Very nice...about to build out a 7mm PRC bench/hunting rig myself...trying to decide what action but loving Bartlein for barrels.

I picked up a 7 PRC a couple months ago. I’ve only shot it a few times but it’s a sweet cartridge. I’m wondering if I should have gone with the 300 PRC but I’m not sure. I also have a 338 Lapua that I shoot long distance.

300prc 1.33 moa group and 0.7 moa for the 7 prc. Nice shooting man !!

You should reach out to Texas Plinker with that second grouping! His 1 MOA at 1000 would be attainable with that grouping!

7mm prc isn't no joke i can shoot 1.5 inch groups at 300 yrds with a factory rifle most accurate cartridge i have ever shot and they are not picky they will shoot almost anything

I love your video Can you please tell me: 1)Your barrel length? 2)What powder you use and what is the weight of the powder for Berger Hybrid 184 grains?

Nice rigs

Man berger bullets are just good. They seem to be quite a bit more accurate than the hornady or smks etc. Are you able to load up any bergers in the 300 prc and shoot a group?

You should try a 300 WSM with the 230 Atip. I ran H1000 with a full case with an SD-3fps and 2748fps….routinely shot (in no wind) 10 inch groups or better at 1000. Most of the time we just shot clay pigeons with it at that distance.

I have four 7PRCs - love them. I considered a 300PRC but chose to get a modified reamer made by JGS in 300WSM. I followed the Alex Wheeler concept and how he improved the PRCs with a larger body by 0.002 and a bit more freebore. My 300WSMs will need long actions but that's what I wanted. the 300WSM is well known for its accuracy. I've got 180, 190, 210 grain bullets with the heavier bullets being Berger VLDs.

The 250 gn a tips is more consistent at longer ranges than the 230 a tips in vertical spreadding

I just won my first 7 prc at a sportsman expo here in Utah. Can’t wait to buy a scope for it, any suggestions for scopes

I have not had any luck with the 230gr stops across 4 rifles. I would have loved to see 190gr berger in the 300prc close to what you used in the 7mm. I can't even get the 225 eldm to shoot but they are better in my trials. 200gr hammers

I have the vortex SE on an rpr 6.5 with a proof barrel, the scope is super viable at 1k. Really like ebr7c reticle. I'm starting a christchensen 300prc build. Do you have any feedback good or bad regarding that action.

👍🏻👍🏻

Have you tried the lighter A-tips? For the 300?

How is recoil? I kinda had my heart set on a 7prc to use in a carbon fiber stock for hinting, suppressed, and switch into a chassis for the off-season for long range. I currently shoot a 6.5 creedmoor bolt and 308 gas gun. People have said the 300 prc is more but a softer recoil impulse than the harsher 7prc. Like 45 to 40 or so. What do you think side by side

Nice video man! I really don't even know why they made the 300 prc.. the 7prc is so much better of a cartridge

Which one are you more confident with?

It sure don't take it long to get there I know that 😅

Hi, you are getting velocity of 2950 fp/s with 28" barrel, 184 grains bullet and 66.5 grains of H1000 powder. Can you please tell me: 1) what is the pressure in psi that you are getting? 2)do you think that in 7mm PRC with 26" barrel, Berger 180 grains, 67.5 grains of H1000 powder I would get velocity of 3000 fp/s and would the pressure be to high and what would be the amount? Best regards!

You are either shooting bergers, or getting beat by someone who is. Lol

Useless comparison. 2 different bullet designs, totally 52 gr difference in weight, 2 different velocities, 2 different rifles. Kudos to you for good shooting, that's about the best I can say about wasting my time on this video.