🔥 Uphill 6010 Open Root Restarts - Common Mistakes and How to Fix Them
Рет қаралды 90,910
6 жыл бұрын►SUBSCRIBE for new videos every Monday and Friday: goo.gl/FRdNss
As a follow up to last week's video (where Bob showed his son how to restart a 6010 root downhill) we are going to do the same going downhill. Bob is going to watch a student make a 6010 uphill root weld with a restart and then talk him through what happened and how he can fix it.
The mistakes made in this video are common to many welders and the intention is to show you what can go wrong and how to fix it.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
VIDEO SCHEDULE:
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► MIG Monday: New Videos every Monday!
► TIG Time: New Videos every Friday!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EQUIPMENT WE USE:
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► ArcOne Helmets: www.arc1weldsafe.com
► Plymovent Fume Extraction - www.plymovent.com
► Steiner Industries - www.steinerindustries.com
► West Chester Gear - www.westchestergear.com
► Tab and Slot Welding Tables: www.tabandslot.com
► Philips Welding Lenses (for Filming): www.phillips-safety.com/
► ESAB Power Sources: www.ESAB.com
► Everlast Power Sources - www.everlastgenerators.com
► AHP Power Sources - www.ahp.com
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
JOIN US ON:
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► FACEBOOK : / welddotcom
► INSTAGRAM : / welddotcom
► FORUM : / welddotcom
► TWITTER : / welddotcom
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ #welddotcom
Disclaimer: Weld.com is compensated for providing links in our descriptions. However, we only work with companies that we use ourselves and can honestly and ethically recommend to our audience.
@StreuB1 6 жыл бұрын
My hat is off to you for putting your kids (as a teacher, they're all "your kids") on camera to perform. It takes a lot to do that, it takes a lot of confidence in them and from their side. They must have a lot of confidence in themselves and in you for what you have taught them. Great job Spencer and keep at it!!! You're in good hands man; you've got a good teacher that cares about yall. Thanks Bob for the content!! Again, my hat is off to you for putting your kids on camera. Gives them exposure as well as showing beginners out there that the issues they are having, are normal and this is how you work through them. Would like to see more content like this.
@bobmoffatt4133 6 жыл бұрын
Brian Streufert Thank you for the support and encouragement.
@AkatarawaJapan 6 жыл бұрын
This is really helpful for us self-taught KZfaq amateurs. Thanks. And what a lucky student to have such a great teacher.
@StreuB1 6 жыл бұрын
I couldn't agree more. Putting the students on camera is likely one of the best teaching aids. This is next level shit. A+++ to Bob for doing it and the students for being up for it!
@spelunkerd 5 жыл бұрын
I find it easier to learn when the demonstration isn't perfect, and you make suggestions on adjusting technique. Good job!
@X3rapha 2 жыл бұрын
Smaw is my worst in class…I appreciate the videos a lot.
@anthonyfieldthetrollbuster9930 6 жыл бұрын
When's the camera guy gonna show us what he's made of? Must be an expert by now
@snowkracker 3 жыл бұрын
I just passed overhead 6010 open root. I won’t miss the burns on my bicep 💪
@danielmcconnell1096 6 жыл бұрын
Great video for open root plate! I love the new style of video with students and troubleshooting while while welding. If this video had been around when I was doing open root in school I would have learned it a lot quicker. Great video!
@lukepodmore7810 6 жыл бұрын
Hats off to bob n the camera crew you guys made weld.com much better to watch since taking over
@bobmoffatt4133 6 жыл бұрын
Luke Podmore Thanks for the support.
@tra757200 6 жыл бұрын
Yeah, I second that one. Love watching Bob welding and listing to his comments and instruction. If I weren't so old I would run up to OK, if I could find it, and take a class. Keep making those video's Bob, we love watching them!
@codydevore8108 4 жыл бұрын
@@bobmoffatt4133 what is your opinion on the plymovent extractors? Looking at getting some mobile units for our welding shop. How do they compare to Miller/Lincoln? Thanks in advance
@bobmoffatt4133 4 жыл бұрын
@@codydevore8108 Oh, absolutelo
@anthonylandis 6 жыл бұрын
love these teaching videos. Greatly helps me as a small shop teacher as well.
@JFROMM454 6 жыл бұрын
Sure wish I woulda had an instructor like Bob when I took my welding class. I'm sure I woulda learned much more and been much better out of school. I wasn't bad, but I needed more training
@champtree 6 жыл бұрын
Wow! What a great teacher!!! Golfer? Not so much.
@bobmoffatt4133 6 жыл бұрын
Par not good enough?
@beachboardfan9544 6 жыл бұрын
I like these formats, its great to see a professional do something, but I think there's the potential to learn a lot by seeing inexperience play out. How not to do something... or at least how something could be done better. It'd be cool to see the welds these guys do now and then when they graduate!
@KennyInVegas 6 жыл бұрын
Great video. really like your teaching style.
@walterbrunswick 6 жыл бұрын
Hope this kid appreciates the instructor he's got. Gain as much knowledge as you can. Some guys in my class would be goofing around in class, waiting to get out and go bum around the nearby Tim Horton's. Meanwhile I would regularly sit in the library reading everything from electrical theory to chemistry and metallurgy to proper techniques for whatever was on my mind that day. We had an intro welding course. First time I ran a fillet weld with an E7018, I showed my work to the instructor and he said, "I see you like that rod." Once you get out into the working world, you will appreciate the time spent learning.
@rickstroszka1622 6 жыл бұрын
Thanks for making these videos!
@chipsmydog 3 жыл бұрын
Great job teaching a difficult skill. Salute.
@cat637d 6 жыл бұрын
Great work guys!
@tatooguy65 6 жыл бұрын
Great job Bob and I love how you interact with your students, however, this is uphand and not downhand.
@bobmoffatt4133 6 жыл бұрын
Thanks, camera guy is upside down!!
@tatooguy65 6 жыл бұрын
Must be a plumber then. Bwahahaha!!!!
@MrPONCHO467 6 жыл бұрын
excellent instructor !!!!
@paulmorrey733 6 жыл бұрын
Great video Thanks to you both
@ccswelding1599 6 жыл бұрын
i always loved running 6010
@jakeclark1298 5 жыл бұрын
7018 and 7024 are my favorites
@Mikey-ym6ok 3 жыл бұрын
Good boy. Learning to weld with a good old classic hood. Props.
@tonybaggett1984 6 жыл бұрын
Great job! This kid will be going places. The only bad thing about this video is that damn Tequila commercial I had to watch to get to it. Never thought I'd see a liquor commercial that would make me not want to drink the product.
@codydevore8108 4 жыл бұрын
Bob Moffatt what is your opinion on the plymovent extractors? Looking at getting some mobile units for our welding shop. How do they compare to Miller/Lincoln? Thanks in advance
@matttradie1341 6 жыл бұрын
Your certainly a good teacher. Can I ask if you could quickly answer a question for me, I'm sure, considering I do do a fair bit of welding that I should know, but why in this video did he not do a restart using the rest of the rod? There was more than enough left to finish that run. Does the rod become somehow unstable or unreliable? Or is it a flux issue? Or is it just a reg that should be followed?
@bobmoffatt4133 6 жыл бұрын
He wanted to make sure to finish the run .We use the half burn rods on hot passes and tacking up.
@obi-shankenobi5891 6 жыл бұрын
5:49 - 5:55 Bob shows us what drinking 33 cups of coffee looks like in a weld shop
@bobmoffatt4133 6 жыл бұрын
Gettin it!
@morganmclaurin5865 6 жыл бұрын
Can you please make a video on how to pass the CWI ?
@jeremydoblinger3609 6 жыл бұрын
Im rocking the same hood as the kid (951p huntsman)..works well,runnin high amperage dualshield fluxcore mig..Its so smokey ive went to the passive shade 11 in my huntsman instead of my normal auto dark rig..pro tip.
@dodikirwantono6619 2 жыл бұрын
Hi Bob. I am a beginner in welding. I tried to apply your method. I draged up the rod but I couldn't see the puddle. Would you give advice bob. 🙏
@ryanbeard1119 2 жыл бұрын
Whats the long arc edge thing re eas ralking about at the end, is it flux dropped into each side?
@TMRYZF 5 жыл бұрын
What is good vertical welding, from bottom to top or from top to bottom? Thank you.
@kf8575 2 жыл бұрын
Bottom to top. Vertical up. Always a better end result👍
@matttradie1341 6 жыл бұрын
Oh, one other thing I wanted to ask too, I'm in Australia by the way, I picked up a box of schwiesstechnik rods the other day from a market. These rods were 'dc' only low hydrogen. Tried them out on dads old copper core AC transarc. No chance. Stuck like glue. Over and over. On my BOC 170 dc inverter, no problem. Not great on restarts, seem to create a deep crater and hard to strike after. Is that common on dc rods? I've never seen dc only rods before. Or is it just that they are shagged? They look ok.
@bobmoffatt4133 6 жыл бұрын
Most lo-hy rods are hard to re strike.
@rickbrandt9559 6 жыл бұрын
Students on camera, YES, inspires the teacher and student,if they can face the camera they will conquer any test.
@flacko5894 5 жыл бұрын
Aren’t you supposed to make small movements up and down?
@mattfogarty8144 3 жыл бұрын
You can do a straight drag as well whipping is done as well to keep the keyhole under control if your keyhole gets too big you whip out of it to cool it down
@workwillfreeyou 6 жыл бұрын
I'd like to see a " Pipeliner " entrance test . 6010- 24" pipe - 1/2" wall - downhill?
@hb5007 3 жыл бұрын
24" is flat
@JFROMM454 6 жыл бұрын
I've been trying to get back into the open root stick welding game. I can run downhill generally well with minimal issues 1/8 6010 80 amps. 3/32 root and root face. Uphill gets me. I can't seem to just run it straight, it blows up the root. If I stitch it it goes better. Same 3/32 root and root face. 80 amps it blows up, 75 amps it wants to freeze and stick on me. Any suggestions?
@bobmoffatt4133 6 жыл бұрын
Short steady arc. Work it if you need to.
@workwillfreeyou 6 жыл бұрын
Any parts of my weld that were bad " The Camera Guy " did.
@JORGE-SOLDADURAS 3 жыл бұрын
Y si prueban la chapa vertical no la inclinacion que esta puesta.
@n3qdz 6 жыл бұрын
FORE!!!!!
@raymondmiller162 2 жыл бұрын
Did he say he was checkin him out? Lol
@user-xf7ud1vs8n 6 жыл бұрын
Like 참잘했어요 ^^*
@200xcBruce 6 жыл бұрын
You need to close the face on your tee shot nice slow swing looks good
@ppapalos Жыл бұрын
Would be a privilege,just knowing you from the channel ,to be my instructor Bob.
@broken1965 6 жыл бұрын
Come on turn that shoulder Bob im 52 an can still getter back their 3/4 back swings is the way. lol
@bobmoffatt4133 6 жыл бұрын
Jon A I'm old and fat!
@eakd8271 3 жыл бұрын
Whip the key hole back and forth looks like you just pressing and dragging
@edalysalgado3568 3 жыл бұрын
Did he did zig zag or up and down ?
@workwillfreeyou 6 жыл бұрын
Bob, downhill is uphill?
@bobmoffatt4133 6 жыл бұрын
workwillfreeyou Title mistake.
@Derickhart 6 жыл бұрын
TV Nervous
@bestofus8766 6 жыл бұрын
ты должен говорить поверни электрод!
@beaker1736 6 жыл бұрын
This is uphill not downhill title is wrong!
@isellcatlitter 6 жыл бұрын
not sure what he means, but it might mean he is restarting the weld on the downhill side of the weld and then welding up hill.
@beaker1736 6 жыл бұрын
thats how you should always restart when welding open root, you start back on the weld to get it heated up and red that way when you get to your stop you get full penetration instead of a lil crevice
@beaker1736 6 жыл бұрын
but downhill is welding from the top to the bottom uphill is welding from the bottom to the top
@bobmoffatt4133 6 жыл бұрын
Cup Walker We are aware of the title mistake. Thanks for noticing.
Marusya Outdoors
Рет қаралды 286 МЛН
Weld.com
Рет қаралды 172 М.