4090 ITX Overkill - New Dan C4-SFX

No video

4090 ITX Overkill - New Dan C4-SFX

Рет қаралды 731,820

Жыл бұрын

Check prices on Amazon below
Noctua D12L: geni.us/T5L6yUs
NVIDIA RTX 4090: geni.us/xY6oY
AMD Ryzen 7800X3D: geni.us/DfRR7
AMD Ryzen 7950X3D: geni.us/BE58M=
ASUS ROG STRIX X670E-I: geni.us/qaXrU
Arctic P14 PWM: geni.us/5LrX5
Noctua Slim 140mm: geni.us/mg02AG
Dan C4-SFX: www.dan-cases....
Moddiy custom 12VHPWR: www.moddiy.com...
Is this the best new ITX case? I built an absolute monster inside it to find out.
need a new wallpaper? optimum.store/...
Video gear
Camera: geni.us/5YfMuy
Primary Lens: geni.us/pWnoPBr
/ optimum
/ optimumtechyt
/ only_optimum
As an Amazon Associate I earn from qualifying purchases.

Пікірлер: 705

@farr1260 Жыл бұрын

I am so glad you're back to reviewing ITX cases it feels like its been awhile, love your stuff as always man! can't wait for more ITX stuff

@MrLincoln87 Жыл бұрын

don't think there has been many new cases tho right? I think they all went on the back burner the second 3 slot gpu's became the norm

@farr1260 Жыл бұрын

@@MrLincoln87 and with 3 slot GPUs manufacturers will adapt, there is loads of underrated microbrands out there and even hidden gems from aliexpress/taobao (Although i doubt Ali will review anymore aliexpress cases cause he said on stream that some of them never arrived.) Head on down to sff network and you can see builds on said less mainstream cases :)

@griefingcloud4391 Жыл бұрын

You're the best sff building content creator. Always inspired of your video, from content to editing skills.

@Ka0Zltd Жыл бұрын

Would like to check out some more SFX content creators, any recommendations?

@velzun8075 Жыл бұрын

@@Ka0ZltdSFF*

@loutish315 Жыл бұрын

@@Ka0Zltd Relaxing SFF and MXC Build (idk if thats spelled right)

@jmeffendy Жыл бұрын

If you enjoy PC build content, you should check out Mr. Matt Lee's channel.

@duskparanormal Жыл бұрын

@@Ka0Zltd GGF Events has some insanely clean SFF builds you may enjoy. He's the overall GOAT builder IMO and deserves 4x the recognition.

@hookyknife Жыл бұрын

Well written and concise review. Thanks for keeping us up to date with the latest ITX releases

@maxhayden8634 Жыл бұрын

I just find ITX builds which turn out fitting so nicely to be so satisfying

@lian2780 Жыл бұрын

Hey I gotta say, you got me into this SFF PC biz and so far Im addicted. Swapped my O11 Dynamic for the NR200, super easy to build in. Convinced my friend to go with an all white NR200 build, gonna be mint. Thank you for your help in spreading the SFF knowledge!

@humzatahir3038 Жыл бұрын

In the same boat here switched from my O11 mini to the SSUPD meshlicious no regrets at all

@ChenChennesen Жыл бұрын

very jealous when i see my partners nr200p next to my o11 air mini. crazy how much power you can fit in there.

@BrunoRodrigoPintodaSilva Жыл бұрын

Now, go to the next step and try to fit custom loop in your case. Man... it's not an easy task, but it's just damn satisfying. I'm stil trying to finish my Phanteks Shift, but that third radiator is "fighting" back. hahahah. Anyway, it just feels great to work with those SFF cases and the result is just awesome, clean and saves a lot of space.

@danielbrown3449 Жыл бұрын

7800x3d laughing at the 7950x3d right now

@Knowledge0649 Жыл бұрын

Facts

@ghost15214 Жыл бұрын

Crying with my 7950x3d😅

@tadejpeckaj1151 Жыл бұрын

@@ghost15214 you can give it to me and stop crying 😂

@parkersnipes6573 Жыл бұрын

Do you know the monitor he's using by any chance?

@ahmadaburahma9756 Жыл бұрын

Yes but the 7959x3d is much much better as an all rounder cpu since the 7800x3d is only good for gaming and not much else

@perpetualprocrastinator Жыл бұрын

Watching the SFF build process, utilizing every nook and cranny of the ITX case is always something very special but the cherry on top is fitting RTX 4090 inside and it's almost cathartic.

@warmachine5835 Жыл бұрын

Slim fans on top of an FE card was something I noticed with the 3080FE--the fin arrangement is perfect for catching external airflow, and when I put slims in my Ncase M1 before water cooling the GPU, the difference was night and day on temperature.

@asimovnicholas471 Жыл бұрын

the airflow of GPU is totally wrong. Hot air is going down.....

@warmachine5835 Жыл бұрын

@@asimovnicholas471 convection doesn't matter when you have mechanical airflow. No amount of convention will overpower your intake/exhaust fans.

@asimovnicholas471 Жыл бұрын

@@warmachine5835 Got it，Thanks.

@yourlocalhuman3526 Жыл бұрын

Bro your videos are unmatched man, I legit have to resist the urge to repost your stuff on my inst story

@Jalopymedia Жыл бұрын

Always the cleanest itx builds. Love it.

@tongoso Жыл бұрын

This is amazing, can't wait to see the comparison with NR200p max and A4!

@ProTroy_ Жыл бұрын

Been missing your ITX videos, keep them coming!

@bobbymoss6160 Жыл бұрын

You using the Arctic cooling fan in this case instead of some ridiculously overprice fan makes me so happy.

@mostsaneperson Жыл бұрын

can’t wait for the liquid cooled 4090 build! Great content as always!

@chippunkcsgo1104 Жыл бұрын

Gimme Gimme Gimme. Im waiting for him to give me the input i need to build it myself :)

@jesuss.9331 Жыл бұрын

Excellent quality work covering SFF, love the channel! You deserve all the subs

@PaulHindt Жыл бұрын

My last gaming rig was built in the DAN-A4-H20 based on your review. I highly recommend Dan cases now.

@Joeleon2 Жыл бұрын

I always love these ITX builds. I currently have an ITX build and I'm planning on using one again in my next build, glad to see the cases continuing to improve their design with aspects like the GPU vent.

@Angelcee492 3 ай бұрын

I like building in ITX cases because it's a lot easier to find a place for them in a cramped desk is this is the BEST channel for ITX cases. Thank you for another great vid!

@Outland9000 Жыл бұрын

I dont know why but I really like these dummy beefy ITX builds.

@astrozsfe9672 Жыл бұрын

finally another maxed out build. the completely water cooled sff is still my fave

@teekanne15 Жыл бұрын

Really appreciate, what you bring to the PC gaming community. Some people like modern sleek disgn and have outgrown the colorful rgb hotwheels look. It baffles me for years now how peripherals and general hardware isnt made to appeal to adults. Most of us that can afford high end gaming these days are people with jobs and family that don't want an eyseore.

@Thunderbolt03 Жыл бұрын

That's very impressive, I didn't think you would be able to get such temps with that setup, really cool stuff, no pun intended

@Ureroll Жыл бұрын

Small factor and on air. Can't get any better than that. Sexy build gg

@FynnR Жыл бұрын

Nice review mate! You got me hooked on SFF PCs few month's ago and now I'm building my third setup in tiny cases: Meshlicious, RAW S1, NR200P and special mention A09 HTPC case (3.8L) office pc with Pico PSU and 5600G. I'm glad I own the 3070 FE though, no clearance issues so far!

@thecayman8567 Жыл бұрын

You are going to hit 1M subs very fast! I promise) Love this channel

@nouryy Жыл бұрын

That's it. You've convinced me to go itx. Gonna use the same case, cooler and PSU.

@kotztotz3530 Жыл бұрын

The P14 is an absolute beast for negative pressure use cases.

@user-pf8zg5qt5v Жыл бұрын

Your video's help me with my ADHD and from time to time I check if you uploaded something new. This is just perfect every single time. Thank you 🙏

@saydji Жыл бұрын

King of ITX !! looks amazing

@dreal2021 Жыл бұрын

No one puts out videos that i look forward to more. Another amazing one!

@edwood1090 Жыл бұрын

What a great case you can't buy.

@nkuete Жыл бұрын

still using the SF750?!?! that thing is just chugging along. I'm SO happy to see it can run the top tier equipment even 2 years after I bought it

@hamzafifty7 Жыл бұрын

LETS GOOOOOOOOOO

@federicoconforto9059 Жыл бұрын

the counter at the end of noise demostration... perfection.

@DenisJak 10 ай бұрын

Best KZfaqr for competent and critical reviews. For me, same level as MKBHD but for cases, overclocking, gaming and lifestyle hardware. Thank you

@nameresu Жыл бұрын

Finally, air-cooled sff with no riser, capable of large coolers and smaller, than NR200. Please check fitting different air coolers, especially Thermalright PA120

@arcsum Жыл бұрын

if its taller than 145mm it wont fit SS135 does

@BoostedBill96 Жыл бұрын

I love my Dan A4 H2O but damn this really takes the cake for compatibility

@sebastianep Жыл бұрын

This is my new case! Perhaps it would be interesting to compare D12L vs C14s in this case?

@jonnymac86 Жыл бұрын

Dan knocked it out of the park here. i love inverted cases for itx.

@rifle Жыл бұрын

I'm tempted to build something similar as my next build to upgrade from my current 2080ti system, but with potentially implementing Direct Die cooling, Ali has got me hooked on the SFF builds.

@zeedamn2804 Жыл бұрын

I definitely need to see this watercooled

@hrmanlarn2530 Жыл бұрын

Thank you for this video. My last ITX build was an thermal disaster.. This build is solid. I´ve copied your setup with the 7800x3d for VR Flightsim gaming. Works great. Looks great. I have one improvement: use the angled cable of Moddiy for the GPU. "ATX 3.0 PCIe 5.0 600W 8 Pin to Angled 12VHPWR"

@Topper_Harley68 Жыл бұрын

Was wondering about that, is it angled up or down and what length did you buy?

@JohnK26 Жыл бұрын

Another nice build, as always 👍🏻

@deltax7159 4 ай бұрын

drooling over this build. I cannot wait to build my first PC at the end of this summer. I will be using this as a reference build. I think starting with a 4090 might be a bit much for me seeing as its my first build, but thinking about a 4070. Will be using it for some gaming but primarily as a data science machine learning rig.

@Drewstir68 Жыл бұрын

Babe wake up! New optimum tech video!

@Tential1 Жыл бұрын

Wow.... That set up is exactly what I'd go for. I love noctua air cooling. I'm a fan boy

@frankiev1785 Жыл бұрын

My next build right here!! Love this one thank you optimum.

@GATOtyger Жыл бұрын

Yes you can fit 4090 in the Ncase M1. Sent from my Ncase M1 4090 FE B650e-I 7900x3d c14S sf750.

@xITzLittleDudex Жыл бұрын

These look stunning, I hope we will be able to get hold of them in the uk soon!

@Robbinsffxi Жыл бұрын

And now that I finally got to the point of ordering one, it's discontinued. New version comming next year...

@Hokunin Жыл бұрын

DanA4 is just getting bigger and bigger with every model :D

@knack6157 Жыл бұрын

Damn this is so good to watch.

@alexjakobsen7817 Жыл бұрын

Nice build. How long is the Moddiy custom 12VHPWR cable you have? is it Cable style. HD Single Sleeved ?

@fattui Жыл бұрын

Please go ahead with the nr200 comparison, that would be awesome!

@shervingreen3918 Жыл бұрын

DAN Case H2O is just the best. 4090, 7800X3d with an aio. Sub 11L. Like it.

@Flaminq Жыл бұрын

Your curtains match the “Founders Edition” graphics cards airflow vents perfectly

@_Gray_Fox Жыл бұрын

Great Video @Optimum Tech Wich length did you choose for the "Moddiy custom 12VHPWR"

@constantinosschinas4503 Жыл бұрын

At last a creator that knows how to setup and a manufacturer that have made it possible. Gpu shroud out and cpu direct intake are the one ways to do the job properly. In AIO the back would be the exhaust and AIO could blow inside.

@RdeanF Жыл бұрын

This case is out of stock everywhere 👺

@modus_ponens Жыл бұрын

The case (and review) we have been waiting for!

@strider029 Жыл бұрын

It's not the ITX design that hooked me, it's the design that allows me to put the unit at my left side. So many cases are right handed.

@prodigy227 Жыл бұрын

Best compact setup ever!! Wow 🎉

@avmail7097 Жыл бұрын

Is it just me or is this guy looking more and more buff?

@Garrett1974 3 ай бұрын

That SF750 takes it like a champ doesn't it? wow...

@solidoperative Жыл бұрын

Love this build

@the_otd_arash2128 Жыл бұрын

Awesome as always ali great job 👌🏻👌🏻👌🏻

@sebleaf8433 Жыл бұрын

This is really cool. I think now I know what I'll build for summer.

@Idtelos Жыл бұрын

Definitely getting this case.

@kaptennemo1043 Жыл бұрын

I love this guy, the pc so compact which is nice 👍

@itsyaboijoeysalads6300 Жыл бұрын

Dang it man. I hate how easily you can sell these SFF cases to me. If I wasn't in love with my current tower (and frankly if i had the cash) I'd absolutely already have checked some of these out. One day I'll join in on the SFF insanity :D

@brafya Жыл бұрын

the absolute godking of pc builds, none other like optimum

@vr4racer Жыл бұрын

7800x3d Formd T1 looks to be the ultimate setup

@sushimshah2896 Жыл бұрын

3:36-🧑🏻‍🍳😗🤌🏻 Felt like drifting through space with those tiny dust particles!

@bojedone2729 Жыл бұрын

Cool case, wanted to change my nr200p to this one. I would also like to see the temperatures inside the case and the memory temperature in heavy games (stress test)

@bas8732 Жыл бұрын

Really nice build, it looks amazing as well!

@kosi2174 Жыл бұрын

Bruh this build can run better graphics than my eyes lol. Majestic job as always, truly art

@eUzzy- Жыл бұрын

Best tech KZfaqr

@svn5994 Жыл бұрын

Far from it. Inaccurate testing results and more worried about input latency than anything else.

@rubenortiz6576 Жыл бұрын

We need this same build water cooled!! Great stuff!!

@adamc6954 Жыл бұрын

What length moddiy cables would you get for this build? Great content as usual!

@Shecomesfirst Жыл бұрын

@Fidalgodev Жыл бұрын

Can you tell us what length for the GPU cable?

@sjmiller609 Жыл бұрын

Air cooling is glorious and highly practical

@mortFPS Жыл бұрын

Fact: optimum tech (Ali) has worn the same black shirt in every thumbnail/ vid apart from this one (of his newer style content)

@dan-fk4rv Жыл бұрын

really like the feet design, never thought the panels of dan cases looked very nice though, even compared to other vented panels

@fi5ke Жыл бұрын

clean af

@Wirenfeldt1990 Жыл бұрын

Hoping to see 7800X3D on 240mm cooler figures at some point.. Itching to swap my 9900K for one inside the M1 at some point this year, but i'd love to see concrete temperature figures before starting to plan everything out.. Also dying to see your custom mouse with the wheel in situ..

@changliu7346 Жыл бұрын

The 7800x3d will run cooler than the 9900k definitely, so if your current build can handle 9900k, you should have no problems.

@Hrupix Жыл бұрын

my 7800X3D runs max at 50W in 4k gaming. I bet an boxed cooler would keep it down too.

@yun8714 Жыл бұрын

Patiently awaiting the 4080/4090 GPU ITX custom loop video...

@archivewrk Жыл бұрын

It would be amazing to have another video about the best ITX cases but 2023 version

@cortlan Жыл бұрын

I wish I waited for this release! I ended up with an NR200, but this gives me buyers remorse

@RodimusPrime29 Жыл бұрын

Lol was just thinking the same thing.

@phavixeysayavong2789 Жыл бұрын

Every pc you build is so damn sensational its insane.

@TheLordstrider Жыл бұрын

this is great, i will get one for next winter to keep my house warm. will save on heating bill in the process.

@hellowill Жыл бұрын

Damn thinking an ITX build like this next. I'd mount it under the desk.

@javiej Жыл бұрын

Under the desk? be careful, you may end with 700watt of heat with nowhere to go, or even recirculating into the case...but yeah, it can feel nice during that winter

@zosterinski Жыл бұрын

That noctua would be nicer in black. Anyway, great presentation (as usual)

@oscarh.c.5539 Жыл бұрын

Gorgerous build

@_drenk_ Жыл бұрын

With the "Noctua Slim 140" you have linked to "Noctua NF-A14x15" which doesn't seem to exist anywhere. Where can these be found, or similar alternatives?