Hi Guys, I installed a bunch of new goodies on the Grom and gave it a test ride. Tell me what you think! toce exhaust toceperformance.com/honda-gro...
Пікірлер: 81
@phillythakid Жыл бұрын
Might wanna recheck that valve lash brother. It’s sounding a little chattery on the vid.
@kimyeahph Жыл бұрын
😍🏍️ be safe on the road!
@Matt_Yniguez Жыл бұрын
Always 😊
@usmcmsgt54874 ай бұрын
I'm looking forward to doing pretty much the same thing.
@jeremypierce197911 ай бұрын
Do you want the baffles removed? I have a Vance and Hines exhaust on my grom to be heard from people, so you don’t get run over wear earplugs in your helmet if it’s too loud, that helps
@bikebilderbear67867 ай бұрын
Pretty cool video. I'm topping out at 70mph with my 2021 boom vader clone 4 speed. I did add pwk power jet carburetor Z40 cam and springs/ Ported and grooved the head / Hand made header tube to high performance canister with a 17t. You got a sweet bike there.
@Matt_Yniguez7 ай бұрын
Sick! Thanks a lot!
@ilyxuan_ Жыл бұрын
can you do a parts list w/ links
@hartfordraces Жыл бұрын
I'm planning on getting a grom. Can't decide sf or new one. Ps nice ep3. Got a black one as well. K24 turbo. Just got her running the other day
@Matt_Yniguez Жыл бұрын
I'd say new. They're cheap even for a brand new bike! And nice car!
@2SlickNick Жыл бұрын
Nice! It almost looks like you’re out in Arizona. I’m waiting to install my intake, and waiting on my ECU to arrive in the mail. I’m gonna run it with just intake, exhaust, and ECU then see where I’m at. And I imagine I’ll be going for that camshaft next. Good video.
@Matt_Yniguez Жыл бұрын
I'm actually in the high desert in Cali. That's a good combo to start with!
@Dragonstorm1557GAMING9 ай бұрын
Hi there, I'm looking at getting my ecu tuned for my 2023 grom I've got a kemimoto exhaust and I'm planning on installing a k&n ha-1222 air filter. Curious to know how your doing!
@2SlickNick9 ай бұрын
@@Dragonstorm1557GAMING mine is doing great. Tune ECU is worth it. And the intake and exhaust. I end up putting a 39 tooth rear sprocket on, now it lets my RPMs hit almost 9000, TopSpeed has increased and so has to torque
@1981menso23 күн бұрын
@@Matt_Yniguez Apple Valley is my guess.
@outbackdiecast6730 Жыл бұрын
I love it man I got the same exact bike. Definitely didn't buy it for speed but I wish I could go 70 at times. I top out about 64 stock
@Matt_Yniguez Жыл бұрын
64 is still fast for a grom!
@MrZachgonz11 ай бұрын
I’m at 62mph on flat ground with my SF Grom. I weigh 230 though so that’s probably why.
@matthewbabcock222111 ай бұрын
I also just bought one but I already have some experience with groms, I specifically bought mine as a fun little get to work and back type deal and if your behind a car you can use them to your advantage to get up to 76 or so mine’s completely stock and I hit 76 on the way home from using a cars wind draft
@ChewyVang Жыл бұрын
My gps tracker on my phone clocked stock sprockets and everything all stock to be 1-2 mph less than what the speedo says. With 14t front sprocket at 45mph it reads 5 mph less and at 56 it reads 6 mph less. I'm assuming at 70 you're probably 7mph slower than what the speedo says
@gilmayniguez174611 ай бұрын
Nice Mat
@remyche876810 ай бұрын
Hey grom folks, I have stage 1 flash, for exhaust and intake, and putting a dhm cam,.should it be fine to ride till I get some else?
@onlysnaps692 ай бұрын
recheck your valve spec like philly said shes tickin real loud
@AttentionClouds10 ай бұрын
Do you have the links to the parts?
@baldbeardedx Жыл бұрын
Stock can be off 4-5 at 60. Dropping a tooth your probably less 6/7 at 60
@asheredwards95065 ай бұрын
my grom topped out at 78 mph 9200 rpm in 5th downhill all stock. went to 13/41 sprockets and top out at 72
@Rayan-rw3gt2 ай бұрын
what do sprockets do?
@asheredwards95062 ай бұрын
@@Rayan-rw3gt they are the final drive. like on a bicycle different sized sprockets (gears) change the amount of power rotations to wheel rotations.
@christopherbassit6896Ай бұрын
Stock I went 81 and bounced 5th down a hill. My friend too
@julianchong39124 ай бұрын
Question if I don’t want to waste to much or do it much to my grom Do you think the Yoshimura exhaust rs9-t, dhm performance ecu flash, and chimera air intake is enough? If so would I need to do anything to the grom by adding these parts ?
@ghettosled1976Ай бұрын
They’re all easy jobs and will get you having plenty of fun. Honestly if you’re going to do those, get the cam right away and the flash that goes with it. It’s not super hard and it was the biggest gain I noticed on mine.
@2SlickNick Жыл бұрын
I’m pretty sure your speed is accurate, it’s when you change the wheel size, that that should make a difference because your speedometer is in the wheel.
@Matt_Yniguez Жыл бұрын
Gotcha! Thanks for the info brother 👍
@2SlickNick Жыл бұрын
@@Matt_Yniguez 💪🏽
@2SlickNick Жыл бұрын
@@Matt_Yniguez OK I just learned something new, I was informed that on the Honda Gramz, that your speed sensor is actually in the crank case or something like that, so it’s not the front wheel. So apparently you have to purchase some kind of plug-in play system to accommodate for change in gear ratio.
@MrPond-xp6dl9 ай бұрын
Mine is always reads 2 over when I go past a radar
@jeremypierce197911 ай бұрын
If I was you, I’d get rid of that chimera intake and go with a man in the box and take it so much cleaner luck doesn’t have that wire that could short out a lot of people put it on those newer models check it out
@Matt_Yniguez11 ай бұрын
I'll check it out thanks! 👍
@Back.yard.stunts11 ай бұрын
all I want to do to mine is ecu flash, exhaust, intake and sprockets. Is there anything wrong with that? Do I have to do all the internals to make it safe or am I good with previously stated mods?
@Matt_Yniguez11 ай бұрын
Those mods are good enough 👍
@Back.yard.stunts9 ай бұрын
@@Matt_Yniguez thanks for the reply bro!
@droneartists61375 ай бұрын
I dont think the speed is displayed exactly anymore when inserting the 14t sprocket, so your reading is off bro
@David-nv8vu2 ай бұрын
By the sound of it, you may need heavier clutch springs .
@ghettosled1976Ай бұрын
It’s his terrible shifting ability lol.
@BigBoyzToyz1974Ай бұрын
You change gear a little strange 😅 it like you don't let the throttle off a slip the clutch
@357bkg3 ай бұрын
I know it’s late but u need stiffer clutch springs
@user-yi7my5df5t3 ай бұрын
yes he does need that
@PrelandRangerАй бұрын
What exhaust are you running man?
@Matt_YniguezАй бұрын
Toce
@User-kb1tq Жыл бұрын
Do they ship to Europe too or usa only??
@Matt_Yniguez Жыл бұрын
I'm not positive, but I think they do! Give them a look dhmotoring.com
@mariohernandez67335 күн бұрын
Can you install that exhaust without that wheelie bar ?
@Matt_Yniguez5 күн бұрын
Yes
@sethsimmons66382 ай бұрын
You do not need to slip the clutch on every shift like that man! You are going to burn your clutch out prematurely riding like that if you haven't already. You only need to slip the clutch to take off from a stop, you can actually just let off the throttle for a split second and upshifts without using the clutch, it's smoother and easier in the trans/chain/sprockets
@mikebaker252210 ай бұрын
How did this affect you mpg?
@ghettosled1976Ай бұрын
I have the same cam and flash with intake and exhaust as well as the 14t and I’m still around 105 miles per gallon and I’m 230lbs. I was surprised. Thought it would at least drop to 90
@dqitwithbrad9 ай бұрын
why would i made my grom not stock just to gain 4mph? I get 70mph on the highway totally stock except a exhaust
@baseballfanatic1109 ай бұрын
If I get exhaust and air intake will I need to tune it?
@Matt_Yniguez9 ай бұрын
You don't NEED to, but it's highly recommended to.
@lavishlex11 ай бұрын
Can you run a mid faring with that air intake?
@Matt_Yniguez11 ай бұрын
I've looked into it and I don't think so tbh
@lavishlex11 ай бұрын
@@Matt_Yniguez would you have to cut the mid faring or would it not fit at all
@Matt_Yniguez11 ай бұрын
@lavishlex the fairing isn't what's in the way, its the air intake
@tws57729 ай бұрын
are these mods allowed in your country?
@nickkolczynskitattoo4865Ай бұрын
This is America we can do what we want
@user-np8cg9lx5c4 ай бұрын
Leave your change abit longer lol
@lKanyoNl7 ай бұрын
What phone mount are you using?
@Matt_Yniguez7 ай бұрын
In this video, I was using the Samsung Galaxy Z Fold 2
@lKanyoNl7 ай бұрын
@@Matt_Yniguez I’m sorry bro the mount you where using to hold your phone to the bars
@Matt_Yniguez7 ай бұрын
@@lKanyoNl Quad lock. I made a video about it on my channel
@jincqx97213 ай бұрын
valves r loose mate
@tonyromo4778Ай бұрын
You probably going 58 14t sprocket is off by 7 or 8 mph unless you have speedo healer
@Matt_YniguezАй бұрын
Don't you mean 68* then?
@tonyromo4778Ай бұрын
I had the 14 t, and I was over 7 or 8 mph on my gps
@bostoncuocsongmy6145Ай бұрын
How i can bye ecu
@Matt_YniguezАй бұрын
Dhmotoring.com
@jonathanscott44922 ай бұрын
Valve chatter
@888jackflash7 ай бұрын
Dood.... either you are slipping that clutch waaay too much or it is TOASTED
@Nikbush0236 ай бұрын
He’s power shifting, meaning he’s not letting the throttle go before shifting, which will tear his clutch up
@obscorbin47823 ай бұрын
@@Nikbush023😂 that’s what I was gonna say, had to click off the video I couldn’t stand to listen to that poor clutch anymore