The Drill Every Woodworker Needs

Рет қаралды 323,687

Жыл бұрын

This might be the most versatile drill for woodworking!
Watch the full review of the Milwaukee M12 4-in1 Driver • Milwaukee's BEST Drill...
Milwaukee 4-in-1 Installation Driver - shrsl.com/42wan
PLANS: www.731woodworks.com/store
Greatest Free Gift I've Ever Received: story4.us/731Woodworks
This video is not sponsored. Some product links are Amazon and other affiliate links which means if you buy something we'll receive a small commission. This helps support my channel so I can continue to make content like this.
Disclaimer: Please see the link for our disclaimer policy for all of our videos on the 731 Woodworks KZfaq channel www.731woodworks.com/youtubed...

Пікірлер: 185

@731Woodworks Жыл бұрын

Watch the full review of the Milwaukee M12 4-in1 Driver kzfaq.info/get/bejne/opeKapx_vpjJp6M.html Milwaukee 4-in-1 Installation Driver - shrsl.com/42wan Ohio Power Tool affiliate link used to help support this channel.

@FrankAaron Жыл бұрын

So it’s a Bosch Chameleon without an SDS head attachment?

@donaldhokanson3321 8 күн бұрын

I bought it intending to use it for cabinet work and i use it for everything now. It reppaces the need for bringing a drill and impact with you for around the house fixes. Love it so far.

@jonwillett7351 8 ай бұрын

I have it and use it a lot, however would have preferred a standard forward/reverse button.

@39zapatero 6 ай бұрын

Word by word what I was going to write

@ZachR-ml3op 5 ай бұрын

Makes it really awkward to have to use two hands to switch positions. Shouldve added it near the trigger like other drills are designed

@littlejackalo5326 20 күн бұрын

@ZachR-ml3op you hit it with your thumb.

@tenfriskydingos 19 күн бұрын

@@littlejackalo5326 Having used this while doing my kitchen cabinets I assume they mean when you've got the top of the drill up against the bottom of something and are already laying in an awkward position that's part of the reason you whipped this out, you have to tilt it down enough to get your thumb up that if you do it with one hand it's easy to drop your screw without a second hand to keep things steady. At least after hours working in the twist yourself into knots cabinet mode ya know

@Boostiverse 15 күн бұрын

If you’re building something and putting screws somewhere that are hard to reach, you need to design it differently

@nonolabs Жыл бұрын

Very efficient and speeds up productivity. I went with the Bosch version as it was a pound lighter and an inch smaller and fits in the hammer loop.

@johanpotgieter4318 4 ай бұрын

My Festool is still going strong after 20 years This kind of tool is a must-have.

@thefrankperspective4247 Жыл бұрын

Time to call Ryobi and let them know TTI forgot to make a baby brother.

@3L5Ancho 7 ай бұрын

Ryobi big 🗑

@ZachStein 6 ай бұрын

Or Ridgid

@antonioreyes421 5 ай бұрын

I don’t think it’ll be possible with the size of Ryobi’s battery packs. Unless they make it out of the USB Lithium line but 4v is pretty weak.

@thefrankperspective4247 5 ай бұрын

@@antonioreyes421 touché

@antonioreyes421 4 ай бұрын

@@thefrankperspective4247 Guess what!? They actually made this tool in the USB Lithium line! Look at Ryobi Tools sight, Product>USB Lithium> … and you’ll find the drill!

@mechsupernova Жыл бұрын

I'm an electrician and I got one of these along with the big packout bit set, I haven't picked up a screwdriver since. This drill gets used a lot more than any other Milwaukee drill or impact I have. I like how in high speed it doesn't have the torque to strip out screws, it makes them as tight as I can with a regular screwdriver.

@stevecarter8810 7 ай бұрын

Good to hear. I thought my Milwaukee drill and driver set would end all my diy home driver needs, but they are both too excitable to casually drive screws into weaker material.

@scottbionicnerf8727 Жыл бұрын

I love that little bad boy. A buddy of mine has one. He says it's favorite tool. He uses all the time at the apartment complex he works at. He let me use it at his house helping him with a project. I immediately felt the serious need for that tool.

@nicholassoviak2386 Жыл бұрын

I am a flat rate RV repair technician absolutely love and use this daily best Milwaukee tool hands down

@davids8493 Жыл бұрын

You failed to mention that you can connect the different heads in multiple combinations if needed. It is labeled as a installers drill/ driver. It is specifically intended for people who do installations who encounter multiple scenarios. I install many different configurations for a living and could not be without one. I have 2 sets for different locations and I couldn't be happier. Worth the investment.

@brianhall9019 5 ай бұрын

People normally knock the top mounted reverse switch. I have found that after using it for a while it actually makes a lot of sense for the way you hold this tool. It’s to be held like a drywall gun, thus using your thumb makes more sense when you are in strange positions using this. I am a Milwaukee fanboy all day long. I own more Milwaukee than my wife knows about…but this is in my top 3 tools. I actually have two of these.

@diverbob8 7 ай бұрын

I've had this set for nearly a year and for a M12 tool, this thing is surprisingly powerful. I'm not giving up my other Milwaukee drills and Impactors, of which there is a pile, but I pick up this one first most of the time. 10 out of 10....ALL DAY!

@YoungHeartedSoul 8 ай бұрын

Bought this last year and i dont have to use my regular drill again. This is light,compact, good power and speed. The battery, regular 12v has a good life. Excellent tool that can replace screwdrivers and heavier drills. The storage case is very nice as well. Has a magnetic strip in the front to hold different driver bits or drill bits.

@christopherjacklin7589 8 ай бұрын

I've been using the Bosch Flexi-Click for a while, which is much the same thing. Great bit of kit - especially if you're doing a lot of cabinetry. Even if I don’t need the fancy attachments, I often find myself reaching for it over my 18v dewalts as it's so light. Both are excellent tools, so consider if there's anything else in the 12v range you might want. I already owned the Bosch GFk trim router so I've stayed with that system.

@user-ox9ks8de7t 6 ай бұрын

A lot don’t know that the 90° attachment will also take the other 3 attachments. You can really customize the drill to how you need it

@millenialmemoirs 8 ай бұрын

HVAC guy here. Almost all of us carry a cordless impact as a/the primary tool we use. Milwaukee m12 fuel surge works for me and fits inside of my small veto tech pack.

@allenmcnamara9213 Жыл бұрын

About mine over a year ago it's an amazingly good tool comes with a cool case. Small compact powerful

@sheslikeheroin1661 8 ай бұрын

I use mine more than any other drill / driver that i have!

@robertdaley8641 5 ай бұрын

I've had this for a few years and absolutely love it!

@feral429 5 ай бұрын

I use it at work everyday I love that little drill.

@tomdolton2960 4 ай бұрын

I've had one now for 2years and I just can't get enough of it I wish Milwaukee had a M18 version I would but it in no time

@RobertHenris-rr5vd 6 күн бұрын

I think bosch makes an 18v version of their flexiclick multi head driver

@JimsContent 6 ай бұрын

Currently an apprentice cabinet maker so I’ll look into it

@antonioreyes421 5 ай бұрын

I recommend it! Will save you time.

@JimsContent 5 ай бұрын

@@antonioreyes421will do then

@Paul-044 5 ай бұрын

I need this. I already own the M12 Milwaukee sander.

@barrytipton1249 5 ай бұрын

I have one and I love it. Plenty of power, plenty of battery life, and very comfortable to use. The attachments have come invery handy. Thanks for the review!

@johnsanford3596 Жыл бұрын

Bosch did it years ago, and better. The ONLY possible improvement on the Milwaukee is the guard against bashing your knuckles. Of course, that same guard can potentially prevent you from getting into a tight place.

@brianhawes3115 6 ай бұрын

I got a festool 20 years ago that does all that😂

@NickWeissMusic 4 ай бұрын

I have 18v makita already, went Milwaukee for 12 volt recently since this pack was available with batteries and love this thing and the ratchet. Both brands seem to make fine tools. I’m poly now, it’s 2024, it’s all good.

@mzgarage 5 ай бұрын

Right before you said it, I thought this would be perfect for pocket holes!

@juhs 2 күн бұрын

This is my favorite drill/driver and I have all of them

@dashmay1713 Жыл бұрын

Forward reverse buttons are not mentioned in this video. On top of the tool, hard to reach with thumb, membrane switches not mechanical. Prefer standard type of fwd reverse switch.

@joekent6576 8 ай бұрын

Oh you mean the Bosch Flexi-Click.

@Mike-dn4ju 6 ай бұрын

You mean the Festool CXS? The patents expired, hence all these popped up in the last few years.

@stevebengel1346 23 сағат бұрын

Exactly, my first thought @@Mike-dn4ju

@wayneprice6918 5 күн бұрын

Bosch makes a great one in 12v. Buy the one with the belt clip, more torque. The offset head is the most useful. Look for clearance prices. Comes with multiple heads . Offset, right angle, short head, and 3/8 inch chuck. Love my Milwaukee 12v hammer drill but also love my Bosch 2 inch 12v power planer. The small 12v Bosch carries well in a tool bag. Smaller than the Milwaukee.

@peterkn2 18 күн бұрын

Bosch has a similar drill/driver with swappable heads and I hated it. I now have this Milwaukee and I think it's a big step up. I also have 18-20v drill/drivers and the 12v is my go-to for day to day stuff.

@noelv1976 Жыл бұрын

This will be my replacement if I ever lose my M12 Fuel Surge Driver

@thomasazzopardi4760 Жыл бұрын

I have this driver and I love it. It does as advertised

@Dungeonofman Жыл бұрын

Looks like the festool copies are incoming

@melvinorozco8584 4 күн бұрын

I love my 4 in 1 installatiin driver. I rarely use my impact and drill anymore...

@kingkoala2563 3 күн бұрын

I use that thing all the time.

@render8 Сағат бұрын

They need to fix the Fwd/Rev switch (put it back over the trigger) Add a locking collar to the offset drill attachment And knock back the metal chuck to plastic to lighten it up

@agrennan5411 20 күн бұрын

Got the 3 in one version good for installing kitchens

@cyshtoph 8 ай бұрын

The concept is great. I have one exactly like this one from Metabo and it's a beast. I've used it daily for many years as my main drill and the best thing is coste me 1/3 of the cost of this drill😊

@BobEllis79 9 ай бұрын

I tried buying this tool twice. Both arrived with wobbly armatures. Shame Milwaukee can't put them together correctly because the concept is solid.

@richardmahoney4531 15 күн бұрын

Still innovating mileaukee !!!🎉❤

@thewoodshopdust4141 5 ай бұрын

I have one. Love it!!!

@alexanderduffey9758 5 ай бұрын

We use these in our Hinging department at the cabinet shop I work at, they’re pretty great, only complaint would be that the grip is a little weird shaped lol

@harrisonhowell6778 Күн бұрын

I think it would be great foe electricians as well.

@smaeg0l 5 ай бұрын

Now do one on the Milwaukee M12 jigsaw

@dcmirk 7 ай бұрын

I got goosebumps. Is this what love feels like??

@michaelhamerin3814 15 күн бұрын

Bosch put out this several years ago, called the Chameleon

@nicebubbles 5 сағат бұрын

I had no idea that thingy on the front was a magnetic bit holder, just wish they made it extended battery friendly, thing flops without a 3d printed stand.

@jknocal 9 минут бұрын

Looks sweet

@seandigger6678 13 сағат бұрын

I love mine

@ciscoelnino 4 ай бұрын

I have it, n same complaints as others. The location of forward n reverse, but just something I have to get used to, just like reminding myself that the front is magnetic, and to use it

@WEALRO 18 сағат бұрын

Love mine

@John-gw3kd 6 ай бұрын

I love this thing, but two complaints. The minor one is the magnet could be stronger. I added a flat neodymium on top of it. The big complaint is the electronic direction button. You have to look at the top to tell what direction you left it in. You can't just feel the position of a mechanical toggle like almost all of their other drills have. And it's intended to be held so thumb changes direction, and middle finger engages the trigger. I've had it for a year and still haven't gotten in the habit of holding it right.

@ernie8401 6 күн бұрын

I’ll only get it once it goes on sale.

@Quantalume Жыл бұрын

Have it and love it.

@allan5721 Жыл бұрын

I’m not one to usually complain about price, but this one is up there. Maybe if the driver and 2 drills I have all due at the same time, then I could consider it. 😂

@stacysu9131 Жыл бұрын

Lifetime Warranty makes it worth it. Milwaukee actually guarantees their products. My cousin contacted the company about his 5 year old drill that just quit working. He sent it into Milwaukee and they replaced it. So the higher price is worth it.

@TheDirtyLuigis Жыл бұрын

@@stacysu9131 for some things for sure. Milwaukee makes some great stuff, but rigid better imo. Cheaper, lifetime warranty as well, and that’s what I see on some of the most rugged job sites

@FrankAaron Жыл бұрын

@@TheDirtyLuigisrigid does not have a lifetime warranty. 🤦🏼‍♂️ They have a lifetime service agreement which provides them a bunch of arbitrary outs to not honor a commitment to fix or replace your tool which they use quite often

@llewellinfelon 8 ай бұрын

@@FrankAaronAgree - I had a Rigid drill with a short in the trigger and an impact that quit on me after 3 and 4 years, respectively. I wished I’d used an attorney by the time I’d gotten them to honor their LSA, but they replaced one and refused the other. No more Rigid for me.

@j.vonhogen9650 5 ай бұрын

So, what is the price of this tool? Is it really expensive?

@paulellis84 Жыл бұрын

I do like how you can move this thing into basically any angle that you would need. They did a fantastic job on this tool, and I understand the price point. Don't like but understand it. That's for this quick video on these tools, Mr. Outlaw!

@DarkTubeToo Жыл бұрын

Phenomenal driver. Be on the lookout though. Home Depot from time to time will offer this driver at a substantial discount. The benefit of this driver is you can’t over torc a screw. Therefore, installing cabinet, screws, computer work, detailed installs that require finesse can be done with ease and worry free. Totally recommend it.

@indigo_wolf3574 8 ай бұрын

Patience can definitely snag you a deal. I think I bought in on a holiday Fall Deal for $228 with: 2 x 2.0 Ah batteries 1 x 6.0 Ah battery.

@joelsmith6919 4 күн бұрын

I need this

@markchidester6239 7 ай бұрын

My next m12 tool

@gx.santiago9604 6 ай бұрын

i forgot i had this little tool in my shed and was about to buy the fuel screwdrivers , save myself from spending a couple dollars

@averageconsumer8222 19 күн бұрын

Just patiently waiting for the Dewalt version 😢

@jacobkoz1835 17 күн бұрын

They look all right, but I definitely would never get one because Dewalt already made a 90 bit. That’s all I need and some extensions. If you can’t do it with that that I don’t think you should own a drill.😂

@bkjets2023 Жыл бұрын

I've had a very similar Bosch Flexiclick for years. Never use it until you need it...

@adamvelazquez1877 8 күн бұрын

About time, DeWalt had it for years and it's a 12v lol

@DNS_rabbit 6 ай бұрын

Looks very similar to Festtool 😮

@RUM123 5 ай бұрын

Eh, it's OK. I've got one and will probably keep it for some uses, but I'll be ordering the new Festool CXS12. Too much wobble in the bit when driving. I think this is more due to the 1/4" hex system than anything else. The Centrotec system seems more stable.

@odanethomas1073 9 күн бұрын

They need to make a drywall head

@braedenduffner801 14 күн бұрын

Black amd decker did this a long time ago

@KLartrandM 5 ай бұрын

Ok harbor freight, pay attention. I see a bauer version in our future 👀

@loganpreskar9209 6 ай бұрын

I hope dewalt make something similar soon

@benclarkson4205 4 ай бұрын

Having bought the Festool version… I’m now envious of the offset attachment… 😔

@joewoodchuck3824 5 ай бұрын

Not convinced this will be a big seller especially in Milwaukee's price range.

@fisheye42 4 күн бұрын

Why does it have the front “finger guard?” Doesn’t that get into the way of inserting into recessed spaces?

@SlapBack01 8 ай бұрын

The direction switch is very unhandy, but other than that, very handy

@MakeWithMike 17 күн бұрын

But the front arch handle gets in the way 😢

@exigauner Жыл бұрын

Festool invented this type of drill with c handel an detacheble chuck

@mrniusi11 Жыл бұрын

Festool is gay

@seanbrotherton542 Жыл бұрын

The Milwaukee is much stronger than the Festool.

@exigauner Жыл бұрын

But not as good for Installation, and quality is not as good as festool. PS: in September comes the new csx 12 with 50nm i dont know how much this is in inch pounds.

@seanbrotherton542 Жыл бұрын

@exigauner there are side by side comparisons on the Milwaukee and the festool. Its not even close. I like festool also but in this case they are beaten

@exigauner Жыл бұрын

@@seanbrotherton542 shur but there is a new 12v festool one that comes in 3 months. And they say that will be the strongest 12v drill on Market. This one is near 15 years old and brushed. The new 12v cxs has a Third gen brushless Motor and 21700 cells.

@MadLadsAnonymous 5 ай бұрын

This needs an UPDATE!

@Postghost 8 ай бұрын

People always go straight to complaining about the buttons being on the top, but after 18 months of using one of these, I've learned it's the best place for them. Because of the way I hold this drill, my forefinger and thumb are practically always able to easily slide over and hit the buttons without changing hand position at all.

@Mr.Neko013 Жыл бұрын

My buddy has one and when it comes to driving screws into wood it kinda lacks enough power to do it without fighting it

@stacysu9131 Жыл бұрын

Cool

@bradpowell5581 5 ай бұрын

Where is the forward/reverse button???

@jeffdillon1972 26 күн бұрын

What’s the point of the hand guard?

@justinkase1360 2 күн бұрын

"it's pretty powerful for what you're getting" What this mean?

@RafaelCruz-qs9ug 4 ай бұрын

Price please

@divokyvolny1769 5 ай бұрын

Do you know Festool have it like a 20 year sooner..? 😂

@johanpotgieter4318 4 ай бұрын

Mine is still going strong 20 years old

@tobiramasenju4316 7 күн бұрын

How much tho

@bazyliaczosnek 3 күн бұрын

Graphite have thesame functions from mamy years

@user-bt5un5od6z 5 ай бұрын

هذه الماركة ليست لدينا بالخليج العربي ؟؟؟؟ماهو السبب

@knpo5260 8 күн бұрын

I’ll strip the holes Alright

@hernandovillamarinbuenaven7476 5 ай бұрын

~ $150= bucks from Amazon. Not bad.. 🤔

@joaquinchan9936 16 күн бұрын

I was somewhat fighting this tool from time to time. Ended getting the Bosch. Also, worst trigger ever.

@Erikpdx 5 ай бұрын

I found it on Amazon for $127

@ErikNemo 5 ай бұрын

Lost a purchase from me by not having a standard forward/reverse button.

@donotrobme9295 Жыл бұрын

My go to for cabinets

@YOUR_NARRATOR975 8 ай бұрын

Same price as a DeWalt. I'm getting this instead

@larrygonzales7410 4 ай бұрын

Bauer has the same thing and you don't have to be a trend follower just because it says "Milwaukee" on it

@thechamp2585 Жыл бұрын

I almost bought it, but i feel like it's a gimmick tool.

@seanbrotherton542 Жыл бұрын

I bought one thinking the same thing. Now I use it all the time. It's a great tool

@thechamp2585 Жыл бұрын

@@seanbrotherton542 I broke down and bought it this week.

@nicholassoviak2386 Жыл бұрын

I'm a flat rate RV repair technician this tool is what I use it's absolutely the most important tool in my box

@mikejungferman4744 11 сағат бұрын

Strictly for the homeowners, definitely NOT Professional, especially being M12 Fuel , I've gone through so many Milwaukee tools I'm trying Dewalt, unless you pay 100s of dollars and get heavy tools you'll keep buying tools, back in my day we used electric tools and they lasted 15 years no Sh/t