3025D with 3 section drag

No video

3025D with 3 section drag

Рет қаралды 4,001

2 жыл бұрын

Tried pulling a 3 section drag and it does ok. It is a little big but it does work. Still impressed with what this little tractor can do. I think i might the drag apart and make a cultivator or something more useful for my tractor. Figured out how to move dirt around more with the disc to help. Probably need to start spraying the grass before I start working it to reduce time working the ground with the way fuel prices are.

Пікірлер: 14

@dannymckinsey208 2 жыл бұрын

Good for you, Randy! If it works for you, then it’s GOOD! Just keep at it, and I’ll keep watching and learning. I’m thinking this will be my tractor…

@jackgraham3393 9 ай бұрын

Know this is a year old, but that implement in this part of the country is known as a spring tooth harrow.

@morganhasse9907 2 жыл бұрын

Old chisel plow. Set the hight up to where you still turn dirt but can work through the vegetation without bogging down. Make several passes. Try cross cutting your plot.

@rsmstuff3178 2 жыл бұрын

Thanks

@livewithnick 2 жыл бұрын

I always pull implements like that in low range. Ag tires would work better also.

@rsmstuff3178 2 жыл бұрын

I agree

@donaldstrishock3923 Жыл бұрын

Its a GEAR DRIVE ; No " hydro-slack-howl-o-slip-o-matic. Just a LOT of GO Power.

@mark46428 7 ай бұрын

should have used a mold board plow and then a disc, you got too much residue

@martyh299 2 жыл бұрын

Randy, just curious. Where is your 3025D made? Can you take a picture of your serial number plate and post it? Getting so many different answers. Thank you in advance!

@rsmstuff3178 2 жыл бұрын

I will get a picture of the serial plate when I get back. It should be around 6/20.

@rsmstuff3178 2 жыл бұрын

I can’t add a picture to this but the tag has Made in India under the serial number.

@martyh299 2 жыл бұрын

@@rsmstuff3178 thank you Randy!

@mark46428 7 ай бұрын

3rd gear high range you are just invited shit to break slow down