How to Make a DIY Storage Chest

How to Make a DIY Storage Chest | FREE Build Plans

Рет қаралды 172,995

Күн бұрын

I built this easy DIY storage chest using pocket hole joinery. This is a great beginner woodworking project because it uses simple joinery. We are using this as an outdoor storage box, however this would also make a great indoor storage box for blankets and quilts. You could also use this as a DIY toy box or a storage bench. This is an easy woodworking project that can be made with minimal tools. I used my Massca M2 pocket hole jig (linked below) to build this project. Building with pocket holes makes woodworking projects that are strong and very approachable for beginner woodworkers and only requires basic tools. Amazon and other affiliate links used in this description to help us make more videos. Please consider supporting us by using the links below to buy your tools and supplies.
Videos To Watch Next
Outdoor Sofa Sectional: • DIY Modern Outdoor Sec...
Free PLANS: www.731woodworks.com/store/st...
Tools and Supplies Used
Massca M2 Pocket Hole Jig: masscaproducts.com/products/m...
Massca Face Clamp: masscaproducts.com/collection...
Screws Needed for this project: masscaproducts.com/collection...
Air Compressor with Pin Nailer: amzn.to/3wHSKML
Titebond Wood Glue: amzn.to/3kj0nXb
GluBot: amzn.to/3kk5Eha
Hinges: amzn.to/3ifcJNx
Paint Sprayer Used: amzn.to/3B9rr15
Other Products I Use and Recommend
MicroJig Push Block: lddy.no/z1t8 Use Code 731MICROJIG10
Table Saw Blade I Use: lddy.no/z1te
My Other Table Saw Blade: lddy.no/z1tc
Miter Saw Blade I Use: lddy.no/z1ts
Katz-Moses Stop Block: lddy.no/z1th
Katz-Moses Apron: lddy.no/z1tp
You can support our channel by shopping our affiliate partners for your tools and supplies:
Taylor Tools: lddy.no/yoeb
Massca Products: masscaproducts.com?aff=3
Katz Moses Woodworking: lddy.no/yr2f
Bits & Bits: bitsbits.com/ref/6215/
Amazon: amzn.to/3cCWbgl
Join this channels membership to get access to exclusive member only livestreams, discounts, and other perks:
/ @731woodworks
You can support us on Patreon as well / 731woodworks
Camera Equipment I Use for My Videos
Canon M50 amzn.to/3en9EaQ
Canon M6 Mark II: amzn.to/35dRGF2
Sigma 16mm: amzn.to/35aoKOb
Canon 22mm Lens: amzn.to/32fp79w
GoPro Hero 8: amzn.to/2JY48l2
Microphone I Use: amzn.to/3crbxTX
Chapters:
0:00 Intro
0:35 Cutting the Side Panels
1:03 Drilling Pocket Holes
1:32 Assembling Storage Chest
1:59 Making Legs for Storage Chest
4:51 Making Bottom for Storage Chest
5:13 Installing Trim on Storage Chest
5:52 Making a Top for Storage Chest
8:39 Routing Edges of Storage Box
9:36 Outdoor Finish for Storage Bench

Пікірлер: 277

@731Woodworks 3 жыл бұрын

Check out my Outdoor Sofa Video: kzfaq.info/get/bejne/a6yRmNVivayqqYU.html

@TomTom-nw4qh 3 жыл бұрын

What brand pocket hole screws do you use?

@731Woodworks 3 жыл бұрын

Massca screws. They are linked in the description

@manyfeather2knives423 4 ай бұрын

I love hiow you professional woodworkers tell us weekend warriors it’s a simple build.

@phillipmorgan6908 4 күн бұрын

I watch all your videos 😅 keeping coming

@charlesgerlach7059 3 жыл бұрын

I have been looking for a project like this to bring my skills to the next step. thanks Matt for all you do, you are an inspiration to all that have fun making sawdust.

@joeyleerobbins 3 жыл бұрын

Sitting in my garage doing my initial burn in on my new RecTeq 700 and watching this video! God bless you brother and thanks for this vid! Enjoying a beautiful TN summer night!

@731Woodworks 3 жыл бұрын

Great! Enjoy that grill. It is awesome!

@paulmannix1760 3 жыл бұрын

Just downloaded the free plans, thanks. They came out of the printer in landscape format with large print which is great so I don’t need my glasses to read them. I live in New South Wales Australia & where we are we’re in COVID lockdown for a couple of weeks so I’m not really allowed to go to the hardware store for wood at the moment, so my build will have to wait a bit. Again thanks for the plans, really like your channel, Regards Paul

@jonprater2361 3 жыл бұрын

Keep it up, Matt!! I love the enthusiasm you display in your videos. I've been a follower for a long time and am proud to see how far you've come.

@FixItFrench 3 жыл бұрын

My wife has been asking for something similar to this for the end of our bed. This is giving me some good ideas. It looks beautiful 👍🏼👍🏼

@731Woodworks 3 жыл бұрын

👊🏻

@Kat-mb3ty 8 ай бұрын

Thank you for sharing this! I just finished making it and it’s perfect for what I needed.

@DudeSawdust 3 жыл бұрын

Simple projects are often the most fun. Nice job!👍

@zachroller3448 2 жыл бұрын

Awesome build! Thanks for the plans!

@katzmosestools 3 жыл бұрын

I've been meaning to build something like this for my house. great build! Love the thumbnail 😜

@731Woodworks 3 жыл бұрын

Thanks! I thought you might lol

@tomstone2322 3 жыл бұрын

My wife will love this!

@donaldjones4693 3 жыл бұрын

It was great to see you get back to your roots and build something for us beginners I know you’re trying to really reach out there and grow a lot but work but I love what you’ve done looking forward to the next one

@731Woodworks 3 жыл бұрын

I've said before that I'll continue to make beginner projects as well as more advanced. I enjoy all aspects of building.

@Jimc4007 3 жыл бұрын

I'm always amazed when I see your daughter, no way Amy can deny she's her daughter, they could be twins! Nice storage chest too by the way!

@731Woodworks 3 жыл бұрын

lol thank you

@donbrowning689 3 жыл бұрын

Fantastic video, love boxes and chests

@nicokwapper 3 жыл бұрын

Nice! Good idea. Thanks. You inspire me, I just started out with woodworking (hobby).

@PeterFloyd678 2 жыл бұрын

Great looking simple chest. I think I found my next small project to build. I know that my Mrs will definitely appreciate the extra storage space. Keep up the great builds!

@greatgrandpaswoodworking 3 жыл бұрын

Great video, perfect timing. I just bought the lumber for your Modern Outdoor Sectional then will do this next. Clear instructions.

@731Woodworks 3 жыл бұрын

thank you!

@sixpackbinky 11 ай бұрын

Pretty!

@markhilderbrand8204 3 жыл бұрын

Awesome, think I may use this idea for a toy box for my son.

@vandamattvandamatt2785 3 жыл бұрын

I love this video! Just like the old times 🤙🏼

@rkerby6375 Жыл бұрын

An excellent design and build project! Well done!

@lesliecarter2460 2 жыл бұрын

I love your vids Matt I’m trying to make most of the projects you show

@thefrankperspective4247 3 жыл бұрын

Adding this to my to do list.

@bluegrasstravelers8195 2 жыл бұрын

Thank you looks great

@tomj528 2 жыл бұрын

I just binged watched the entire outdoor furniture series, great projects and fun videos to watch!

@beedee3217 3 жыл бұрын

Nice build there Matt, Glad to see your channel taking off like it is. Keep the good videos coming.

@jwhiddon69 3 жыл бұрын

I just got the plans, thank you so much. I love all of your videos, especially the pocket hole tutorial, I learned a ton!

@731Woodworks 3 жыл бұрын

Thank you

@josephcampbell007 3 жыл бұрын

Liking the new build, and how you used the onebasix to the fullest. lumber prices have me holding off on my projects for now. keep the awesome videos coming. 👊

@glory3670 Жыл бұрын

I love the build. I think I'll do this one out of cedar fence pickets. That way I can use it for package delivery.

@astuntz 3 жыл бұрын

Darn you Matt! Now every time I go to my wood shop my inner voice has an Arkansas accent!

@731Woodworks 3 жыл бұрын

lol

@guyincognito. 3 жыл бұрын

Glad I'm not the only one!

@woodworkingandepoxy643 Жыл бұрын

@@731Woodworks I'm not even kidding when I tell you this. It blew my mind. Couple weeks ago I'm in Lowes and can't find the 2x4s. They wasn't where they usually are. So I find an employee and said tubafour and he looks at me for a few seconds longer than he should have and says "oh! Matt's his name! Matts way to say 2x4 is just addicting!" And took me even longer to realize he was talking about you lol

@Goose8219 3 жыл бұрын

Poor Matt poor poor Matt so much effort in the kick and he was proud of that kick. I salute you brother you got more air than me

@731Woodworks 3 жыл бұрын

lol, those are grade A ninja skills my friend!

@jameslogan1153 2 жыл бұрын

That was short, but sweet. My daughter and I will make one for my wife this week. Will let you know how it goes

@jonreeves3993 2 жыл бұрын

i like this, my wife has been asking for a cedar chest. i'll use your design. thanks!

@diy-doityourselfconcacique4353 2 жыл бұрын

VERY COOL AND EASY TO DO - NEXT PROJECT KEEP DOING SUCH A GREAT WORK - BLESS

@playsball Жыл бұрын

oohhhhh I can't wait to make my first chest! Thank you thank you!

@markfishburn8284 3 жыл бұрын

Very nice thank you for sharing your video.

@4321Woodworking 3 жыл бұрын

Awesome looking build!! My brain wouldn't have let me do 4 boards and 1 thinner on the top I either would have had to put the thinner one in the middle or rip all 5 down to teh same width then built it, probably the former. Only change I would have had to make but again that's my own OCD.

@larrystone5749 2 жыл бұрын

Good job enjoyed it thx for sharing

@pritchettsprojects9788 3 жыл бұрын

Love it! Nice simple and practical build!

@731Woodworks 3 жыл бұрын

Thank you!

@paulmood308 3 жыл бұрын

Good looking, practical, and multi-use. Everything I love in a build. Good video Matt!!!!

@paulmood308 3 жыл бұрын

PS, love the ninja skills display 😆

@731Woodworks 3 жыл бұрын

Thanks! 🥷

@daviddura1172 3 жыл бұрын

Love the simplicity of design When I make this for my patio I may beef up the top for extra seating and move the handle from top to front Great video

@happytrails5400 3 жыл бұрын

Hey Matt, As always, you are at the top of my list of favorite KZfaqrs. My daughter is a doctor and she did change her last name when she go married. She is now Dr. Outlaw, yes, Dr. Outlaw.

@731Woodworks 3 жыл бұрын

Thank you. That’s great

@craigcolbourn8351 3 жыл бұрын

Great vid! This design can be used to create so many other pieces. Thanks for sharing my friend!

@731Woodworks 3 жыл бұрын

Thanks for watching!

@lesusan3338 2 жыл бұрын

Very nice! I would suggest a screen under the bottom boards. The dirt dabbers would make a nest inside where I live.

@richenck9192 3 жыл бұрын

Such an easy great looking project! Looks like that AC will come in handy.

@731Woodworks 3 жыл бұрын

lol for sure! Still waiting on it ha

@johnwhitley2898 3 жыл бұрын

Very cool 😎!

@elitelawn9547 3 жыл бұрын

Pocket hole King. Really cool and easy to do project. Great job! 👊🏻

@731Woodworks 3 жыл бұрын

👊

@nobuckle40 3 жыл бұрын

Great build Matt! Also, thanks for the plans. :-)

@SXSVideos 3 жыл бұрын

This is awesome. Thanks for another awesome video sir 👊👊.

@bigt33 3 жыл бұрын

Great job Matt ! I along with a lot of others appreciate your hard work ! Great to see you back using pocka Holes for this project!! The Community is unbelievable!!! Still lovin the content! Continue when you can to help the Beginners !

@731Woodworks 3 жыл бұрын

Thank you 👊🏻

@reyrodriguez9237 3 жыл бұрын

Another great video... 👍

@imsowright90 7 ай бұрын

Nice build.

@GyWO10 3 жыл бұрын

Once again, an awesome build brother!!! 👊🏽

@731Woodworks 3 жыл бұрын

Thank you 👊🏻

@paulabhatt1769 3 жыл бұрын

I want one of these 🤩🤩🤩

@krickette5569 3 жыл бұрын

Where I live here in Arkansas I'd have some Nasty spiders moving in through the cracks in the bottom. Maybe covering the bottom with some screen would keep the spiders out. ?

@celholland 2 жыл бұрын

This would make a good Equine tack box, with the addition of a tray.

@charleshunt9217 2 жыл бұрын

i like your video thats vary insteresting thanks stay safe

@reinhardburkholder590 3 жыл бұрын

We’ll done!

@lindasavary4407 Жыл бұрын

Love the build...and the clean face!

@paulabhatt1769 3 жыл бұрын

Wow love this chest 🥰🥰🥰

@scottkopecky429 Жыл бұрын

A Moving Experience!!

@valkyriis8927 3 жыл бұрын

This reminds me of the chest I made in my high schools woodworking class. Can't wait to start woodworking again, starting with this project.

@coreygunter4787 3 жыл бұрын

Looks amazing. Gonna build a couple. See if i can sell em..

@mishellekochel4510 2 жыл бұрын

Making two of these a little smaller. We are placing items in them that we wish to leave to our girls. AND they'll get a keepsake storage chest to boot. ;)

@dawabbitt3079 3 жыл бұрын

Thank you, for yet another inspiring video! ... As a suggestion - you should add an 'Applaud' button to your videos. Again, thanks for a very cool idea - I'm thinking to build this to replace our current blanket chest I made out of plywood.

@731Woodworks 3 жыл бұрын

Thank you. Unfortunately the applaud button isn't available to me. They only give certain channels access to it.

@FowlersFarmhouseMore 3 жыл бұрын

Very nice build, this looks far superior to the one I threw together with plywood 🤣🤣

@rodcormier7428 3 жыл бұрын

Great video ... simple and easy to do for the beginner... looks good:)

@731Woodworks 3 жыл бұрын

Glad you liked it!

@jasongibson4730 3 жыл бұрын

Your an awesome inspiration brother, the honey do list is half done since watching you videos. May you and the family be blessed for all the information you give back to us all!!!!!!

@731Woodworks 3 жыл бұрын

Thank you

@nateswoodcraft6715 3 жыл бұрын

Nice job sir 👊

@731Woodworks 3 жыл бұрын

Thanks 👍

@rerod 3 жыл бұрын

Greetings from Fort Smith. Love your videos brother!

@731Woodworks 3 жыл бұрын

Hello neighbor! Thanks!

@alexreid4131 3 жыл бұрын

Awesome project Matt. Thanks for sharing 👍

@michaelkraft6018 9 ай бұрын

Matt- Great project and video. I am nearly done building this, although with some modification. I made it larger to accommodate my patio seat cushions, and taller (table height) so we can use it as a place to put food and stage for the grill and smoker. So it's approximately 44x20x30 high. I am also putting it on casters and I added hardware cloth on the bottom to keep critters from getting in between the slats. My experience with a router is limited. I did use a chamfer bit on all the edges, but obviously there is the round inside corner that it leaves behind. I realize it's only outdoor furniture, but curious if you used a chisel or some other method to make better corners after you used the router. For a finish, I was going to use stain, but after consulting with the folks at the red store paint counter, they persuaded me that stain and paint are both going to peel eventually in an outdoor environment and the paint was much less money. I'm using a Zinser primer, followed by two coats of exterior paint. Thoughts on the finish? I had contacted Cabot directly about the Australian oil that you used and they recommended against that for being out in the elements, which yours, it appears, is not. Keep up the good work. Love watching all your material.

@aarondominguez6165 Жыл бұрын

Would be nice to see the same walkthrough as a bit more of a budget using just a circular saw when you don’t have a mitre or table saw.

@DanielPlunges 3 ай бұрын

I second this.

@neilhorsley343 3 жыл бұрын

Hey 731, just making a small kids size picnic bench table but things have to go wrong. Yes I was pulling me hair out as you would but getting things sorted

@upperhandcustoms11 3 жыл бұрын

I would have installed the hinges on the inside. That way it would be cleaner looking and not be hitting the back of your legs when using as a footrest.

@GavinStoneDIY 3 жыл бұрын

Really really liked this build. Thanks for the detail.

@shaesmith8962 3 жыл бұрын

Matt, do yourself a video and make a fence with a stop block for your miter saw. You won’t regret it. Keep up the good work. Love the videos and the positivity

@731Woodworks 3 жыл бұрын

It’s on the list of to-do projects this year

@Damon_Barber 3 жыл бұрын

Great build! 48 hrs with no rain for the stain to dry? Well, guess I won’t be doing that until August or September! It’s been raining every afternoon here for forever it feels like.

@731Woodworks 3 жыл бұрын

lol

@jeffreywalden868 3 жыл бұрын

Great ideas as always. Thank you for all you do!

@731Woodworks 3 жыл бұрын

Thank you

@donnamartin2568 3 жыл бұрын

Lol well now I have got a new project to make for my son and daughter. Might as well start it today before one of them see this....off to Lowes lol

@celholland 2 жыл бұрын

That would make a good Horse Tack box. Add a trey.

@lindsaydickson47 3 жыл бұрын

Perfect for my recycling

@pteddie6965 3 жыл бұрын

Great looking storage cabinet, Matt. I bet that a bunch of us 'weekend wood warriors' build this one.

@731Woodworks 3 жыл бұрын

Hope so!

@sandsquid 3 жыл бұрын

Nice shirt, Great vid!

@731Woodworks 2 жыл бұрын

Thanks!

@jimmeeks2632 3 жыл бұрын

My daughter has been wanting me to make something like this for her room, blankets and such. I'm on it now!! Thanks

@731Woodworks 3 жыл бұрын

Awesome

@chairfitcamp 2 жыл бұрын

Are you I Covington GA. I feel like I met you at Alcovy fitness

@731Woodworks 2 жыл бұрын

I'm in Arkansas

@diplayball 3 жыл бұрын

Great video. I love how this came out.

@731Woodworks 3 жыл бұрын

Thank you

@patrickrider2039 3 жыл бұрын

Having some family fun in the work videos makes for good TV.

@731Woodworks 3 жыл бұрын

👊🏻

@jnevison4876 3 жыл бұрын

Thanks for the content

@kashel83 3 жыл бұрын

Those sweet moments in life when one of your favorite channels uploads EXACTLY what you needed. Thanks!

@731Woodworks 3 жыл бұрын

Awesome 👊🏻

@ssgtsyoung82 3 жыл бұрын

Very nice job!! So I built something similar a couple years back for my son. It ended up getting some horrible splits. I used same method of pocket holes. How would you suggest to prevent in future?

@wayneblondiaujr5452 Жыл бұрын

Hello Matt, really love your videos. You are a joy to watch and listen to. I am older and thinking of doing woodworking as a hobby possible side line. I did not see free plans for this chest. Am I missing something. Can you send to me or tell me what I am doing wrong to not be able to see plans. Thanks Bob Blondiau. From Oklahoma.