3DSets fully 3D printed 4wd Van short trail run

Рет қаралды 1,964

8 ай бұрын

Just a little trail run in my backyard's "trails" with my 3Dsets MaxVan 4x4 by 3Dsets. Using the brushed 540 motor, geared printed gearbox, "locked" axles front and rear, and my own LED system that uses an Arduino Nano as a controller for turn signals, brake lights and reverse lights based on the controller's input. (senses channel 1 and 2 PWM output)
The tires kept coming off the wheels, I have fixed that by adding some stiffer foam and some bead-lock style rings inside the wheels.
Link to get your own van! (Disclaimer: I am not sponsored at all by anyone yet, but everyone always asks for the STLs, so here ya go!)
3dsets.com/product/model-15-m...
Let me know in the comments if you would like to see more videos about these printed RC's, either the finished models, or maybe a full build video!

Пікірлер: 16

@Evilslayer73 5 ай бұрын

Beautifull retro model i love it :)

@BDudasProductions 5 ай бұрын

😮 very cool!

@chrisb5986 7 ай бұрын

Very nice scale build.

@chrystinewestphal9589 8 ай бұрын

so real

@rccrawlerale-hop9871 7 ай бұрын

Wooow a tope crack 💪

@lancephelps4871 5 ай бұрын

Very nice build how long did it take to print? Also is this PLA or PETG? Thanks. I am new to this. If you have any other videos or how to's please let me know.

@ratty2austin 5 ай бұрын

This one is printed in IIIDmax PLA+, I think it was a week or 2 for printing time? I will be making some more videos about these builds, soon.

@radomilkvetny 3 ай бұрын

Hello, great work. Please what tyres/insets you used? It seems to handle the weight of the model very well.

@ratty2austin 2 ай бұрын

The tires are "HobbyPark Rubber 98mm 1.9" from amazon, which are pretty soft, and the foams that are included are too soft too. I used very dense packaging foam that I cut out and installed to make them hold the weight of the van. I think the best option would be to get the TPU inserts that are adjustable stiffness (depending on perimeters, infill and shore hardness) but those need to be designed and sized precisely to fit each tire brand.

@uwebultmann4469 6 ай бұрын

Hello, nice build. It is very good looking. Wich ESP do you use ? Greatings from Germany. UB

@ratty2austin 6 ай бұрын

On this model I am using the Traxxas XL5 ESC, (it was a spare from another car) But in my other 3Dsets vehicles I use the Hobbywing Quicrun 1080 Brushed or the Hobbywing Quicrun 16BL30 for my brushless models

@uwebultmann4469 6 ай бұрын

@@ratty2austin Hello, and thanks for the Information. In other Car I use bigger, larger ESPs. This is my first try with 3Dsets. 😀

@LewisDavidson 7 ай бұрын

Excellent work! Did u paint it, or was it printed in color?

@ratty2austin 7 ай бұрын

This one is printed in color, no paint!

@CineZoneYT 7 ай бұрын

How did you get the lights?

@ratty2austin 7 ай бұрын

I added them myself, using basic LEDs (3mm and 5mm for all but the headlights, 3W high power LED chips with intergrated aluminum plate for the headlights) I soldered wires to them, added small DIY circuit boards at each end with resistors for each LED, and then connected all of them to a central Arduino Nano MCU, which uses the CH1 and CH2 signal to determine if turn signals, brake or reverse lights are needed.