5 SIMPLE ways to improve greenstuff sculpting on your Warhammer miniatures

  Рет қаралды 77,283

SprayBlack Studios

SprayBlack Studios

Күн бұрын

Join me today for 5 simple ways to improve your greenstuff sculpting!
It's not the mystical art that many seem to think it is but it can be made much easier with a few easy tips!
________________________________
Support the channel by rocking some of our Merch:
teespring.com/stores/SprayBla...
All music courtesy of Epidemic Sound:
www.epidemicsound.com/referra...
______________________________________________
Please check out our social media pages!
/ sprayblackstudios
/ sprayblackrich
/ sprayblackstudios
______________________________________________
Proud Member of the Chilling Network
linktr.ee/ChillingWarGamers
/ discord
________________________________________

Пікірлер: 144
@kscott2655
@kscott2655 Жыл бұрын
Tip not included from professional sculptors that work in Green: always remove the middle part of the ribbon where the different putties touch. They will already have begun to cure in that area and those pieces will never mix properly. Just cut the central part of the strip out. It's best to completely separate the parts of the ribbon from each other. The epoxy putty can be frozen to preserve freshness for at least a decade.
@niksatt4843
@niksatt4843 Жыл бұрын
Explains that little hard piece in the rocks I made for my bases.
@Bunyip_Studios
@Bunyip_Studios 7 ай бұрын
don't buy the strips, get the sticks
@scottyboy6269
@scottyboy6269 5 ай бұрын
​@Bunyip_Studios strips with gap are an option now. And sticks cost about %60 more for some reason...100g tape $10 and 100g sticks $16.40
@lordhefman
@lordhefman 3 жыл бұрын
Vaseline is my choice for antisticking tools and fingers when using greenstuff. Although I would only suggest other "personal lubricant products" as an alternative if you are making a Slaanesh related model but they all seem to work. You just need something that clings to you and the tools and is oily. Although I have found it may get on the green stuff which may need to be re-adhered with super glue if it falls off. I made hats for some Ogryn and they stuck to the model initially but later fell off once solid but they were easily were glued back on.
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Yeah, you do have to be a little careful of getting the lubricant between the putty and contact surface of the miniature but as you say if it is solid then it's usually pretty easy to glue back on. Also I do actually know someone who uses "personal lubricant".....
@lordhefman
@lordhefman 3 жыл бұрын
@@SprayBlackStudios by the way, if you are curious here is one of said Ogryn. Well slave ogryn I decided my Necromunda gang would be based on Super Mario Brothers as I think a bunch of hulking plumbers jumping through pipes and stomping on large humanoid turtles makes since in the grim dark future of the 41st millennium. twitter.com/zaggrim/status/1407370805638467597?s=19
@julianmhu
@julianmhu 2 жыл бұрын
Tips - 02:48 Tip 1 - Use the right tools 05:16 Tip 2 - Keep your tools clean 06:32 Tip 3 - Keep them nice and moist 07:59 Tip 4 - Get the right mix 09:26 Tip 5 - Don't be afraid to let it cure!
@Karlmakesstuff
@Karlmakesstuff 3 жыл бұрын
Excellent tips; the one about letting it cure is especially important, and it really helps to plan ahead so you can work in layers. One thing to add to getting the right mix; greenstuff and milliput mix really well, so if you need to get some finishes that can be more annoying to do with greenstuff (like really sharp edges) throw some milliput into the mix and you should find it a lot easier.
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
That's another great tip! Sharp edges are one of those things that people really struggle with. Certainly one that took me a while to get right!
@FlorentWyne_
@FlorentWyne_ 2 жыл бұрын
May I ask what makes it more usable for sharper edges? I'm assuming it's the sandable quality of the milliput.
@Karlmakesstuff
@Karlmakesstuff 2 жыл бұрын
​@@FlorentWyne_ Heya :) Yes, sanding, filing or scraping milliput smooth is one of the easiest ways to get really crisp, sharp, regular edges. That said I haven't experimented with more recent epoxy putties, so there may be better stuff out there.
@FlorentWyne_
@FlorentWyne_ 2 жыл бұрын
@@Karlmakesstuff OK awesome, do you still need to be careful when sending the mixture? I know that people don't like sanding greenstuff due to the shavings being harmful.
@Karlmakesstuff
@Karlmakesstuff 2 жыл бұрын
@@FlorentWyne_ I wouldn't snort it for sure. Same as with any other fine particulate really, just make sure you give your work surface a wipe down when you're done and wear a filter if you're using a dremel. If you're sanding by hand the dust will be more contained but you can still wear a filter to be on the safe side. Shavings (as opposed to dust) aren't so much of a risk.
@demonicsuperiordruid
@demonicsuperiordruid Ай бұрын
I know I'm three years late to the party but I've just found this video! I've been struggling loads with greenstuff trying to replace a missing Death Guard bell from a model bought on eBay and this has helped so much, I was ready to call it quits and just buy a new model but this saved me, thank you so much!
@sebastianravnsnn2789
@sebastianravnsnn2789 2 жыл бұрын
This honestly helped so bloody much. As someone finally returning to the model aspect of the hobby, this has been something I've been keen on getting better at. Before taking a break about a decade ago, I got good with the whole "molten flesh" bit of sculpting, but always wanted to learn how to do things like, armor, hair and cloth, and this definitely helped tremendously. So, new tools ordered and hopefully we'll see some good results in the near future!
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
I'm really glad to hear that you've taken some value out of this video bud!
@EssexBoyz
@EssexBoyz 3 жыл бұрын
This was a very timely video, thanks. Just about to venture into sculpting for the first time. Very helpful and informative 😃👍🏼
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Perfect timing! Good luck, I have found that it's all about patience.... not something I had when I started out!
@DogsatrVIII
@DogsatrVIII 3 жыл бұрын
Fantastic video! I’ve been in the hobby for a while now and this is one of the most informative introductions to green stuff I’ve seen. Keep up the good work!
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Thanks bud! It's something I don't often see discussed so felt I had to put something out. I love sculpting and learning how to do it was a big turning point for me. Now to improve!
@bigbum3247
@bigbum3247 2 жыл бұрын
Thanks heaps for posting this. I lost a few decorative pieces in my box set and wasn't sure whether I could try and replicate something similar with green stuff. Will definitely give it a go now. I might try the jaffer cakes too.
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
You are welcome bud! Being able to Greenstuff those decorative pieces is huge for your kitbashing and converting skills! And Jaffa cakes are amazing.
@mstubbs88
@mstubbs88 2 жыл бұрын
Picking some up today! Gonna be making a joint for a death korps of krieg grenadier sergeant so hes got a more dynamic pistol pose. Thanks for the tips!
@Weapon_X_Wolverine
@Weapon_X_Wolverine Жыл бұрын
Thank you! This is great help and really makes me want to try the Green Stuff again!
@JamsMiniMods
@JamsMiniMods 2 жыл бұрын
Great video man.. I've been trying to up my sculpting game recently and there's some good tips here. Looking forward to more!
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
Awesome! Glad you enjoyed it! 👍
@GamingMediocrity
@GamingMediocrity Жыл бұрын
Isn't it weird how everybody has a different experience with certain tools. I bought the silicone tipped shapers and the wax tools together on Amazon back when I started. Can't stand the wax tools, but I've managed to create my own detailed sculpts (entire miniatures, mind you) with the silicone tipped tools. The wax carving tools are great for hard lines, but I'm not gentle enough to get mileage out of them on detailed sections. Great video btw
@theghoultaker7624
@theghoultaker7624 Жыл бұрын
WOW I didn't know that! Thank you for showing me the tips of how to use green stuff. I'll try to remember next time, thank you Sprayblack Studios.
@OriginPainting
@OriginPainting 3 жыл бұрын
Nice tips. Im going to be starting on some Custodes and have some plans to make a lot of cloth so this will come in handy!
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Oh nice! Will look forward to seeing what you do with the Custodes! Cloth can be a nightmare and definitely involves a fair bit of practice but it's so worth it!
@saviorchief3651
@saviorchief3651 2 жыл бұрын
Dropped a like and subbed. Ive always been so fascinated with sculpting and now I can learn!
@scotthughes4695
@scotthughes4695 2 жыл бұрын
Awesome tips. Haven't learnt so much this quick in a while. Thanks heaps.
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
Thankyou! Happy to help!
@Sinewmire
@Sinewmire 2 жыл бұрын
I've always dreaded Greenstuff, never been any good at it. Even routine gap filling is terrifying, so thanks for the suggestions here.
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
It's all about practice bud, we all struggle with it at first! Just gotta take small steps
@carpangler6172
@carpangler6172 Жыл бұрын
I have been using this for my halo figures this was really helpful.
@pistol0grip0pump
@pistol0grip0pump 2 жыл бұрын
Paid in Jaffa Cakes, this is a powerful psyker.... Seriously though, thank you for taking the time to share these tips =)
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
Jaffa Cakes fuel all of the good conversions!
@novaseaker
@novaseaker Жыл бұрын
Saving video for future use!
@butdoesitexplodevids2886
@butdoesitexplodevids2886 3 жыл бұрын
Cracking video. Definitely solid tips for getting the putty work looking tight
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Thanks buddy! Really it's all about the Jaffa!
@DabbleDo
@DabbleDo 2 жыл бұрын
Thanks for the tips! I'm finally pursuing my dream of converting a Death Guard army from 40k history, back when the Chapter was first inflicted by Nurgle. More Space Marine bits, original gray Death Guard color scheme, smoother armor with less Chaos-y spikes and such, and lots of green stuff pustules...
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
I've seen a couple of people do very similar to this and it works really well. I'd love to see what you come up with!
@jasonbrown9
@jasonbrown9 Жыл бұрын
Super helpful! Thank you!!
@awesomenesschanel
@awesomenesschanel Жыл бұрын
great video, thanks for making it!
@Chef_PC
@Chef_PC 2 жыл бұрын
We always had to get our tips from the train hobby books at the back of the Hobby Shop and from the occasional art book in Waldenbooks.
@crazygeordie1383
@crazygeordie1383 2 жыл бұрын
i remember them days when i was back in newcastle still got most of my old school minis
@J0hnnyTheKid
@J0hnnyTheKid 2 жыл бұрын
Thank you 😊
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
You are welcome!
@VividMiniMods
@VividMiniMods 3 жыл бұрын
Great tips, mate. Never thought of using saliva as a lubricant. Epoxy flavour tier list, when?
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
I'll definitely have to spend a little while doing the research for that one! I currently only have Greenstuff world's and Milliput..... will try some other brands!
@thehonestaspy102
@thehonestaspy102 2 жыл бұрын
This is so helpful thank you!
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
Glad you enjoyed it!
@FrostandFists
@FrostandFists 3 жыл бұрын
Awesome tips, my man! Great video as always! ~ Wolfbrother Methos
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Thanks buddy!
@mxferro
@mxferro 2 жыл бұрын
Vaseline, Canola oil, and personal fav. COCONUT OIL are great for keep it from sticking too much to your tools.
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
I've not tried coconut oil, will definitely give that a shot!
@AVspectre
@AVspectre 2 жыл бұрын
Really helpful - thank you!
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
You are welcome!
@nian89
@nian89 10 ай бұрын
This tutorial was excellent :) I am a bit scared of starting with greenstuff because I am afraid I will mess it up, but I think I feel a bit more secure now
@MrYib
@MrYib 2 жыл бұрын
Video wasn't what I was looking for on this occasion but it's a great set of tips for beginners.
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
Thankyou!
@elstonation
@elstonation 3 жыл бұрын
Jaffa cakes for the win!!! Good video dude, I'm sure this will help a lot of people with their sculpting
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Thanks bud! It's all about the Jaffa cakes!
@gruvee9334
@gruvee9334 2 жыл бұрын
Thanks!
@Edwoodb3
@Edwoodb3 2 жыл бұрын
Thank you for the tips, where do I send the Jaffa Cakes? I've always been a bit worried about starting to use green stuff. It's that whole wanting to run before I can walk mentality.
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
You are welcome bud! You need to keep the jaffa though..... otherwise you wouldn't have as much inspiration! A lot of us get the whole "run before I can walk" mentality and get frustrated about not being able to do more advanced stuff early on. Just gotta take your time though!
@miguelochoabotero3588
@miguelochoabotero3588 3 жыл бұрын
Amazing video, thanks! subed!
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Thankyou Miguel!
@krelekari
@krelekari 2 жыл бұрын
this is my first day using green stuff and i didnt have tools so I used a toothpick, it worked WONDERS because if you rolled it as you pressed or tried to guide the putty it wouldnt stick fully and instead just help ease the putty with what grip it does have
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
For sure bud! Expensive tools definitely aren't essential as long as you are working with good technique!
@waynewayoaveyard9397
@waynewayoaveyard9397 2 жыл бұрын
Ive just got back into 40k myself after around 17 years.. hence why im youtubing green stuff to see if its still the go to epoxy sculpting putty for warhammer. it is kind of upsetting that the "make an original army" way of thinking has being lost and people are happy with 3 colours or sticking to the box art. its like myself ive just got back into 40k after seeing that the custodes are now an army (late to the party i know!) and bought a a few warden set and the first thing i did after part gluing some of the figures together was throw away the instructions, swap parts around, chop bits up and change stances. making a figure/army that cannot be bought is one of the most rewards things about this hobby... my first ever conversion was a "winged-demon chaos dreadnought" that had wings from a the malekith dragon from fantasy also used its claws and horns... admittedly it wasnt that good and back then cost me an arm and a leg to make but i was so proud of it.... this was before the tau army was even a thing😂
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
Great to hear that you are back in the hobby! There still are a few of us around that love a bit of converting/kitbashing but we are a bit more rare than we used to be! Custodes is a great choice to get back in with, not many models but oh man they are good....
@waynewayoaveyard9397
@waynewayoaveyard9397 2 жыл бұрын
@@SprayBlackStudios I guess im back rep'in the old school! hahaa. yeah, after a few hours looking on youtube it does seem that we are a dying breed or atleast a rare one. in all honestly i went custodes because i remember reading about them years back and the army of the ten thousand... just had to get my hands on them when i walked past my local games workshop and do a solar watch army but with my own twist. but the main reason is like you say they dont have many models so any changes are noticeable and following the lore each and every custodes is comparable to a hero of sorts so customising them will be a dream especially when most are just happy with them out of the box. if anyone else read this and is thinking about getting into customising please do! it makes the hobby so much more better seeing other peoples work!
@26snoopy82
@26snoopy82 2 жыл бұрын
I learned a lot from this video.
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
I'm really glad to hear this!
@sebanna2002
@sebanna2002 3 жыл бұрын
I'd love a video tutoriel on how to convert the primaris with the greek armor-like torso ! (I have only a few of them and I'm to afraid to waste them)
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Funny you should say that..... if you look through my videos I actually have a video on how I converted some Sanguinary guard into Primaris!
@sebanna2002
@sebanna2002 3 жыл бұрын
@@SprayBlackStudios Somehow I missed that, thank you for pointing it out, awesome tutorial
@mitchellrobins7482
@mitchellrobins7482 2 жыл бұрын
Keep then nice and moist followed by an advert by cex! Nice
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
Targeted adverts! 😂
@CyrlNish
@CyrlNish 3 жыл бұрын
well presented tips, enjoyed style :) Question is: how do you eat your jaffas, whole bites or deconstructed?
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Thankyou! To be honest this depends on many factors, if there is milk then it's all about the dunk and deconstruct!
@Nat1videos
@Nat1videos 3 жыл бұрын
Great video :) I could have used this video a week ago lol
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Thanks buddy! Haha for future reference then!
@Dimetropteryx
@Dimetropteryx 2 жыл бұрын
Practice? Thousands of hours? And here I am with a project that I have one chance to get right. ;)
@TheImmersiveWorldCrafter
@TheImmersiveWorldCrafter 3 жыл бұрын
Jaffa, Jaffa. Jaffa, Jaffa. I nice little primer on how to start out the right way.
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Thanks bud! The Jaffa is obviously the most important part!
@robertevans3173
@robertevans3173 2 жыл бұрын
Any tips for Iron Hands conversions? Any help would be appreciated.
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
To be honest the Iron Hands upgrade sprue is very much your friend, otherwise there is a tonne of stuff in the Admech range that can work well (Bionic legs, arms etc)
@almullin5757
@almullin5757 3 жыл бұрын
Damn wish I’d seen this before I sculpted some fur on my cursed city baddy model, it turned out ok but now I think it could have been better
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Ahhh that always happens to me! Hopefully you'll remember the tips for the next time you attempt some sculpting! 🤞
@jiubcygnus8002
@jiubcygnus8002 7 ай бұрын
there's our accredited, eh? he would love machinen kreiger. i kinda wanna see him.
@hellyeahtehmeh
@hellyeahtehmeh 3 жыл бұрын
mate i was literally looking at requiems dark angels and thought shit i wanna learn this!
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Haha yeah his work is ridiculous!!
@kamehame3959
@kamehame3959 3 жыл бұрын
Great Tipps! My Problem is that my Greenstuff won’t get hard. I used it 48 hours ago and still get scratches inside it. I used 60 blue and 40 yellow. Did I do something wrong?
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
That sounds quite strange to be honest! Whilst when set it can scratch a little if it's not curing fully then I expect it may be either a different chemical makeup or possibly not mixing fully
@xenoserum
@xenoserum 3 жыл бұрын
Yeah we use to bribe Chris Fitzpatrick with Jaffacakes... Question for you if able... How best would you green a collar onto something like a Warg or Wolf?
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Ooooh! Not something I have tried but personally I'd probably attempt making a nice flat rectangle, try and lay it around the area and then gradually work it down into the fur. Then finally tidy up the shape as required and add more material to the bits that require it. It would likely just require a lot of patience and careful adjustments!
@xenoserum
@xenoserum 3 жыл бұрын
@@SprayBlackStudios Cheers I come up with stupid projects and then think how the hell am I going to do that (like converting epic scale bikes hehe) I'll give it a go see what I can do hopefully will look semi ok :)
@OEFarredondo
@OEFarredondo 3 жыл бұрын
I’m trying to make chest rigs and pic look for my minis
@lulzguy2501
@lulzguy2501 2 жыл бұрын
came for the green stuff... left wanting Jaffa Cakes
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
If Jaffa Cakes don't sponsor me then I'm definitely doing something wrong....
@darkojovanovic5637
@darkojovanovic5637 3 жыл бұрын
Nice Video but were are the Grimdark Iron Warrios?
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Thanks! Don't worry, they'll be coming... just gotta be patient!
@sparkycalledmarky
@sparkycalledmarky 3 жыл бұрын
I can't stand Jaffa Cakes. Is there another method I can use or am I going to have to get used to my tongue curling?
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
There are a few other acceptable alternatives but none of them work quite so well as the Jaffa! Chocolate Hobnobs can also work.....
@sparkycalledmarky
@sparkycalledmarky 3 жыл бұрын
@@SprayBlackStudios Mmmmm Hobnobs! I'll give them a go first!
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Haha let me know how they work for you!
@pablomontanaofficial2269
@pablomontanaofficial2269 2 жыл бұрын
I buy mine for Jonah jameson figure from marvel legends to make hair on. And it’s super difficult 😞 The green stuff is super sticky on tools …
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
If you are struggling with it being too sticky then you need to make sure you are working with the tools nice and wet. This will prevent it! 👍
@loupiscanis9449
@loupiscanis9449 3 жыл бұрын
JAFFA's , hummmmm Thank you Capt Black ,
@loupiscanis9449
@loupiscanis9449 3 жыл бұрын
Still didn't see any wolves , :-) .
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Jaffa's are essential! Haha the Wolves are coming..... just need the right model!
@JMcMillen
@JMcMillen 2 жыл бұрын
Oh you youngsters remembering the days of pewter... while us elders risked our lives working with lead. 😜
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
I do still have a handful of lead minis.....
@Brucifer2
@Brucifer2 3 жыл бұрын
Me reading tons of warnings to wash your hands immediately after using: Wow this stuff must be very toxic! Video: Licks between uses.
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Haha well I am definitely still alive and kicking! Just don't eat it.....
@georgep6495
@georgep6495 3 жыл бұрын
"Tip number one - as with many things in life..... Lube is important" I would have bet my life savings thats how the sentence would finish - I feel upset it didnt :(
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Haha sorry! I worry I may get demonitised if I had said that! 😂 It's pretty true though!
@georgep6495
@georgep6495 3 жыл бұрын
@@SprayBlackStudios Good content tho, subed =)
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
@@georgep6495 thankyou! I'm glad you enjoyed it! 👍
@dasnoworrunts6779
@dasnoworrunts6779 3 жыл бұрын
Tbh ive seen green stuff alot an had no clue what it was
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Well now you know!
@9171paladin
@9171paladin Жыл бұрын
. . . . no cakes.
@stephenrider6107
@stephenrider6107 3 жыл бұрын
3d printing is doing zero favors for green stuff too!
@VividMiniMods
@VividMiniMods 3 жыл бұрын
I tend to find 3d printing good for larger pieces, but it lacks the subtle detail of greenstuff. The more tools under your belt the better though, that's my opinion 👍
@stephenrider6107
@stephenrider6107 3 жыл бұрын
@@VividMiniMods 100% agree!
@SprayBlackStudios
@SprayBlackStudios 3 жыл бұрын
Agreed! The ability to sculpt well is definitely being lost with all the new technology coming out but personally I find it super rewarding knowing that I've sculpted something rather than just printing it off and sticking it on 👍
@crowdemon_archives
@crowdemon_archives 3 жыл бұрын
Why not get the best of both worlds: Print parts, and then sculpt the parts into the model
@user-zf5ul7ho6n
@user-zf5ul7ho6n 3 жыл бұрын
やっぱりこいつも唾液なめなめしてんじゃあんか…。😨
@KeeperPlus
@KeeperPlus 11 күн бұрын
Just tried the stuff. Didn't care for it. Doesn't stick to anything
@andrewhansen9582
@andrewhansen9582 2 жыл бұрын
Your intros are torture. Good video but cut down your intros by like 2 minutes. I'm betting most people don't make it past 1:25
@SprayBlackStudios
@SprayBlackStudios 2 жыл бұрын
Sorry you didn't enjoy it!
@plezmybob
@plezmybob 2 жыл бұрын
When you put your tools in your mouth 🤢🤮
@marcvesin
@marcvesin 2 жыл бұрын
first tip: don't put tools, pen nor fingers in your mouth
@lewisramsden7645
@lewisramsden7645 Жыл бұрын
Underwhelming video rubbish a bit lackluster was no enthusiasm
@snowrunetunes6252
@snowrunetunes6252 2 жыл бұрын
had to quit watching, that song was about to kill me
How to SCULPT a MINIATURE (in Green Stuff)!
20:54
TheCrafsMan SteadyCraftin
Рет қаралды 62 М.
Sculpt Viking Beards and Hair With Green Stuff
32:53
Valbjorn
Рет қаралды 79 М.
Khó thế mà cũng làm được || How did the police do that? #shorts
01:00
Children deceived dad #comedy
00:19
yuzvikii_family
Рет қаралды 6 МЛН
БОЛЬШОЙ ПЕТУШОК #shorts
00:21
Паша Осадчий
Рет қаралды 4,8 МЛН
터키아이스크림🇹🇷🍦Turkish ice cream #funny #shorts
00:26
Byungari 병아리언니
Рет қаралды 27 МЛН
Learn to sculpt with Green Stuff!
10:25
The All-In Nerd
Рет қаралды 52 М.
How to use Milliput to fix everything! BIG trick!
8:09
MarcoFrisoniNJM
Рет қаралды 232 М.
Sculpting with Epoxy Putty (AKA: "Green Stuff")
16:28
Jazza
Рет қаралды 1,5 МЛН
How to SCULPT CLOTH AND CAPES like a PRO!
14:51
JuanHidalgo Miniatures
Рет қаралды 54 М.
HOW GOOD is Molding and Casting with "Blue Stuff"?...
14:11
Tabletop Time
Рет қаралды 188 М.
I ordered 15 Warhammer scams on AliExpress
20:59
Squidmar Miniatures
Рет қаралды 383 М.
Kitbashing and Converting - STOP DOING THIS :Þ
6:51
Trovarion Miniatures
Рет қаралды 153 М.
Stop Wasting Your Time - The Only Technique You Need
7:34
Zumikito Miniatures
Рет қаралды 91 М.
Hobby Cheating 50 - Basic Greenstuff Techniques
20:08
Vince Venturella
Рет қаралды 60 М.
Survival skills: A great idea with duct tape #survival #lifehacks #camping
0:27
Alat Seru Penolong untuk Mimpi Indah Bayi!
0:31
Let's GLOW! Indonesian
Рет қаралды 10 МЛН
Qual ELEMENTO é Melhor para ESCAPAR😱 #shorts
0:26
Lucan Pevidor
Рет қаралды 4,5 МЛН
Дроны отбирают работу у грузчиков
0:15
Короче, новости
Рет қаралды 10 МЛН
Сынок не послушал свою мать..😱🚣‍♀️⚓️
0:29
Connoisseur BLIND420
Рет қаралды 1 МЛН
Survival skills: A great idea with duct tape #survival #lifehacks #camping
0:27