👇WeldTube Store👇 www.weldlife.com

I swear I learn more from videos like this than anything I'm shown in school.

It amazes me how simple your welding tests are in the states here in chinada where only allowed a wire wheel no removing any metal. You have to have a backing plate and you have to demonstrate atleast 2 stop and starts your root gets visual inspection for undercut and on your hot pass your not allowed to go up and down only side to side as the up down traps slag and destroys the structural integrity of your weld and the once you finally get your cap on you get choose either bend test or x-ray test always choose the bend test because if they find any slag on the x-ray test fail if your plate bends into a perfect U with no cracks and no slag spots over 1/32 of an inch show on the back side of the bend you pass

I think I could do that, it was explained very well, and we got to see the weld as Jon was doing the welding. Good job and it was a nice looking weld. Thank you for the Video.

thanks for this video, I loved the overall explanation by the merle. Keep coming up with such content.

Very detailed and precise. Thanks for being informative. Appreciate the tips. Nice work by the way. 💯

Great Techniques! Welding with confidence, thanks👍

Doing this tomorrow in class. Awesome job and video, thanks!!

Very nice, like the technique on the cover pass, circle left pause, then the middle, then circle right pause! Nice job!

Thank you guys for the video, well done!

Lets see the back side 👌🥳🤷‍♂️🙋🏻‍♂️

Great job young man!!!

video is very detailed and precise welding explanation. good job! keep it up.

Helpful video, thanks Merle!

Starting these in class tonight. Nice vid. Thanks

That's awesome brother keep up the good work 👍

Thanks I’m in highschool and this helped a lot I kept melting my metal on the bevel

Wow that guy is a good ass Welder his skills shows thats his on another level.

Been having trouble with this test here at RSI but this video helped out

Im currently doing this right now. Good to see some other POV’s of how someone else does it just to help out. Good video

He talking lots about technique, but not showing the actual welds, in between passes....

Fantastic demonstration. Tnx.

You're my favorite Rosendo!!

Looks good

Great job WT fam. Wish we could've seen each pass before grinding them off so know what to look for

Thanks for the video

Great job

Nice video, well explained... but I'd like to see what you're talking about. What's it look like when you're done with the pass?

Great video

When I took my test many years ago we didn't get to set up the test plates ( the inspector did ) and all passes were done with 7018 and no grinding allowed. Hand wire brush ,scratch awl and chipping hammer.never strike the slag with the hammer .

Very good brother, from Indonesian 🔥🔥👍🏻👍🏻🙏🏻🙏🏻🙏🏻

Thank you so much

Tanks .. For this test

Merle is awesome

Hello, excellent thank you very much

Nice This would run on me every time I welding up with 7018 the whole thing running away on me and it looks bad. You make it look so easy.

Nice work

Name like that, you better be a welder!! Lol, great video!!

Thank you

Seeing the beads of each pass and the root bead penetration would be helpful.

thank u its cool

Great video 💯 subscribed

Did you fuck around with the arc force or “dig” running that root? Or did you keep it around 20% the whole way through?

Thanks ♥️

the best vid and very informative as always gj weldtube fam hope u always have great vids

up and down hand movement at the root can be processed with 7018 electrode ??

Good Job homies

Definitely agree with all the positive remarks here !! But just curious why they didn't show any of the weld till after it was completed...🤷‍♂️ exc. Here's the root pass completed, Here's the hot pass completed Here's the fill pass completed

Muy buen video, bien explicado. Solo me hubiera gustado ver como queda cada pase el de raíz y los de terminación, tal vez si los hubieras cepillado y mostrado para ver los cordones. Saludos desde Nicaragua

Thanks bro

That’s guys a beast

Awesome 👍

thx !

Ya hace falta otro video en español con proceso smaw 😞

Thx bro

Can you show how to weld thin metal ?

How much amps needed for root pass? Is it 9mm plate?

Nice One Sir.. i'm Solid follower.

Nice

i love it, from philippines

good jobs

Did you weld at 75 amps the whole thing?

Im from Indonesian Best of the best

How do you know what pattern to use when making your 1st pass? Do you do circles, whip it &come back, or left right then move up? How do you know what to use or when to use what pattern?

Forte the root must electrodes thinner?

How long should this test take?

4:14 What kind of grinder is that? Its look smaller and more handheld

You should’ve show the root pass. Nice Capp.

Thank you!!

Great video!

Nice.. i want to try..😁😁

How many many amphere is that please answer thankyou

Will it pass xray? I would do it differently.

How are ur fingers not smoking I can’t cue stick more then half a rod

Fanclub From Thailand

Need more

Damn, resendo looks so much more different from his first couple vids

I might try this tomorrow

I've never seen the up-down-left-right movement before.

Very nice good

Podrían hacer más en español sería muy bueno

Very educational u

Cuando Aran otro video en español

On criticism I have is the way you set up the root. If you run a heavy 1/8th land and gap, you can run the root at 90 amps like the rest of the test. It's a much easier way to do it in the field. I'm not climbing down off a scaffold to change my heat every time I need to run a root.

Does anybody prefer stringer beads when filling

Do you guys bend test your stuff

Instead of having a 6010 hot pass can I use a 7018 for the hot pass

in my area they would not let that slide, using a grinder an wire wheel

🇧🇩Nice welder🇸🇬👌👌

why not run stringers?

You not shown root how you weld just grind and started hot pass why?

What amps would you use for a 1/4" plate?

Thanks guys Gra8 video....I am currently doing this for a welding assignment soon & I was wondering what’s the lowest I can go on a hot pass cause 90 and 85 amps for me is to hot I can’t move my hands that fast So the puddle flows out on me regular...so is 70-75 good Option Or not ?

Really struggling with my root. I looked awesome last week and the slag fell right off the backside... but this week it looks like shit and is all bumpy. My teachers told me to grind it down thin when I start over with new electrode but when I do that it burns a hole and then I get stuck there cause I'm not able to fill it up... really don't know what to do. I feel like I'm doing everything in the same way as last week but now it's totally different results

Where are these guys testing where they are allowed a grinder for tests? They never let us use a grinder on any test in my trade. That would be awesome.

So after you lay the root down you grind it so it’s all flat in the middle ??

60-10 in Ac o DC???

Good morning Bro

Me gustan sus videos, pero no me gusta que no dejan ver cómo quedan los cordones después de cada aplicacion

I swear my problem is filling my undercut. I'm gonna try this at class hope it works