4Runner 2nd Battery Tray Install | C4 Fabrication
Рет қаралды 1,675
Күн бұрынBeen a long time coming and will still be a little while longer! Got a second battery tray for the 4runner. TOO bad I don’t have the money for the rest i.e. battery, cables, solar, etc. haha. Hope you enjoy! C4 Fabrication.
The Channel:
Welcome to SMITHEYS! My name is Joey Smithey and this channel focuses on mainly trucks: maintenance, how to’s, instructional videos, and some travel. Stay tuned for more videos and become part of the squad (SQUAD SQUAD!) by subscribing and follow along in my journey! Enjoy!
Edited With:
Adobe Rush on iPad Air 4th Generation
Music in the Videos:
EpidemicSound.com
Contact info:
smitheysemail@gmail.com
@Jsauce8921 3 ай бұрын
Good video thanks
@46miles 6 ай бұрын
But, now I know the tray, and installation process, that I want for my 4Runner! Thank You!
@smitheys 6 ай бұрын
Glad to help!
@toocutetobeanengineer 6 ай бұрын
Thanks for this. In my 2019 4runner off-road, there was no need to remove the connector on the side panel, just the lower one, plus rotate the ground wire. Once installed, I found the two long threaded rods were tight against wiring / tubing, so I put metal tubes over the threads where there was contact. Excited now to figure out what electrics to install!
@brettlynch2707 Жыл бұрын
I just picked up a 22’ runner. Your videos have been helping me out bro. Thanks keep it up
@smitheys Жыл бұрын
Dang, Brett has some MONEY!! 2022, CONGRATS MAN!! I can only live that dream. Haha. Thanks for watching!
@rhino4602 Жыл бұрын
Great video. I’m also planning on doing a dual battery setup for my 2016 4Runner. I’ve looked at several different secondary battery trays. After watching your video I think I’m gonna go with the battery tray from C4 Fabrication. Everyone else charges way too much. I’m also going to piece my project together a little at a time. Looking forward to watching your next video of the project.
@46miles 6 ай бұрын
I put masking tape in the socket, then the nut, the tape keeps the nut tight in the socket, it won't fall out!
@doobedi Жыл бұрын
Would it fit the 4th gen 4runner?
Genesis Offroad
Рет қаралды 4,7 М.
SMITHEYS
Рет қаралды 24 М.
Rago Fabrication
Рет қаралды 13 М.
4WD 24-7
Рет қаралды 2 МЛН
Overland Engineer
Рет қаралды 13 М.
Overland Engineer
Рет қаралды 8 М.
Twisted Jake
Рет қаралды 20 М.
AutoRegionBA
Рет қаралды 2,8 МЛН
Zulfiqar Ali 1
Рет қаралды 38 МЛН