on this engine. This is very important for any warranty claims (save your receipts!) If you are past the factory warranty period, a high quality synthetic of this same viscosity should be just fine and save you money, especially if your oil change intervals will be way shorter than the Land Rover recommended 21k miles or 2 years.
Oil filter is available from a variety of sources, such as Amazon, eBay, Land Rover dealers. As of this video, I could not find aftermarket alternatives to the OEM, but the filter is not a huge expense whether you go for the genuine article or not.

Пікірлер: 32

@tommystpatrickghost4264 4 күн бұрын

For those of you who are wondering the oil filter cap is a 27/mm wrench. The toque required should be on the cap itself. Recommended oil type should be on the oil cap itself. Thank me later. !!

@dct124 2 жыл бұрын

Thanks for the video, this is just how I change oil on my Mercedes. When you pour the oil, if you turn the container horizontal it will come out smoother and less chance of drip/spill. Eventually you won't need the funnel.

@pnovotny21 2 жыл бұрын

Excellent video. Thank you for taking the time to make it!

@jaymarque6833 Жыл бұрын

Excellent video with just the right amount of detail. I purchased the same extractor on Amazon and just did my first change with zero drops spilled! Thank you.

@handbuiltinengland Жыл бұрын

Amazing video with perfect level of detail. I followed it step by step to change the oil on mine. Thanks so much!

@nicholascohen852 2 жыл бұрын

Really great video. I have the D300, but it all looks exactly the same. Thank you (from Australia).

@brucesnow3506 11 ай бұрын

Thank you Umberto! Nicely done. I needed the education.

@milandjukic3589 2 жыл бұрын

Great video and presentation with those type of service’s and with that type of oil that engine will run and run )) 😃🇬🇧

@dct124 2 жыл бұрын

Big thanks, I'm looking at the 110 to replace my E350. I don't really want a SUV but I do require a 7 seater now and I really like this new truck.

@msanchez7317 2 жыл бұрын

Glad it’s not just my P400 that sounds like a diesel! Tools ordered to change mine. Thanks for sharing. I could only stomach putting about 10-12k on it. No way I’m waiting 20k either

@franckreporter 3 жыл бұрын

bel video umberto!

@theknight45videos Жыл бұрын

Gotta be the Volvo SUV’s with the inline 6. These GM filters aren’t even that bad. You gotta get it from the top/under the hood

@kollisions Жыл бұрын

Would the diesel engine be using the same oil and process? what other service would you recommend for the first 2-5 years? Thanks in advance from Australia!

@user-gu4ld9wz1o 2 ай бұрын

why not measure the pump hose with the dipstick to be sure it was near the bottom of the sump?

@not_the_stig 2 жыл бұрын

How do you reset the service interval?

@HongSoonkyu 3 ай бұрын

May I ask if diesel is same way what you have done?

@rohitsvs1 3 жыл бұрын

Great presentation!👌 What are the benefits of oil change by extraction? 😅

@mr.critic 3 жыл бұрын

Cleaner job for lazy people. Always flush through the pan.

@nopro5433 2 жыл бұрын

What grade octane do you use USA

@tomlee9183 3 жыл бұрын

I have been doing some research on oil for the new Defender and it look like the new Spec is STJLR 03.5006, not 51.5122 which I think its old from 2018 and prior. I am not sure what the diff is but the new LiqiMoly Top Tec 6600 and Castrol Edge fluid Titanium 0w20- EC are the only oils that have this particular approval. I am going to get the same OEM oil pump as you so I don’t have to climb under the car and having to remove all these covers.

@ubonfante 3 жыл бұрын

As of today's date, the specification page in JLR workshop manual for the 2020 Defender P400 here in the US still states the type of motor oil required for the 3-liter I6 Ingenium petrol engine is "SAE 0W-20 oil conforming to Jaguar Land Rover engine oil specification STJLR.51.5122". The owner's manual indicates the other specification... My conclusion is that the two specs are likely interchangeable and both will conform to JLR's requirements, so you should source whichever spec is easier to get in your neck of the woods.

@tomlee9183 3 жыл бұрын

@@ubonfante Just got this back from Castrol today: Castrol EDGE Professional EC 0W-20 replaces Castrol EDGE Professional E 0W-20. Castrol EDGE Professional EC 0W-20 combines the cold climate performance of Castrol EDGE Professional E 0W-20 (STJLR.51.5122 oil spec) and the fuel economy of Castrol EDGE Professional E C5 0W-20 (STJLR.03.5006 oil spec) into one product. Currently Castrol EDGE Professional EC 0W-20 is only available for purchase through Jaguar and Land Rover dealership locations. Castrol EDGE 0W-20 EC (replaces Castrol EDGE 0W-20 E) sold retail in a 1 quart bottle size is also available covering Land Rover STJLR.51.5122 and STJLR.03.5006 oil specifications.

@ubonfante 3 жыл бұрын

@@tomlee9183 Tom, just FYI, there is now a Mobil 1 synthetic oil version that also covers both STJLR.51.5122 and STJLR.03.5006 specifications, it's called Mobil 1 ESP X2 0W-20. You can find it from several sources (so far only in 1-quart bottles), including Amazon. Specifications and approvals: www.mobil.com/en/lubricants/for-personal-vehicles/our-products/products/mobil-1-esp-x2-0w-20/

@pabloconqueso 2 жыл бұрын

@@ubonfante Does the Liqui Moly used in your video cover the new spec? Is there a risk in using it on my 2021 Defender with the P400 engine?

@obykinobi4275 3 жыл бұрын

Thanks for the video. Did you warm the engine prior to the oil extraction?

@ubonfante 3 жыл бұрын

Yes (I think I mentioned it in the video, prior to opening up the hood), engine should be warm and the oil should be allowed to settle for 10-15 minutes or so prior to extraction, so most of it collects at the bottom of the sump and can be vacuumed up. With a "room temperature" engine, you could still extract it, but since the oil viscosity would naturally be a bit thicker (not much with these new thin oils though, they almost feel and look like water out of the jug!), the process would take quite a bit longer.

@earnesthall8886 3 жыл бұрын

How many miles do you have on your defender

@paulhoppe4596 3 жыл бұрын

Great video!! Do you have a link you the oil extractor you use?

@ubonfante 3 жыл бұрын

www.amazon.com/gp/product/B07N7X4TP9/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

@ubonfante 3 жыл бұрын

And this is the identical manual version if you don't care about or can't use the pneumatic / air compressor feature: www.amazon.com/dp/B01BW393E2/ref=emc_b_5_i