40mm Brushless Motor Install Proboat Sonicwake 36 Electronics Upgrade

No video

40mm Brushless Motor Install Proboat Sonicwake 36 Electronics Upgrade - OSE 150a Esc

Рет қаралды 14,836

2 жыл бұрын

GET BOAT HERE
www.avantlink....
SPEKTRUM SMART 3S 5000MAH 100C
www.avantlink....
GET ESC HERE
www.offshoreel...
DX5 RUGGED
www.avantlink....
Sss 4074
rcboatbitz.com...
The sonic wake is the perfect boat for upgrading, it's easy to work on inside & out. The boat really don't need to be upgraded it's plenty powerful right out the box. I just wanted to show you guys How easily upgradable this boat really is. She's gonna scream now boy's..
50 KNOTS AND NO SMOKE C'MON!
THANKS FOR WATCHING IRONCLAD RC TINKER TEST AND TUNE EVERYTHING
Personal contact information ironcladedout@gmail.com

Пікірлер: 86

@mountain19dunlap Жыл бұрын

I bought a sonicwake V2-36 off of eBay a total wreck but watching your video it's come back to life. I have a spektrum 4074 water cooled ready to drop in keep up the videos

@IRONCLADRC Жыл бұрын

Glad to help. Build it ironclad

@johnsneen424 2 жыл бұрын

No need 2 apologize Big B!!! Love the longer vids!!!!

@rodneyrasmussen1199 2 жыл бұрын

Can’t wait to see it run. Love the videos BIG B.

@finders-keepers1518 2 жыл бұрын

Didn't take long for this thing to become a total BEAST

@IRONCLADRC 2 жыл бұрын

EVERYONE wanted to see this thing IRONCLADED OUT. BOOM Thanks for watching Brother

@marxboatworx 2 жыл бұрын

Hey man, good call putting the ‘ big block’ in the Sonic wake..cant wait to see it running!!

@IRONCLADRC 2 жыл бұрын

I wanted to put it in the ul-19 so bad, I may just throw it in there one day for sh%to & giggles lol. I ran it on 4s yesterday didn't get to put 6s on it because it started pouring rain. Hopefully tomorrow the weather will allow a 6s run. Thanks again my friend I really appreciate the support. Cheers

@marxboatworx 2 жыл бұрын

@@IRONCLADRC yeah I know what you mean..you and I both know you’re going to do it!! Youre like me, when you get an idea in your head the only way out, is to actually DO IT!! Haha🤣 go for it.. see how the Sonic goes on the 6S, cant wait to see!!

@SteveLane61 2 жыл бұрын

Great video Big B, and great mods 👌 I make my own ESC mounts and battery trays using 2mm foam board (yeah you know I love the stuff) with two layers of carbon fibre mat and epoxy. Strong, light, cheap and IRONCLAD! 😉 And never apologise for the length of your videos buddy... longer videos = more knowledge shared 👍

@devilsreject78 2 жыл бұрын

I have done this with the boat and I also increased the prop size it was very hard to drive cuz if you gave it too much throttle too fast it was literally Spin and flip upside down and torque of the crop which spin the boat on the top of the water

@IRONCLADRC 2 жыл бұрын

Bigger turn fins help stop the spin out

@timothyhaley1185 2 жыл бұрын

hey IC....when you say ..more power...i'm with ya all the way...when you are choosing a smaller cooler ring for that mtr.....remember: 1. the battery creates the power 2. the esc transfers the power 3. the motor transfers it to heat.....motors melt....that armature shellac turns liquid and shorts everything. .hope the shorty ring works...

@IRONCLADRC 2 жыл бұрын

Hopefully it will work out. I don't push my boats to hard. I may put the larger ring on if Temps get hot.

@tm5123 2 жыл бұрын

@@IRONCLADRC Does the transmitter/reciever have telemetry options, you could have a temp reader on the motor, keep you in the loop on whats going on below deck as your boating along :D

@SuperScottCrawford 2 жыл бұрын

I like your style, your enthusiasm, man! Subscribed!

@IRONCLADRC 2 жыл бұрын

Welcome to the channel brother. BUILD IT IRONCLAD 👊

@hoofarted8709 2 жыл бұрын

...you can still try those trim tabs...just drill a few small holes so the water can still drain out...but i know you have already thought of this bro but i wanted to put my 2 cents in...i just got the sonicwake and im following in your footsteps so thanks for all of the videos

@IRONCLADRC 2 жыл бұрын

All great minds think a like. They would be to big. I want to get the split trim tabs for the sonicwake. rcboatbitz.com/product/proboat-sonicwake-upgrade-dual-trim-tabs-jsw50/

@edsheldahl276 2 жыл бұрын

Quick question I basically built a clone of sonicwake upgrades and I was curious what you set you punch level at on your ESC ? And any other setting adjustments suggestions would be greatly appreciated 🙂 Love Your videos you rock!! 👍👍

@IRONCLADRC 2 жыл бұрын

if its your first run with your new set up then i usually run My boats punch at one but if I'm confident in my set up id go up to 5 punch, depending on what I'm trying todo

@edsheldahl276 2 жыл бұрын

Thank you

@RCplamodel 2 жыл бұрын

Cool 👍😎😁👍

@Dr_Jet 2 жыл бұрын

Your ESC mount solution gets the Dr. Jet Seal of Approval! 👍👍, but the color combination leaves me somewhat flummoxed..... Slime green in a blue and white boat? What were you thinking? 🤔 Oh well, it's hidden from view so everything is PERFECT!

@IRONCLADRC 2 жыл бұрын

Lol 😆 I know right. Hopefully we won't see it at 55 plus mph! C'MON

@Dr_Jet 2 жыл бұрын

@@IRONCLADRC A blue and white blurrrrr..............

@norcalrc 2 жыл бұрын

Damn bro you are ironclading the shut out out of the SonicWake. B to the G . Boat gang ho!

@IRONCLADRC 2 жыл бұрын

Yea man I'm working on it, she's definitely GETTIN THERE. The mod was easier than I thought it would be. BUILD IT IRONCLAD

@Acestrex 2 жыл бұрын

Pete repeat!

@injest1017 Жыл бұрын

Great video! What brand locktight do you use? Thx!

@IRONCLADRC Жыл бұрын

5mm lock nut www.offshoreelectrics.com/proddetail.php?prod=mc-94205aXXX

@injest1017 Жыл бұрын

@@IRONCLADRC sorry. I meant the the tube of blue loctite. What brand do you use? Thx!

@arrmaboy_6508 2 жыл бұрын

The motor is sold out what else can I put in

@tomminella6036 Жыл бұрын

what u do about front mount???

@meallbhan Ай бұрын

I was wonder that myself. As the diameter is for the smaller motor it may have to be sanded also, unless it's flexible enough to fit round the top of the new motor and screwed into place. Oh. I read your comment as the top mount, not the front lol

@edsheldahl276 2 жыл бұрын

Quick question what do you set your timing at on your flycolor esc? I have this exact same set up in my sonic wake And it's pretty badass but just trying to tune it a little bit more

@IRONCLADRC 2 жыл бұрын

I believe I had it at 15° or stock timing? I can't remember

@sulevvorg7983 2 жыл бұрын

Good info🥰🥰🇪🇪🇪🇪

@pinoyDIY72 2 жыл бұрын

Awesome RC , subscribes done

@IRONCLADRC 2 жыл бұрын

Thanks for watching & welcome to IRONCLAD RC

@MrErik2222 2 жыл бұрын

Which Board do you think I should use, cutting board or fiberglass for ESC mount?

@IRONCLADRC 2 жыл бұрын

Either one really, personal preference.. I used the cutting board because it was thicker than the fiberglass and lighter.

@MrErik2222 2 жыл бұрын

@@IRONCLADRC thank you

@madmicsrc6834 2 жыл бұрын

I have both boats and dropped the 3674 from the sonicwake into the ul 19 and speeds were no different 65 mph

@IRONCLADRC 2 жыл бұрын

Good to know brother. Thanks. I've actually been watching some of your boat vids. Good work brother. Thanks for watching

@jooonsRC Жыл бұрын

1 buddy of mine is struggling to get his shaft out

@IRONCLADRC Жыл бұрын

Heat the collet up just a little bit

@edsheldahl276 2 жыл бұрын

I have a sonicwake and I'm looking to upgrade the electronics and I was wondering if you had a chance to run your boat and what your feelings on the upgrade from stock ?

@IRONCLADRC 2 жыл бұрын

I'm going to run it on 6s here in a few minutes video will be out tomorrow morning. I ran it on 4s the other day here's the video. Way more power so far I like the new powerkzfaq.info/get/bejne/aZqGoLN_tcWnqn0.html

@ck6953 2 жыл бұрын

Hi If I want to make a 1m long boat at 200km/h, what motor should I use? Do you have any recommendations?

@IRONCLADRC 2 жыл бұрын

Really depends on the weight of the hull and what your trying to do with the boat. 40 series motor should work. Something like a 40 84 or 4092 is. 1600-1900kv range? Hope this helps

@AutoBodyEverything 2 жыл бұрын

Where is the motor you showed everybody in the thumbnail?

@AutoBodyEverything 2 жыл бұрын

That’s called click bait, falls expectations👎

@IRONCLADRC 2 жыл бұрын

My first click bait video and I get called out for it. 👌 thanks brother 👊

@edsheldahl276 2 жыл бұрын

Just wondering what would the difference between the sss 4074 and the sss 4082 both 2000kv besides the obvious can length? Still trying to rap my head around what's going on inside these brushless motors. Just want to make the right choice before buying. Already ordered the flycolor 150 esc. Not looking to break speed records just decently fast with no heat issues. My stock boat has Basically had to heat issues from day one. Sorry for rambling just looking for advice.

@IRONCLADRC 2 жыл бұрын

I'd stick with the 4074, the 4082 may heat the speed control up a little more than you'd like it to. The longer can offers a little more torque than the short can, but has more current/Amp draw in return. Since you already have the flycolor otw I'd stick with the 4074. I think the 4082 would be pushing it. In my opinion

@edsheldahl276 2 жыл бұрын

@@IRONCLADRC Much appreciated Thank you!!

@rodneyrasmussen1199 2 жыл бұрын

Awesome

@IRONCLADRC 2 жыл бұрын

Thanks foe watching brother in boats! 👊

@williamwise3050 2 жыл бұрын

Where I can get batteries 4 s good ones 2800

@IRONCLADRC 2 жыл бұрын

I've used these spectrum smart 2200 4s 100c in my blackjack 24 and they were amazing. A little pricey but if you have any issue they have a warranty. Where as most other companies do not. www.avantlink.com/click.php?tt=cl&merchant_id=953aec29-878e-4306-b620-2df85883455e&website_id=70256520-69d3-496b-a06d-cfbf9af7a81d&url=https%3A%2F%2Fwww.horizonhobby.com%2Fhttps%3A%2F%2Fwww.horizonhobby.com%2Fproduct%2F14.8v-2200mah-4s-100c-smart-lipo-battery-ic3%2FSPMX22004S100.html

@Budgetrcbuilds 4 ай бұрын

Hey brother I’m having issue after issue with my flycolor 150s and what would be the next best esc and motor

@Budgetrcbuilds 4 ай бұрын

Sealing 180 ? spectrum 160 ? And what big motor should I use for top speed

@IRONCLADRC 4 ай бұрын

Are you gonna do the big block mod?

@IRONCLADRC 4 ай бұрын

If so sss 4082 2000kv should be a beast with a hobbywing 180 www.offshoreelectrics.com/proddetail.php?prod=tfl-sss-4082-v2&PARTNER=ironclad

@Budgetrcbuilds 4 ай бұрын

@@IRONCLADRC what about the 4092 2200kv or is that not enough torque

@Budgetrcbuilds 4 ай бұрын

@@IRONCLADRC is the firms 160 a lot better than the sealing 180?

@joegomez4408 Жыл бұрын

What size shaft is that

@IRONCLADRC Жыл бұрын

. 187 (3/16") flex cable with 3/16 prop shaft

@joegomez4408 Жыл бұрын

@@IRONCLADRC thanks

@joegomez4408 Жыл бұрын

Is there a way to fit a 5mm shaft without changing the flex cable?

@xillianto 2 жыл бұрын

how long is that boat in size ? by mm if you could measure :P

@IRONCLADRC 2 жыл бұрын

914mm

@xillianto 2 жыл бұрын

@@IRONCLADRC man, thats really close to mine, that is hull only ? not with rudder ?

@IRONCLADRC 2 жыл бұрын

With out rudder

@xillianto 2 жыл бұрын

ok, my deltaforce is 988 on hull only, my rico is about 700mm or so

@crazy1tony 2 жыл бұрын

I’ve been watching you for a bit how do I send you something cool??

@IRONCLADRC 2 жыл бұрын

Thanks for watching brother I appreciate it, you can email me at ironcladedout@gmail.com To discuss shipping arrangements cheers