Just bought this camera! Was thrilled to realize I had the version with the 72mm and variable f stop. Excited to use it! Thanks for the intro
@mkshffr4936 Жыл бұрын
I have one of the fixed focus versions. I am excited to play with it since you can now get 620 film again. I have some ideas for rigging it up for filters and cable release to increase the flexibility.
@terrywbreedlove2 жыл бұрын
I have the Dualflex III but it looks a little different and has three Apertures F8 F11 F16. I have an old expired roll of re-spooled 120 Tmax 100 in it. I will be shooting over the next few days and I hope to have images to post to my IG. I had to trim a plastic 120 roll for the take up. Kind of worried it may be a tight fit by the end of the roll but we will see. :)
@52cameras542 жыл бұрын
You have the more sophisticated Duaflex. I was offline for quite a while so you've probably gotten results by now. How did it go?
@crsantin Жыл бұрын
I found my grandfather's Duoflex III in a box recently. He died in 1978. It's in pretty good condition considering he bought it in the 1950s and it's been sitting since. I think I have the camera figured out and how to modify the 120 film spool to fit. One question, how do I know how far to advance the film after I've taken a shot? Does it stop automatically like a TLR or do I have to check the red window for the next number? I'm looking forward to using it and seeing what I get. If it's still in working order I would love to shoot with it regularly. It's great to have something like this from my grandfather all these decades later.
@colecasper106 ай бұрын
Hello sir hope you are still running the channel. I have that adjustable version of 8, 11, and 16
@rachelchang20956 жыл бұрын
I was wondering how you inserted the empty spool into the upper recess (take-up side)?
@52cameras546 жыл бұрын
Hi, you pull out the winding knob while twisting clockwise. Then you can put the spool on the photographer's left side and push in the knob, also twisting clockwise. Mine was pretty stiff so the twisting is important when pulling it out and pushing it in. Remember, a 120 spool won't fit -- it has to be a narrower, slightly shorter 620 spool. I hope this helps.
@rachelchang20956 жыл бұрын
Thank you, super helpful! Yes - I was afraid to pull too hard at the winding knob. I was able to put the spool in the take-up side.
@dylanhutson3745 жыл бұрын
What film ISO would you recommend for this camera?
@52cameras545 жыл бұрын
Hi, The shutter is really slow so stick to ISO 100 if you can. Thanks for watching!
@bob781453 жыл бұрын
How much are they worth?
@52cameras543 жыл бұрын
Not much. $20-50 US depending on condition, if it has the flash, a case, etc. Check eBay and then scroll down and check "Sold Listings" to see what they are going for.