3D Printer Raspberry Pi alternative

3D Printer Raspberry Pi alternative | Beagle Camera Review

Рет қаралды 1,486

Күн бұрын

This is the easiest way to add Wi-Fi connectivity and remote app support to a 3D Printer, but is it the right choice for your printer?
Beagle Camera: amzn.to/3yUjv3p
Printer Compatibility List: www.3dprinteraccessories.shop...
Patreon Support: / jjshankles
Support me on KZfaq: / @jjshankles
The Beagle camera really was easy to get setup and configured. This would be an easy setup for someone who doesn't want to go through the raspberry pi setup of Octoprint. It also may be a good alternative since raspberry pi computers are sold out everywhere recently.
The biggest downside to the Beagle Camera is video quality. While it does create easy time lapses, they aren't the quality I was hoping to be included in future videos. I'll need to use a higher quality webcam or dslr to get some really good timelapses that I would want to post.
The gear I use:
3D Printer: amzn.to/3mpSBeZ
Polymaker Filaments: us.polymaker.com/products/pol...
Main Camera: amzn.to/2RNpEbV
Nifty 50 Lens: amzn.to/2Ls60ky
Sharpest Wide Lens: amzn.to/2XOj1v8
Telephoto Nikon Beast: amzn.to/2xqSUvz
Favorite Not RODE Mic: amzn.to/2C4W0se
Perfectly Smooth Gimbal: amzn.to/2MXBCgr
Camera Strap: amzn.to/2rvGtMd
Atomos Ninja V Recorder: amzn.to/2FL03LO
Affordable Studio Light: amzn.to/2rzdAic
Drone: amzn.to/2EgitUT
Great Camera Bag: amzn.to/2UykJg1
💼 Business Inquires : goattoaster9@gmail.com
#3dprinting #diy #3dprinter
00:00 Introduction
00:59 Unboxing
02:20 Setup
05:22 Cons
08:01 Who is this for?

Пікірлер: 8

@ChazBword 2 жыл бұрын

JJ coming in with another amazing tip. Thanks for the great content JJ.

@engineerable Жыл бұрын

Thanks for review! Too bad the timelapse quality is not great, because that's all I would need it for.

@brants7131 Жыл бұрын

I own 4 of these. 1 at first... a quick follow up...then 2 more. (11 printers... a few to go.) Even works on my Delta's! Most ALL of my printers are NOT on their list. But they ALL Work. Tenlog, Hictop IDEX's, Anycubic Linear Kossel Plus, D-Bot, etc etc. Prusa has issues that they are working on. But really, it just passes GCode onto the printer as if you were sending GCode from your computer. Just change bed size for POSING. FLSun SuperRacer was what I chose for my Deltas. Bed size didn't even matter as it almost sets to middle for Pose/Picture. Anyway, LOVE this camera. Pose time is literally 2 seconds per layer. Not much added, honestly. 200mm print, I did, was 1000 layers at .2 and 40% infill. Was a 1 day 19 hour print. what's 33 minutes extra matter? (1000 * 2 seconds / 60)

@JJShankles Жыл бұрын

How did you get it setup on the IDEX? Dual color time lapses would be so cool to get working on my IDEX.

@brants7131 Жыл бұрын

@@JJShankles Just sliced normally and uploaded it to the Camera. Just made the camera think it was a CR10 @ 300x300 or 220x220 (depending on which printer I'm using) and presto bango... it works

@brants7131 Жыл бұрын

@@JJShankles kzfaq.info/get/bejne/jbCPkrefr7avnYU.html

@JJShankles Жыл бұрын

That's awesome, I'll try that out

@dennysawyer3980 2 жыл бұрын

It's pretty cool, and easy to set up, but at 80 bucks for mediocre video quality, I'd stick with OctoPrint. Or use an old smart phone with Octo4a installed. If you're not gonna do timelapses, the Beagle is a decent choice.