A comparison of both stock and Akrapovic, followed by a comprehensive install - would love to hear your thoughts and any requests in the comments below. #2021mt09sp #akrapovicexhaust #racingline
Пікірлер: 98
@Geo_Okami2 жыл бұрын
This is the far best video of installment, relaxed precise and perfectly clear. Thank you so much 🙏
@motobolt77962 жыл бұрын
Glad you found it helpful and thanks for the feedback 😊
@Mekaeshi2 жыл бұрын
Best exhaust replacement Tutorial Ever, what a blast for giving alot of effort making this.
@motobolt77962 жыл бұрын
Love the feedback, hope to keep bringing you helpful content in the future!
@Mekaeshi2 жыл бұрын
@@motobolt7796Thank you, Yes You Do.
@sithu28162 жыл бұрын
This is the best exhaust installment video and clear as diamond , appreciate it.
@milaoloading9 ай бұрын
Appreciate you taking the time to make such a detailed video! I just installed my full system easily thanks to you!
@markwalker66922 жыл бұрын
Best exhaust install video I've seen yet, thank you.
@eyubbardakci15442 жыл бұрын
I installed my akra today with help of this video! Thank you!
@rajeshsingh-wz8fx Жыл бұрын
Hi, just want to let you know that i followed your video to the word and installed my Akrapovic to my brand new MT09SP yesterday. Took me about 3 hours but i must tell you that your video was better than any manual ir instruction booklet. Im not a mechanic or anything but you simplified the installation process so well that i managed to install easily. Can't thank yoy enough fkr sharing. 🙏
@DopeboyDanny Жыл бұрын
What a great video brother. A buddy and I did this install in the middle of the night and it took us about 2 hours. Looking forward to riding the bike and hear it 👏🔥
@floydalcantara87852 жыл бұрын
Nicely done installing your full system Akropovic Racing Line Carbon Exhaust. I like the loud base sound of it.
@jeroenb78813 ай бұрын
Thanks for the detailed video! Just installed mine today🔥
@mikesmith8755 Жыл бұрын
Thanks for this, very detailed and well done installation!
@pattojumpship2 жыл бұрын
Great vid. Easiest way to hold the copper gaskets in place is exhaust paste. A small smear on the back of the gasket will hold it in place whilst getting the headers on and help seal them incase of any corrosion or damage, works a treat.
@CarlooStack Жыл бұрын
Thx bro! Best video out here👍🏼 next month gone buy my mt-09 sp 2023… and want to replace the exhaust my self😎
@toddjames437324 күн бұрын
Absolutely gem guide watching in 2024 well done and ty so much
@dimitrixenos3067Ай бұрын
Thank you for this great video!
@brustar64 Жыл бұрын
Fantastic instructional video! So thorough!
@dge49168 ай бұрын
amazing vidéo !! lot of details thank you for this job 🤟
@SimonasB2 жыл бұрын
Very detailed video, appreciated.
@motobolt77962 жыл бұрын
Thank you, love your feedback 😊
@biagiolaspada8 ай бұрын
Ho installato da poco lo stesso scarico racing con filtro sportivo e mappatura. Adesso è tutta un'altra storia. La moto è completamente cambiata sia a livello estetico che di prestazioni!
@supaxrАй бұрын
Such a great instalation video helps with my anxiety 😅to install one myself
@Ride752 жыл бұрын
Awesome vid mate helped me out👌
@rickyj7692 жыл бұрын
Excellent video, very well done sir.
@quocluong27322 жыл бұрын
cool install video. would be great to create a video of the exhaust sound whilst riding - ripping through the gears and downshifts etc. tunnel run would hurt either 😺
@motobolt77962 жыл бұрын
Just purchased GoPro 10 media mod setup so you get only the best quality, it’s in the pipeline!
@user-rh3zs6ho3t7 күн бұрын
Best video. Thank you 🙏💪
@2muchswag8082 жыл бұрын
Great video. Thank you
@motobolt77962 жыл бұрын
Always a pleasure, thanks!
@racinraymond12 жыл бұрын
Great video nice and slow and you can clearly see how to do the job
@yorkshire1290DUKE-R3 ай бұрын
Great advice, thanks.
@alf7862 жыл бұрын
Mate I needed this video earlier haha I just done mine last night and you posted and it was not on the searches properly till now for me. Great video. I found I had not required to move the rad and used the longer socket to the middle and inner header bolts .. def get a evotech rad guard installed . But thanks 🙏 brilliantly done video. The others do not compare to this video on how to.
@motobolt77962 жыл бұрын
Have you got the 2021? Appreciate the feedback and shame it wasn’t sooner, uninstalled the Akra last night due to popular demand for a ‘how to video’.. reinstalled original, started the vid, took it off and reinstalled the Akra again😅
@alf7862 жыл бұрын
@@motobolt7796 haha nic one bro appreciated the video for sure best how to... now you dont need to undo the rad , if you tilt bike up from front you get better access to the headers with long socket! I managed phew. Yep mines on the 2021 ..
@motobolt77962 жыл бұрын
@@alf786 well done, I see where you managed!Originally when I lined up the top bolts with the extensions they were scratching the paint off the radiator, so went with the other approach to have more freedom of movement and not strip the nuts in the tightening process with the socket on such an angle.. did you have to remove the lower radiator bracket?
@alf7862 жыл бұрын
@@motobolt7796 do not need to remove the rad bolts at all.
@alf7862 жыл бұрын
@@motobolt7796 how do we ever keep the bolts clean and protected from salt and rust that what id like to know
@salvatere8 ай бұрын
Ja best video at KZfaq, thanks
@braverabbit2 жыл бұрын
Very nice well done video!!!
@zokky72 жыл бұрын
nice sound, good video 👍
@motobolt77962 жыл бұрын
Thanks for your feedback🙏
@MinhDev1988 Жыл бұрын
Great videos, I have installed akrapovic exhaust on my bike follow your instruction. Just one question: Did you tightening the header nuts follow the torque in akrapovic manual? They said the torque for these nuts are 22Nm but I'm afraid it will break the maniford bolts.
@chrisscharfenberger60072 жыл бұрын
What an excellent "how to" install video. Thanks for taking the time to do it. I have the exact same exhaust and exact same bike. I'll be putting it on tomorrow and now I know just what to do. Thanks again! How does it run with no tune? Same as it did with stock exhaust?
@chrisscharfenberger60072 жыл бұрын
I got it put on. Your video was SPOT ON PERFECT! I guarantee you saved me an hour or two. Thanks again!!
@alexandrurancavlog6010 Жыл бұрын
Can you do a video comparing the Mv Augusta F3 and the Yamaha Mt09 a side by side I whant to know which one it s more bigger
@jwb49252 жыл бұрын
Great!
@xxy922 Жыл бұрын
sounds cool but previous gen carbon had a lot more pop and cough to it, which I like
@capcohan9312 жыл бұрын
Did you get a tune? Sounds awesome
@frankdux5392 Жыл бұрын
Perfect tuto
@1life2pono2 жыл бұрын
It does sound much better with the new exhaust, but the stock exhaust "hidden" design is one of the reasons I love the 3 gen version of this bike. If only there was a way to de-cat the stock exhaust....
@ethenjordan20102 жыл бұрын
That’s why I got the Yoshi one.
@ac2-rm141 Жыл бұрын
I like the hidden also.
@avrc92852 жыл бұрын
looking good ! any dyno and ecu shenanigans in the near future plans ?
@motobolt77962 жыл бұрын
Yeah as soon as we can get access, not much thanks to Covid keeping everything shut
@rituljoshi74582 жыл бұрын
@@motobolt7796 any updates on the dyno?
@MT10dan882 жыл бұрын
fantastic video. Best one I've seen. Speaks English.👏🏻👏🏻👏🏻None of this American bollocks you get.. about sponsorships or my wife's best friends shoes got lost on a ride out. 20 mins wasted taking shit..Perfect installation video. Nice one thank you.. please come and install mine. seems agro with all the cables etc.. Getting mine new year.. Once again Great 👍🏻
@motobolt77962 жыл бұрын
Love the feedback ahaha you have a solid point! Can’t wait to keep bringing you quality content, where are you located?
@MT10dan882 жыл бұрын
@@motobolt7796 Kent
@antonis87322 жыл бұрын
Hey this is the same installation tutorial for the tracer 9???
@xcrashcore79532 жыл бұрын
Hey! after installing the exhaust, did you adjust the fuel maps?
@motobolt77962 жыл бұрын
No need but will most likely get a power commander later to enhance it, saves messing with the ECU and voiding warranties👍
@milkman37972 жыл бұрын
With the db killer off, does it hurt your ears on the road?
@halitengin5166 Жыл бұрын
Hello is it comes with db killer for long rides?
@jackpistone80152 жыл бұрын
is there any exhaust sliders that fit this bike?
@kodysdad179 ай бұрын
Does the mount for the can come with the exhaust?
@jt3d8676 ай бұрын
How to protect the Akrapovic end can, from accidental tip over
@Add_Username_Here5 ай бұрын
How much would it cost to get this exhaust and have it installed since I wouldn’t be able to do it myself?
@sunnesonne Жыл бұрын
Did you end up tuning it too?
@taiwolawal84715 ай бұрын
Hello,how can I get the 02sensor extender?
@johannilsson3385 Жыл бұрын
How loud is it with DB killer?
@Sunrazor8 ай бұрын
Can't you just leave the sensor where it is routed and just plug it in when the exhaust is in place?
@thegamingkiwi9847 Жыл бұрын
Where do I buy it I can’t find it anywhere
@acosuper Жыл бұрын
Use a copper coat grease not glue.
@MehmetSAHIN-bu9tf2 жыл бұрын
Need remap? Any fault code?
@motobolt77962 жыл бұрын
Just plug and play.. and let the good times roll😊
@RipJawsX952 жыл бұрын
God that is such an inconvenience by Yamaha placing that radiator bracket right infront of the exhaust lol
@povilaslondon2 жыл бұрын
does it shoot flames?
@motobolt77962 жыл бұрын
Yeah mainly on gearchanges and downshifting but not as much as shorter cans I’ve had in the past
@povilaslondon2 жыл бұрын
@@motobolt7796 Nice, I'm waiting to see what Black Widow will produce for this bike. I've been told they are realising it on December. Can't wait to get rid of that stock exhaust :D
@motobolt77962 жыл бұрын
@@povilaslondon they’ve been great with the previous gen and well priced, but hopefully a little more aesthetic! I’m watching for what Austin Racing bring to the party, love the design and finish on their cans. Shame there’s such limited choice for now and bet you can’t wait to hear that music to the ears!
@povilaslondon2 жыл бұрын
@@motobolt7796 true, the only thing I don't like about Austin Racing is that you need to destroy your oem exhaust in order to fit it. Also for almost a slip on they are way too expensive
@motobolt77962 жыл бұрын
@@povilaslondon very true, good point! Although I did hear rumours they’re making a full system for the 2021 MT09.. hopeful as they’ve just brought out a twin can full system for KTM 890 and 1290 Duke’s which sound insane!
@konohamaru98122 жыл бұрын
Is that a full exhaust?
@motobolt77962 жыл бұрын
Yeah full Akrapovic Racing Line Carbon system👍
@steveholden45442 жыл бұрын
It's really hard to tell if it's a full exhaust, maybe he spent hours pulling the headers off and the entire exhaust system apart just to install a slip-on can
@alf7862 жыл бұрын
@@steveholden4544 🤣🤣🤣
@redhotbim2 жыл бұрын
man you should get paid for that!
@RomelSinahan2 жыл бұрын
How much wieght you lose??
@motobolt77962 жыл бұрын
A Weight Reduction of : 2.6Kg Power Gain : 4.5HP (3.3kW) at 9600 rpm Torque Gain : 3.4Nm at 9600 rpm
@RomelSinahan2 жыл бұрын
@@motobolt7796 nice gain in power ...wow 🤯🤯🤯... keep safe always 👌👌👌🙏🙏🙏
@holden486 Жыл бұрын
@@RomelSinahan unfortunately he's now passed away :(
@RomelSinahan Жыл бұрын
@@holden486 Sory to hear that ...condolence.. ride in peace 😢