For my loads I did the same and bought 1,000 rounds Starline brass. I was tired of the inconsistent results using recycled brass. This way I could establish a good baseline and it's worked out very well.

2nd for n133, it holds the 200yd benchrest record. N133 and 53 V-max is my go to prairie dog load.

If you have a 308 the tac works real nice in that good accuracy haven't chronograph it but well under inch groups consistently 168 Sierra match Lapua brass small rifle primer AR Federal 42.8 gr always liked your videos Logan real world 🌎

Switched from LC brass to Starlinenand was 100% worth it. Just got a 7mm-08 myself.

You're way low on your TAC loads and you're definitely over gassed. I would work up to Ramshots 556 data. I shoot 26.2 for my 55 gr pills in my 3 5.56s and .223. As with most ball powders, it really tightens up when you get to your rifles max. It's Very accurate. I also like H322. It does surprisingly great with 69 and 77 SMKs. Love the 7-08

Too Funny. I just loaded (ladder) the same bullet with H332 using WSR primers for a Savage Model 12 w/ SS 26" BBL 1:9T. Hopefully I can get it out to the range next week. It loves the 62gr Federal Bonded Bear Claws using Varget (.454" consistently @100 yds). Great job on the video!

Good shooting. I enjoyed the video and will be happy to see more. 7-08 seems like a good little round even though I’ve never had one. A day at the range is always a good day.

n133 is where its at, try a pound when you can. 3,500+ with ease in my 26” remington 700 with the 53’s

Thanks for the info...

Thanks for sharing. Nice content

Do you ever check case capacity between different brass with water? Can't wait to see the 7-08. Was thinking of picking up a 7-08 or 260 barrel for my savage 308

Great content - Wondering if you might be working up more 53g V-Max loads? I am starting to load these and was going to start with IMR 8208 XBR, Hope to see some more loads with this projectile.

I love the videos brother. Wanted to say when you said I'm using 4 tenth increments cause it's easier to read when you write on the case. I prefer to have a 50 round box and move let to right with the charge weights then always have a gap of course between the different powders being used. I do it this way and label them too because idk if it's just me but I can't stand writing on the damn cases, always looks like shit no matter what I do!😂

If I could only have 5 powders- TAC would be one

While S D’s are important for long range shooting, don’t lose sight of the fact that even with a large SD, the higher Tac load shot well. For short range work with the 53 grain VMAX that target is more important than that SD..

.... using 23.1grn of H322 behind a 69grn SMK in 1:9, 22" bolt and 1/3" @100 and SubMoA to 500 yards. I have N133 to try but 69grn might be too heavy to get the velocities over 2800?

7mm-08 is a cool option!

I want to ask u somthing im from México sorry if my english is bad i have a Bolt Action Sabatti 223 1:8 twist 26 inch barrel and im only ably to get factory ammo with 55grains Aguila Ammo is it ok tu use it on the rifle i will be happy is u help me with that or what do u suggest

Well, when I did load analysis on .223 with Varget I went with.2 grain increments and got my SD down to 3 with 69 gr TMK's. So I'm not so sure your rifle "likes" that load. .Also, I got with a bag or lead sled when doing analysis...removes me from the equation as much as possible on the groupings.

Work your own data, but 28.2 of 2000mr is awesome with 53 vmax in my guns!! H335 Isnt bad either, followed by benchmark. Ive got 50's & 53's loaded up for pfogs in 2 weeks! 2000mr is also awesome in my valkyries with 50's & 53's. Power pro varmint is better but havent seen that powder in well over a year!!??

Sometimes wiping your powder tray with a anti static fabric softener dryer sheet helps with the static cling and other components that come into contact with the powder the only powder I ever use for 62gr bullets in .224 Valkyrie, 40-77gr .223/5.56, 87-108gr 6mm ARC, .308 150-168gr is Shooters world match rifle powder it shoots sub MOA in all my rifles at fast velocities for caliber and barrel length when it comes to.223/5.56 American eagle WCC LC FC PPU WIN IMI brass all group sub moa in my Ruger AR556 and my 20” varmint build with a Wilson Combat super sniper fluted w/ target crown barrel best .223 Wylde AR barrels JMO I did load up some 77gr TMK W/ Shooters World Precision Rifle powder once with LC brass and Fed premium AR match primers and shot a 1/2” group from 320 yds I took a picture of

Tac for me is for 65 grain and up in 556

H322 and 55gr vmax shoot about as good as i can (just under 1 moa) in my ar15

Great content. Me personally i cant stand ramshot tac, i had horrible luck with it it goes from mild to wild way to easily. Also had good groups with the ,53 vmax but it did not perform as well on coyotes as a 50 grain vmax did. Id take the 50s over the 53s any day inside of 500 yards. Maybe even further.

😎🤌🏻🇺🇸

overgassed for sure. Looks like your ejection pattern is at 2 o'clock. Should be 4:30 to 5 o'clock

No comparison. H322 is wayyyy better than tac! Tac is hot trash

There is NO such thing as 5.56 or .223 brass they are the same thing besides NATO brass have crimped/sealed primers. Otherwise nothing. You have ALOT of learning to do

Sample size might lead to inaccurate conclusions about group size and "fliers"

An auto powder measuring device is not reliable enough to do any testing, for accuracy. END OF DISCUSSION. might be ok for preliminary pressure testing, but that's it.