How to: Complete Wheel Restoration. Prep & Paint = Professional Results at Home
Рет қаралды 1,539,910
2 жыл бұрынProducts Used
Acid Wheel Cleaner: amzn.to/3FjHz26
3m Sanding Sponge: amzn.to/3ApcNBc
220 Grit Sand Paper: amzn.to/3iGlwZW
400 Grit Sand Paper: amzn.to/3Fp1qNx
DupliColor Prep Spray: amzn.to/3uP7xWm
DupliColor Self-Etching Primer: amzn.to/3lku7mH
DupliColor Filler Primer: amzn.to/2Yq5xI3
DupliColor Primer Sealer: amzn.to/3AgNuRL
DupliColor Chrome: amzn.to/3Fu6zDR
VHT Plate Finish: amzn.to/3AkLatg
VHT Cast Aluminum Caliper Paint: amzn.to/2YvYOw4
DupliColor Silver Wheel Paint: amzn.to/3oGZJVR
DupliColor Graphite Wheel Paint: amzn.to/3anZrdP
DupliColor Gloss Clear Wheel Paint: amzn.to/3Agbe8R
Rustoleum Gloss Black Enamel Paint: amzn.to/3FtdxJi
Yellow Carnauba Wax: amzn.to/3uOQzaR
Mineral Spirits Paint Thinner: amzn.to/3mwMzYO
Tack Cloths: amzn.to/3AjQDAn
Half Mask Respirator: amzn.to/3BlFWP9
Aerosol Can Squeeze Trigger: amzn.to/3gWrg05
Since making this video, I have found better Clear coat options:
Spraymax 2k Gloss: amzn.to/43KbyMK
Duplicolor 1K Gloss: amzn.to/3UKXheM
Duplicolor 1K Matte: amzn.to/3A5i6rY
Today I’ll show how to restore old corroded crusty aluminum alloy wheels with aerosol spray paint, and even using can of paint and a brush for the accents.
I achieved professional results with a mix of different products that were never designed to be used together, right at home in my garage.
No compressor or spray gun equipment needed!
For the 5 wheels, I probably used about 2.5 cans of the Self Etch primer, 1-2 of the filler, 1 of the sealer, 2 of the DC Silver, 2 of the VHT Silver, and 5-6 cans of clear total.
I don't have Patreon or ask for donations but you can support the channel with some rad gear from my store: 6thgeargarage.com/merchandise/
Follow Us:
Instagram: 6th_gear
6thGearGarage
@gregt722 2 жыл бұрын
This is, by far, the best wheel painting video on KZfaq. I’ve watched hundreds, and while there are lots of great videos, this one is in depth yet extremely simplistic. Your narration and explanation sounds like it was professionally produced. Well done and the wheels look like new! I also enjoyed your reaction when your son made his cameo! 😂
@cg3372002gmail 2 жыл бұрын
9⁹⁸
@SG901 2 жыл бұрын
i fully agree. learn from eachother. greetings from belgium
@tomherver2083 2 жыл бұрын
0
@MySmartech Жыл бұрын
Absolutely. Simplistic. In detail. And you narrate so fluently. No fumbling. No repeating or boring us with unnecessary info. Even when yor son walked in you never spend a whole 10mins on him, ack owledge his presence n then got on with the job. Very professional. I'm a subscriber. Happy one too
@dangoodey1664 Жыл бұрын
00
@nasserkaouk Ай бұрын
I painted for about 36 years. The self etching primer is an acid and is not made to be sprayed to cover. One light coat is all you need. If you need to cover things up like scratches or plastic filler you will need to use a regular primer like a lacquer primer or a 2k primer for example.
@christierella 11 ай бұрын
I’m just an old lady that has more time than money, you’ve inspired me. I’m gonna give it a go, nothing to lose. Thank you.
@flexapex9801 Ай бұрын
You’re a classy lady
@grimspec106 2 жыл бұрын
This is exactly what DIY content should look like. No expensive tools. No difficult processes. This man not only gives clear and concise instruction but could very well be the hero we all needed to save our stock ish builds. Is it the "right" way probably not. Is it the "best" way again probably not. Is it something that every single person that watches this video is capable of doing in a lasting and good looking way if they take their time; abso(expletive)lutely. This is great. I wish I would have had the motivation to figure this out or the information to solve this problem years ago. 99% of us are doing 1 of 2 things. Living with the problem or replacing the wheels. I have lived in both scenarios. Thanks to 6th Gear Garage keep it up brother. You have my attention.
@6thGearGarage 2 жыл бұрын
Thank you for the encouraging words! That was my goal- to show what is possible in an ordinary garage, on a budget. Thanks for watching. I just finished the center caps the other day and will have that video up next week.
@dirtyhobo4252 10 ай бұрын
@6thGearGarage to be fair you had a buddy sand blast the rims for beer. How much would that cost for people without the tools and without the friends? Not criticizing, just asking.
@mgrdigimarketing3035 3 ай бұрын
Obviously DIY mean DUDE IT YOURSELF, seeing as sand blaster dude got involved 😂
@bjones6761 2 ай бұрын
@@dirtyhobo4252it’s a service that’s available to those that can accommodate it into their process. Otherwise, OBVIOUSLY, there are alternate methods.
@sgt_loeram1933 8 күн бұрын
Actually makes me happy I live in California, well almost happy
@6thGearGarage 7 күн бұрын
Yeah I need to shop for vehicles and parts out in CA.
@Sstantial 2 жыл бұрын
Great video!!! Better part of 20 years ago I worked for an aircraft component overhaul facility that did wheels, brakes, and landing gear. That summer I worked the paint shop and learned a lot of the basic rules you mentioned. I did mostly aircraft wheels and an awesome trick I'd like to share is... Buy a cheap "lazy Susan" which is a circular set of bearings and cut some plywood into circles a few inches larger than the wheels. Install the lazy Susan on the bottom. Now you have a ideal "base" to put the wheel on!!! Spray can in one hand, and turning the wheel with the other. You can now spray continuously without stopping and it will cut your spray time immensely!!! Another good tip: When your finger gets tired, I simply swap to using my thumb!!! I have found that I have similar "dexterity" and that thumb is way stronger than my index finger. Years later I started doing my own car wheels. I bought my own (old) commercial sandblast cabinet (2x4x4 dual entry), an old industrial air compressor, and I bet I have now refinished roughly 25 to 30 wheels over the course of the past 8 years now. It's a super fun hobby and very rewarding! My next step is getting into a set of HVLP spray guns like I used to use in that actual paint booth all those years ago...
@6thGearGarage 2 жыл бұрын
Now the lazy Susan idea in genius!!
@thomasarussellsr 2 жыл бұрын
Love the lazy-susan idea. Practice with the thumb is paramount, the added strength of that digit could result in over-sprays.
@jameskirk3 2 жыл бұрын
Always just made a mount for them, but yeah spinning the wheels with either a lazy Susan or something homemade will help a lot if you restore wheels as a hobby or professionally.
@jameskirk3 2 жыл бұрын
A $20 spray gun works just fine for a while, the paint is the deciding factor, but engine enamel works well too. Clear coat is necessary in my opinion.
@immanueldelcastillo6041 2 жыл бұрын
I currently work on aircraft wheels as well. We also use the lazy susan. The sandblasting machine gave me tuberculosis. 😂
@kckettridge 6 ай бұрын
Well done! The rims look better than some I have seen that were refinished by so called "professional" wheel refinishers.
@johnlivingston9217 8 ай бұрын
Thanks for the humor, man. Good to have a laughter after a long day of work.
@nunyabiznez3584 Жыл бұрын
They look awesome! Well done. I have painted many wheels in the last 40 years, but never put as much effort as you have here. You have taught this old dog some new tricks to utilize when I tackle the next set! Thanks!
@TheRealCheckmate 2 жыл бұрын
*After watching this, I feel much... older now.*
@jimzivny1554 2 жыл бұрын
I lived in NY for 60yrs, I feel your pain! Nice job restoring the wheels. Good tip with the spray can top for cleaning brushes
@MichaelRobinsonglass 13 күн бұрын
I need to refinish the wheels on my XJS, thanks for the help and inspiration.
@6thGearGarage 13 күн бұрын
You're welcome!! Best of luck!
@jasonkelley6185 2 жыл бұрын
They look absolutely fantastic on the vehicle man. What a difference! I don't know if I would say "professional results" with the scalloped edge insets, but who cares. They made the truck look great.
@Adrian-qc7ky 2 жыл бұрын
I love the look of those rims, you've done a great job man.
@jeffreykbevins7116 2 жыл бұрын
Thanks!!! A great informative video, and you did a great job. I want to do this to my 1987 F150 4x4 factory wheels. So this video has given me some good points, to do a good job. And I would love to see a video about how that you did the high polished wheels. I will be looking for more videos from you. Be careful and stay safe. As always, Jeffrey !!!
@mickfitchettchristine115 2 жыл бұрын
The amount of work you did was well worth it. Looks real good.
@docolemnsx 2 жыл бұрын
Great choice of music!
@opinionated_one8692 2 жыл бұрын
Love it when skilled people share theirs on here, whether they were trained or have learnt themselves by trial & error. It's very refreshing to learn or even gain the confidence do do a job yourself, knowing you can possibly do it, but need that little extra support, without having to fork out mega bugs to have it done for you. Thank you for your perfectly narrated & videoed step by step honest, real, informative video. It must of been good to keep me watching for nearly an hour Lol. Cute kid, future helper... Nice one 🙂
@Floridacarfishing Жыл бұрын
This is why I love KZfaq.
@MrRodolphec 2 жыл бұрын
Thank you very much for the thorough step by step. You have high skill and wishing you the best. Thank you Rudy
@babycakes8434 13 күн бұрын
You can use dish sponge too👍
@akira5982 2 жыл бұрын
Shouldve ditch that etch primer as its porus & old school, epoxy primer provides a better bite & protective barrier right on the ally
@ctb619 Жыл бұрын
Right on the ally?
@jeffscott3160 2 жыл бұрын
Wheels came out looking great. I hope they last a while. Duplicolor isn't known for holding up to the elements for very long, especially on something that takes a beating like wheels. If I went through all that work I would have used a good urethane base coat and a 2k clear coat like the factory. Both are available in rattle cans too.
@6thGearGarage 2 жыл бұрын
I would have done a 2k clear, but urethane shouldn't be applied over enamel, or it can cause the paint to lift. I will use 2k on other wheels in the future where I don't use any enamel paint.
@2ndborn186 Жыл бұрын
@@6thGearGarage Not true. I restore motorcycles. Spraymax 2K works great over enamel. I use it clear coat Rustoleum all the time.
@6thGearGarage Жыл бұрын
@@2ndborn186 Good to know, thanks!!!
@rickreese5794 Жыл бұрын
See it in eastern WA. too.😊
@davida871 Жыл бұрын
Very helpful tips. I've done one set and now through trial and error I can get much better results thanks to your video. I like the filler primer to fill imperfections. You can use a glaze putty on road rash dings that won't shrink too. Thanks 👍
@averagejamaican 7 ай бұрын
Loved how much attention was paid to detail despite it being a garage project. Nice finish.
@6thGearGarage 7 ай бұрын
Thanks!
@randyfowler6928 2 жыл бұрын
Should paint Toyota in red
@alexparker3263 2 жыл бұрын
By far the best video I've found. And just so happens I'm using the same colors. Much appreciated
@MrTapanes Жыл бұрын
Wow! What a detailed and informative video. A lot of really great tips and tricks that I will be employing in my wheel repaint. Thanks so much!
@Wirmish 2 жыл бұрын
Removing rust... without getting tired. A small container with molasses. Drop the wheel inside. Put a cover on the container. Wait 2 weeks. Take out the wheel. Rinse with water. And voilà. No rubbing. No more rust.
@6thGearGarage 2 жыл бұрын
Excellent! I've done it using electrolysis as well and will have a future video on that process.
@thomasarussellsr 2 жыл бұрын
That is a lot of molasses, to cover a rim. And two weeks? That's ten weeks to do five rims, or quite a bit more molasses and several containers. And the molasses is basically useless for anything else afterwards. I suppose if you do rims a lot, and you have room to keep tubs or drums of molasses stored, it would be okay.
@SammLloy481 2 жыл бұрын
If you use a high velocity urethane spray it won't dull the reflective shine on piece your painting..same thing they use on guitars for a very high Sheen..
@6thGearGarage 2 жыл бұрын
The only issue was that chrome paint was an enamel, and urethanes can cause enamels to lift. I'll have to find something reflective like that in a lacquer or urethane to be able to put urethane over top. I'd prefer urethane over enamel any day.
@thomasarussellsr 2 жыл бұрын
@@6thGearGarage clear epoxy flood coat?
@karpilin 2 жыл бұрын
This is brilliant! Every imperfection on the final result can be traced back to the a step mistake was made and then learned from. If one is happy with the result, then just follow the steps in the video, if you feel that the result is not good enough, either trust it to professional refurbishers, or rethink some of the steps.
@frankjacoby9460 2 жыл бұрын
Thanks, best wheel restoration video on KZfaq;
@rideon6839 Жыл бұрын
Those little lines that you see on your wheels from the lathe are what is called tooling marks. It's where the cutting tool made it's path during the machining process.
@2ndborn186 Жыл бұрын
He said that
@ironvoice5079 2 жыл бұрын
those wheels look really good. In my experience those can paints get scratched so easily, so much work just to see them scratch rather quickly.
@6thGearGarage 2 жыл бұрын
Thanks... I would have used a 2k clear, but I read that it could cause the paint to lift when sprayed over enamels.
@jagtan13 2 жыл бұрын
I just used some rustoleum matte clear on my truck's wheels holding up even after 2 years. It's all in the prep. Also let them cure for 2 weeks. Had another set of wheels at the time.
@slimmszn6949 2 жыл бұрын
A great way to keep the wheels from scratching or lifting due to the clear coat issue, Use a professional grade ceramic coating for the wheel faces !!!! Would have a 10h hardness and last for a good 3 to 5 years . Also helps protect from brake dust and environmental fallout!
@neilbenjamin9028 2 жыл бұрын
@@6thGearGarage yes, don't EVER 2k with enamel
@Lvatopesado Жыл бұрын
@@6thGearGarage - Not if you apply the clear right after spraying the enamel.
@stephendavidcavuoti6548 9 ай бұрын
You’re so Right they do look good with just primer !
@LeonVisnaw Жыл бұрын
Wow, the work is crazy impressive. When I get over the shock I plan to do the rims on my 93' Miata. Thanks for the tutorial.
@davidbarnsley8486 2 жыл бұрын
I usually have a small cup with thinners in and drop all the paint nozzles in to keep them from blocking up Maybe try that Just use thinners not turps based it cleans so much better You needed to do a guide coat when sanding the filler and then you would see all imperfections They do look good Scratches ar,e always a problem with painted wheels
@Sigspearthumb1 2 жыл бұрын
Looks really good! Gonna try it myself. For what it’s worth, I would like to see a paint job with an air compressor. Would the process be much different if the wheels were on the vehicle?
@6thGearGarage 2 жыл бұрын
You'd really be better off removing them for painting to avoid overspray on the brakes, plus doing all that work on the dusty ground where you'll be hunched over isn't worth the time it takes to remove the wheels. You don't have to dismount the tires, you could mask those off.
@gregt722 2 жыл бұрын
If you want a professional job take the wheels off and follow this video. I find Spray cans much easier than a compressor. I’d only consider leaving wheels on if you don’t care about the finish and are putting hubcaps on.
@jussiketels151 2 жыл бұрын
Thanks for the video , the result for a DIY in a garage, is really good, but also a lot of work!!!
@denniscaulfield7480 2 жыл бұрын
looks great, I did my window areas with a brush too.
@theshopspot9053 2 жыл бұрын
Nicely done!!! Looks awesome dude 🤙🏻 glad I could help ya get em done quicker!
@thomasarussellsr 2 жыл бұрын
This has to be the longest spray paint video I've ever watched, all the way through. And that, sir, is a high complement. Well done, and so sorry about the damage the tire counters did to your rims, from a guy who used to work mounting tires from 12" car tires all the way up to big rigs, farm tractors, and earth moving machinery. There really is no excuse for it other than laziness and apathy. Done correctly, the machinery used for mounting those tires should never damage the rims or even a spray painted finish. BTW, in the future, when testing a new method, like brushing on the recessed black sections, start with the designated spare like you had in this set. The lessons learned on the first wheel can then be carried over to the mounted wheels. (Just a thought.) Nice looking wheels, and great video. Well done.
@larrytemen4789 8 ай бұрын
6:12 for aluminum, you should actually use an iron oxide primer. The coating will last a lot longer.
@6thGearGarage 8 ай бұрын
Thanks for that tip!
@BrightEyes8513 Жыл бұрын
Man did I find the right channel. You’re doing it right my guy. Highly appreciative of the knowledge you’re sharing
@6thGearGarage Жыл бұрын
I appreciate that!
@jr75848 2 жыл бұрын
I have (4) of almost the same style wheels except they're the spiral teardrop type. They've never been in salty weather since I live in the west coast. I was thinking of selling them as is and getting a few bucks for them but your tutorial makes me want to redo them. They're the 6 lug that came from my pre 2000 Toyota Tacoma and the only reason I had to replace them was because Discount Tire supposedly "doesn't carry" the Michelin Defender series tire in that size so I had to go a little bigger. Personally, I think they were just upwelling me which I bought into because my wheels were looking very worn and I wanted new ones anyway (got $170 back in rebates though). Though I highly doubt I'll be able to get the high quality results like you got, I'd like to know about how much you think I should charge for them once they're done. Thanks in advance for the feedback, and great tutorial man.
@6thGearGarage 2 жыл бұрын
Hey, I'm trying to picture the wheels you have and the only 6 lug ones I can picture are the tri-claw wheels that are a split 3-spoke design. Are yours aftermarket?
@cbkenison 2 жыл бұрын
Oof, those scratches from the mounting machine must've hurt you deep down, I know I would've felt it. Gracious of you to deal with it so easily. Even with great care, mistakes like that can happen, but with such large sidewalls it is a bit unexcusable.
@6thGearGarage 2 жыл бұрын
Yeah I was bummed, but I guess it happens. I'm glad they weren't expensive aftermarket wheels.
@ryurc3033 2 жыл бұрын
It always confused me how untrained most tire changers are at some places. One that had a 1/4 inch gouge , and a rash half way around, I welded over the lip , and on one of the spokes, on a set of wheels that were excessively dinged up from untrained dipstick. It was an oddball style that was discontinued. So I couldn't find a match to it. After way to much time grinding filing sanding and polishing, they were nice enough nobody ever noticed.
@6thGearGarage 2 жыл бұрын
@@ryurc3033 You need a youtube channel - I'd love to see your repair process!
@ryurc3033 2 жыл бұрын
@@6thGearGarage as much as I would like to, it always takes so much longer to film and show what I'm building. I DO much better than I teach, if you get what I'm saying. But I'm the guy that can change out a motor faster than any book says it's possible, or fab anything under the sun. I just lack the clientele for the hot rods and cool stuff. And have to do things like swapping fuel pumps on crappy 96 dodge, or water pump on a cobalt......ugh....
@6thGearGarage 2 жыл бұрын
@@ryurc3033 I hear you... there are some things I don’t bother to film because I need to work fast and listen to the radio (can’t have copyrighted music in videos)
@randywise8817 3 ай бұрын
I like how you did your homework on testing the clearcoat that helps alot. I do appreciate how you describe what your doing for the diy at home people, very good job. The brush on black paint i though was a good touch considering im about to do that to my truck wheels. Keep up the good work and I can't wait to see your next video. Thanks Terry
@masonelliott4995 Жыл бұрын
I love the realization that you covered your floor with primer
@6thGearGarage Жыл бұрын
Yeah, it's all worn off after a year. I'm still putting paper down next time!
@braddersf1 Жыл бұрын
I was fully with you until you took them to be sandblasted. That's not an "at home" fix my dude. Get your sandpaper or a wire brush out!
@6thGearGarage Жыл бұрын
If your wheels are as bad as mine, be prepared to have them sandblasted to start with. You could spend a few days with sand paper, but it makes sense to have them sand blasted to save time and get in all the recessed areas.
@jba6677 6 ай бұрын
Might as well just get them powder coated at that point. Most powder coat places do blasting too.
@dougiemiller5030 5 ай бұрын
That was my thoughts exactly! I don't happen to have a sandblasting machine at home. Getting wheels sandblasted - £30 a wheel. Getting wheels totally refurbed - £60 a wheel.
@americanthundergod9749 5 ай бұрын
@@dougiemiller5030doing it yourself and developing a skill, priceless.
@Gumshoe88 4 ай бұрын
if this is a business of yours, you need to invest in dry ice.
@rickgrennan39 2 жыл бұрын
great video ,your a good teacher, learned a lot. thx now it is time for me to do the same
@NKPGarage Жыл бұрын
Great to see all the steps you went through. What worked. And what didn’t work. Fantastic video!
@6thGearGarage Жыл бұрын
Thanks for watching!
@unwrangler11 8 ай бұрын
Thanks for your comprehensive video. It is really helpful to see what works and what doesn’t and why. Great video!
@6thGearGarage 8 ай бұрын
Thanks for watching!
@coastalorphan 3 ай бұрын
Using the paint cap from the spray can to clean the brushes is a high IQ move. Thanks for sharing
@6thGearGarage 3 ай бұрын
You bet!
@scottmoola2311 Жыл бұрын
Damn bro. That's a helluva job you did there. 👏
@blakeREVOLUTION 2 жыл бұрын
Been waiting for this! Can’t wait to do it to my 1993 VX. Thanks for your vídeos mate!
@crazyrayuk36 Жыл бұрын
Nice job. Thanks for sharing and honesty. It helps to know the what ifs and how to fix mistakes. I was gutted when you got the wheels back with tyres and marks. I felt so bad and to be honest after all the hard work I'd wouldn't of been pleased, but you kept it cool and touched them up nicely. Look forward to more videos 👌👍
@buddhikapulasthi2998 2 жыл бұрын
Man, I freaking love your work. ❤️ Keep it up!!!
@jamesbreve8761 Ай бұрын
Yes sir you are very on point
@ricksmith3299 2 жыл бұрын
Looks great !! Therapeutic to watch too !!!
@repoxs 6 ай бұрын
Sand blasting the sure fire way to remove stubborn corrosion
@thomasdinh2753 11 ай бұрын
Landcruiser looks good
@6thGearGarage 11 ай бұрын
Thanks! I'm slowly bringing it back to nice condition.
@scientificspirituality4635 Жыл бұрын
Looking at the hard work involved..... I'd rather buy new ones...
@6thGearGarage Жыл бұрын
If I didn't already have the paint and time for a long project, I would have done the same.
@MrMattDat Жыл бұрын
The hand polished wheels are gorgeous and you should be proud of that work! Very handy video!
@6thGearGarage Жыл бұрын
Thank you!
@ephraimcamacho9600 Ай бұрын
Great job! Bravo!!!
@6thGearGarage Ай бұрын
Thanks 👍
@TR19 Ай бұрын
Best wheel prep and paint vid on the tube
@DE-ok4ld 7 ай бұрын
Very nice job! Not sure I would have that kind of patients for detailing like you do!
@6thGearGarage 7 ай бұрын
To be honest, I wouldn't do it again! Next time I'll just have them powder coated in all one color.
@MrMattDat Жыл бұрын
You did a great job on those wheels!! Very good video with so many tips!!
@CC-iz1yg 3 ай бұрын
You need to use iron remover first then acid
@dodgedurango5112 2 жыл бұрын
Awesome transformation
@samdub Жыл бұрын
These look great! Thanks for the in depth video and all tips/misshaps!
@ttinnovations3310 2 жыл бұрын
Looks Amazing, Great Job !! I did my Toyota 4runner 15" wheels
@herowillrose3198 2 жыл бұрын
Liked extra time spent to finished good.
@wirekat 2 жыл бұрын
Great video. The wheels look awesome.
@ARNOLDFALCON Жыл бұрын
Thank you I appreciate videos like this not the wasting time one learning something new comes in handy in the future
@scottloutner5253 2 жыл бұрын
Use glazing body putty to fill those deep cuts first. The sand and prime
@larserikertzgaardringen7426 Жыл бұрын
I love your use of the 1812 Overtoure!
@31acruz 15 күн бұрын
Fantastic video, very complete. Probably the best I've seen in years due to the amount of important detail you included. You have a talent for teaching and laying things out clearly. Well, done.
@6thGearGarage 15 күн бұрын
Thank you!!!
@pedrogadea4926 2 жыл бұрын
This is definitely the way to go. Forget about harsh, toxic, carcinogenic chemicals that will consume a ton of time and effort and will not even produce good results. Don't ask me how I know.... Great video edition.
@molnarrobert1893 2 жыл бұрын
I use on both the rim and tire bead silicone grease,it has multiple benefits: it stops the rim from coroding,it seals better,and the lip of the bead slips on it like on command.
@eyeofbass 10 ай бұрын
Great work. Great details. Great results. Thank you.
@peterhannam855 6 ай бұрын
An excellent tutorial . You have unbelievable patience . You did an excellent job . Well done .
@6thGearGarage 6 ай бұрын
Thank you!
@katsu3578 Ай бұрын
amazing job, but the biggest issue with spray painting (or even spraying from a gun) wheels is getting tires mounted. There's no way to avoid the chipping. The paint and clear just isnt strong enough.
@hotdogbuns255 2 жыл бұрын
Just bought some new wheels for my Subaru. I think I'll use this video to restore my old wheels.
@sethouk1453 2 жыл бұрын
Great detailed DIY video. Sharp looking LC.
@itguy7551 Жыл бұрын
He has some Bob Ross vibes. The Bob Ross of wheel restauration... Everyone can follow, and it is extremely relaxing. Also he is doing a proper job!
@6thGearGarage Жыл бұрын
The Bob Ross of wheel restoration - Thanks, I love it!
@KenanRaptor Жыл бұрын
I like it more with the brush, hand painted like rolls royce small paint details😆
@sheldonharvey8306 2 жыл бұрын
Thank you for the video. I would definitely like to see you polished aluminum wheels, like the ones shown in the video. Keep up the good work.
@rickh6963 2 жыл бұрын
Yes, Please do the polished wheel tutorial. Over on the WrenchMine KZfaq channel we have a set of 1985 Toyota Celica wheels that are going on our AE86 that are in need of restoration. We'd love to polish them on the flat surfaces. Thanks for the GREAT video!!
@chrisstuffel6819 2 жыл бұрын
To easily polish aluminum wheels, get some 0000 steel wool and Mothers aluminum polish or Diamond polish works great. Scrub the wheel with the wool using the polish as a lubricant. Wipe off once it's black. Mirror finish!
@KillSwitchNY 2 жыл бұрын
Dude they look amazing. I get it about the small imperfections and accidents but still.
@eddylorenzo5033 Жыл бұрын
I like how u showed ur imperfections and flaws great video definitely a keeper nice 👍
@gasgiant7122 2 жыл бұрын
Great tutorial video, well explained instructions & the finished product speaks for itself they look fantastic & would look great on my Hilux👍👍👍
@pigseye2 Жыл бұрын
Great video! Really appreciate the detail you provided.
@cargasegura4909 2 жыл бұрын
Excelent Job, congratulations
@peterschlater5756 2 жыл бұрын
Very well done! Hello to a fellow Ohioan.
@6thGearGarage 2 жыл бұрын
Hey neighbor!
@thomasarussellsr 2 жыл бұрын
Usually hear "Buckeye", "Ohioan" is a new one for me, Your neighbor, A Kentuckian
@evanfairbanks1020 2 жыл бұрын
I did similar to this on my land cruiser wheels. I opted to only paint the “D” shaped areas and sand and polish the aluminum on the rest of the wheel. It was well worth the work. Good video!
@6thGearGarage 2 жыл бұрын
Thanks! That's really what I wanted to do as well, but that polished aluminum wouldn't do well in winter, here in Ohio.
@LAWNPRO 2 жыл бұрын
They look great man you did a fantastic job super overkill just like I do it I figured tire machine will get some nicks they make it look fabulosa
@roxyqueen5076 Жыл бұрын
I watched your entire video. Those rooms came out really good.!!! Give me a good idea for my thank you.
@BrightEyes8513 Жыл бұрын
Yea please do a how-to video on how to do hand polished wheels! Thanks for all these amazing videos!
@SlowDelSol 2 жыл бұрын
Those polished HX wheels are nice.
@Nick-rn7uh 2 ай бұрын
The tire shop damage really really upset me after so much progress brother they all of the franchise type tire shops have caused damages like this to mine and costs me at least 80 bucks as usally had multiple sets of tires i would need swapped over , so i bought a tire machine and havent had a scratch or chip sence , thank you for all the valuable nowlege about the chemical mixes and primer setup and prep 😊
@6thGearGarage 2 ай бұрын
I definitely choose my shops more carefully now.
@marybethmaine9850 10 ай бұрын
wow the ending is great . You wont see the rougher parts when you are driving -so cool
Tips Workshop
Рет қаралды 29 МЛН
6th Gear Garage
Рет қаралды 231 М.
Autoforge
Рет қаралды 1 МЛН
Buddy's DIY
Рет қаралды 3,9 МЛН
Sushil Barfe
Рет қаралды 39 МЛН