I purchased these a few days ago after watching this video. I just got done installing them, and this video made it super easy. They look awesome! Thanks!
@z1off-road2 ай бұрын
Great to hear!
@f5fstop2 ай бұрын
They look good when installed and on. However, a few notations.... Ended up installing the fuse to fuse 45, 10A located on the other end of that short row of fuses from the ABS module used in this video. It is immediately under the 15A (blue) fuse at the other end of the row. (You can see the blue 15A when he is plugging in the fuse at 15:21. This fuse is hot when the ignition is ON or START. And the fuse holder fits better. (I would add a photo but not sure how to post to this comment!) On my '23 there are a total of five T15 torx screws that need to be removed. Two torx screws on each side. Inner is for the plastic cover, outer may just be for the grill. However, I removed the two on each side just in case; not that hard. Also there is another torx screw in the middle just to the right of the hood latch; looking at it from the front of the vehicle. Forget those tiny tie straps. I used 3.5" black straps and they were hard enough to get locked; cannot imagine trying to use the small ones that came with the kit; at least after the lights were installed. Even though I did NOT remove the grill, it was a pain to align back up with all the locator locking pins and it appears both sides need to be pushed in at the same time. Or at least that is what I found on my vehicle. Also those six push pins, along with where that plastic cover attaches to the grill really hold that grill in place more than the side pins. Overall, not a hard install if you have all the right tools. At least you can do it all standing up.
@maine-lygamingtips20392 ай бұрын
Remove torx screw...the size would be nice info to share. Just a suggestion, but it's always good practice to connect everything together and test it to make sure everything works before installing any of the parts.
@z1off-road2 ай бұрын
The torx size is T15
@mrrogers072 ай бұрын
Those lights look great. I know you guys want to get the super charger right but dude, when are we going to get some more info on it? Me wants!
@mystixxmusic19 күн бұрын
Will those lights fit the Nissan Titan? The grille looks the same size slots.
@PRO4XKEV2 ай бұрын
I installed this today on my 2023 P4X. It was easy, however I did one thing different, I removed the shutter assembly to make it easier, that was easy to remove. I removed the Grille to, along with the hood latch assembly. Re Assembly was easy, I also trimmed that rubber strip on shutter assembly that rubber was pressing so hard on the lights and wiring, I took a sharp blade carpenter knife and sliced 5/16 off it entire length, now it fits just right. And THANK YOU for a Awesome quality product. One question.. in the future if a light burns out can a single light be purchased>?
@z1off-road2 ай бұрын
We are always here to support in anyway we can. Just reach out to the team.
@tonyj95022 ай бұрын
I need a good hood decal installed video?
@Thisthat123414 күн бұрын
White LED option coming soon?
@MAYH3M78212 күн бұрын
what about the Titan? Such a huge market!!! You guys could capitalize on the titan market!!!!
@3RAN7ON2 ай бұрын
0:32 I see that smile after saying Deez Nuts 😂
@danielmclinn596315 күн бұрын
Don’t like the color of these lights. Look bad at night. Do they come in other colors?
@f5fstop2 ай бұрын
I would guess he means "orange Permatex," since Loctite is a brand name and don't believe they make an "orange" threadlocker. However, I would most likely use 'blue."
@IronJoe2 ай бұрын
Those are markers lights and you should tap on the markers fuse. Not ABS
@f5fstop2 ай бұрын
I installed as shown in the video to the ABS module 10A fuse. Might be moving. UPDATE: Changed location to the backup light circuit, hot with ignition Start and On. 10A fuse 45. It is located in the same row as the one shown in the video but other end of that row, immediately following the 15A fuse.
@omarroyval97372 ай бұрын
Huh!? W one!?
@IronJoeАй бұрын
@@omarroyval9737 the fuse marked “markers” under the hood
@markt54502 ай бұрын
Dee’s nuts😂
@garym511242 ай бұрын
The other kit the lights just snap in...much easier to do
@demixy232 ай бұрын
And cheaper!
@MusicManiac9312 ай бұрын
Those other kits look like shit though. You get what you pay for.
@demixy232 ай бұрын
@MusicManiac931 That's purely your opinion bud. Mine looks amazing, and I paid 40$ for it on amazon. I've gotten countless compliments on it. It's about the installer and doing it right.
@garym511242 ай бұрын
@MusicManiac931 lol follow the angle of the grill...keep the lights looking uniform. No one is judging you for spending more do ya thing
@demixy232 ай бұрын
@@garym51124 Exactly! 💯
@TheSouthPawАй бұрын
Please make em in yellow
@sicsematic2 ай бұрын
Is that a new cold air intake tube Z1 is working on? I have the cold air intake from Z1 but it's a matte black tube, not that carbon fiber looking tube in that's truck.
@z1off-road2 ай бұрын
The carbon is for the supercharger kit, but if enough people start asking for it... maybe.
@goulartaf662 ай бұрын
Did you already post a video on the supercharger install?
@z1off-road2 ай бұрын
No we have not, this one is still the prototype. Once we have the full kit ready for sale we will post one.
@9MilNorm2 ай бұрын
What lift is that? Stance is tough
@z1off-road2 ай бұрын
It is our titan swap kit with Radflo 2.0s and a 2" body lift.
@goulartaf662 ай бұрын
Do you not have any rubber mat so you can put on top of the table to protect your body part on?
@FrontierOffroad2 ай бұрын
Who can I have install these on mine?
@z1off-road2 ай бұрын
We have an authorized installer network listed at the bottom of the home page, but this install is very simple so almost anyone should be able to do it for you.
@johnnymathes5215Ай бұрын
please find a new video editor
@normanlapierre142Ай бұрын
Grill Lights for 2022 2023 2024 Nissan Frontier Raptor Lights LED Grill Lights Front Grille Light for Frontier 3rd Gen Accessories PRO 4X S SV PRO X, Amber Lights B0CSFZNDR8 i got these of amazon they were allot easier and fit great you pushed them in from outside the grill and they snaped in
@UncleFjester2 ай бұрын
2025 Ranger Raptor Doesn't even have these Cosplay Lights. If your not driving a full sized Raptor its all Cosplay and we Know it!