75 kg Thrust Rating - How to Build and Use the Series 1780 Drone Test Stand

Рет қаралды 100,221

Күн бұрын

In this video we show you how to build the Series 1780 test stand, how to install your motor and propeller, and how to perform manual and automated propulsion tests.
The Series 1780 can measure up to 75 kgf of thrust and 40 Nm of torque, and comes in single motor or coaxial configuration.
For more information or to order the Series 1780, visit our website: www.tytorobotics.com/pages/se...
00:00 - Introduction
00:31 - Building the stand frame
3:31 - Attaching the Load Measurement Unit
4:40 - Installing the Motor and Propeller
5:58 - Attaching the Power & Control Console + ESC
6:40 - Hooking up the Main Board
7:04 - Installing the Optical RPM Probe
7:30 - Software
8:41 - Manual Propulsion Test
9:53 - Automated Propulsion Test
11:29 - View + Analyze Data

Пікірлер: 69

@rashmiranjannayak3251 29 күн бұрын

Beautiful experiment to test thrust.

@tytorobotics 29 күн бұрын

thank you!

@jf5336 2 жыл бұрын

Lauren, thanks to you and the guys for the set-up demo and tests.

@Suavache 8 ай бұрын

Thử nghiệm động cơ mạnh mẽ rất tuyệt vời xin cảm ơn đã chia sẻ với khán giả

@user-zc8vz7jn2r 7 ай бұрын

Good work

@GARLENILSON1 7 ай бұрын

Excelente 👏👏👏👏

@skyloveglobalnelsonbarbonc8009 7 ай бұрын

Ive always watch how you di it ❤❤❤🎉🎉🎉😮😮😮😮😮

@batamkepri2109 6 ай бұрын

Maa syaa الله.....bagus kali ini mas bro...mantap...trimakasih

@skyloveglobalnelsonbarbonc8009 10 ай бұрын

Good test

@skyloveglobalnelsonbarbonc8009 7 ай бұрын

❤❤❤

@bandileale8270 Ай бұрын

🎉🎉 can you please tell me more about the motor

@tytorobotics Ай бұрын

Thanks for your comment! The motor is the Titan Air TA130 by Xoar. Here is some of our data from tests using this motor: database.tytorobotics.com/motors/3x6/xoar-ta130-25-kv80

@user-js8xj9lq6b 8 ай бұрын

Красивая девочка! И умненькая!

@SR-gs8zo 3 ай бұрын

but your prop ran reverse at the intro...so even the basics are unknown?

@vidmantasbrasas8549 8 ай бұрын

👍👍👍👍👍👍👍👍Siuper

@oz93666 7 ай бұрын

Conducting a test inside a room where the trust hits a wall must greatly effect readings compared to test outside?

@TheGRENHORN 7 ай бұрын

in Austria we called it "Bodeneffekt" and I belive your right.

@elektron2kim666 7 ай бұрын

They have a chimney or something unless it's all for a single video.

@stephenchibansa2965 6 ай бұрын

How much is motor and propeller cost price

@frking27 7 ай бұрын

What is the name of the aluminum block rod, that you're used in the video

@tytorobotics 7 ай бұрын

If we understand your question correctly, they are called T-slotted beams

@customdevelopment136 Жыл бұрын

Nice stuff! Could you please tell me the power to mass (thrust) function you use? P = F(M, D, rho) where D is prop diameter. I have seen 3 different versions, and do not know which is correct. Thanks!

@charlesblouin3601 Жыл бұрын

Hello! I am one of the tool's designer. The formulas you find online and in research papers are great approximations for starting out and selecting which range of prop will be needed. You'll will typically then need experimental data to obtain exact and comparable figures. You can look at our database (database.tytorobotics.com) for such data or use one of our tools.

@LydellAaron Жыл бұрын

Power calculated via current and voltage, from what I recall. Thrust measured from a load cell thrust sensor. Torque measured by load cell.

@customdevelopment136 Жыл бұрын

@@LydellAaron -- Hi is there a formula? I don't have thrust or torque sensors.

@LydellAaron Жыл бұрын

@@customdevelopment136 oh, I thought you bought one of their units, and were asking which equation they used in their system? (P = IV). My mistake.

@customdevelopment136 Жыл бұрын

@@LydellAaron The equation looks something like P=(Mg3/npi)^1/2/r. If you have prop diameter and load, then you can calculate power needed.

@shivanshshetty7979 Жыл бұрын

How much KV motor would be sufficient for providing 5.5kg thrust

@tytorobotics Жыл бұрын

Hi Shivansh, that's a good question. I pulled some data from our motor/propeller testing database (database.tytorobotics.com/tests), and used the filters to look at motors providing at least 5.5 kg of thrust. Motors that reached 5.5 kg included KV120, KV80, KV29. Hope that helps!

@natthaphonchaisupha4646 2 жыл бұрын

Hi please help me for calculating power of quadcopter into fly hovering

@tytorobotics 2 жыл бұрын

Hi @Natthaphon, thanks for your comment. I think you will find this article from our website helpful for making your calculations: www.tytorobotics.com/blogs/articles/how-to-increase-drone-flight-time-and-lift-capacity

@customdevelopment136 Жыл бұрын

@@tytorobotics -- Thanks for this wonderful article! Question - As you know hover ratio Hr = T(thrust kgf)/P (W) is proportional to 1/D (prop diameter m). So shouldn't the first thing to improve efficiency Hr be to use a longer propeller -- which may require a larger frame and a stronger motor? I can understand that some people already have a frame and must use it. But others may be in a position to purchase a frame. Aside from the issue of practicality, what stops us from having a larger and larger propeller and boundless efficiency? Is there a physical law that limits large diameter props efficiency?

@charlesblouin3601 Жыл бұрын

@@customdevelopment136 Hello! I am one of the tool's designer. You are right that increasing the propeller size is on of the first option to look at to increase efficiency. The limit of propeller size is the impracticality of having larger propellers. They are slower to react to disturbances, heavier, and require a bigger airframe. For extremely large and efficient propellers, look at the records of human powered helicopters; kzfaq.info/get/bejne/qd96pJRhqrfPn5s.html! You can see how such vehicles would not be very practical outside of those competitions.

@George25 Жыл бұрын

Where do you get the propellers from ?

@tytorobotics Жыл бұрын

We get them from a couple different sources, mainly Xoar and Mejzlik.

@George25 Жыл бұрын

@@tytorobotics Xoar don’t sell to individual buyers !

@biswanathghorui5405 3 ай бұрын

What is the Market prise of this types drone+ propaler+ controlpanel + cerki + leghium. Battery . please more videos. For complit. Chart .🎉🎉🎉motor and. Battery longibity / lifetimes ???

@batamkepri2109 6 ай бұрын

I am interesting this video How can i get the more information for this video Thanks, Jaelani Batam Indonesia

@tytorobotics 6 ай бұрын

Hi Jaelani, you can visit this page here for more information: www.tytorobotics.com/pages/series-1780

@batamkepri2109 6 ай бұрын

@@tytorobotics How money price for this produck

@tytorobotics 6 ай бұрын

@@batamkepri2109 Contact our sales team and they can prepare you a quote: www.tytorobotics.com/pages/request-a-quote

@batamkepri2109 6 ай бұрын

@@tytorobotics semoga sukses ya ka' trimakasih

@thestrongman11 8 ай бұрын

How much thrust gives that size propeller? , I mean the maximum thrust

@tytorobotics 8 ай бұрын

Good question. It depends on a lot of factors, but a prop of this size (48" diameter), would probably max out around 50 - 60 kgf of thrust

@thestrongman11 8 ай бұрын

@@tytorobotics thanks so much😁

@user-js8xj9lq6b 8 ай бұрын

@@thestrongman11 we had about 55 kgf thrust with our 1,07 m prop at 17 h.p. on our motorhangglider

@melonshop8888 8 ай бұрын

@@tytorobotics YOU CAN YOU THIS IN YOUR NAPSACK.

@skyloveglobalnelsonbarbonc8009 Жыл бұрын

How to buy the product

@tytorobotics Жыл бұрын

Thanks for your question! You can select settings for the product here and get a quote from our sales department: www.tytorobotics.com/collections/all/products/series-1780-thrust-stand?.com

@aaronmarkstaller 7 ай бұрын

What motor and esc is this?

@tytorobotics 7 ай бұрын

It's the Pulse P200 ESC and the TA130 motor, both by Xoar

@skyloveglobalnelsonbarbonc8009 10 ай бұрын

Where we can buy that motor madam

@melonshop8888 8 ай бұрын

BUILD YOUR OWN. YOU ONLY NEED SOME TOOLS. :3

@prasannakumar6512 8 ай бұрын

@@melonshop8888 how to build

@user-ml8gn5yi8j 4 ай бұрын

whats the name of that motor .please send contacts for ordering them

@tytorobotics Ай бұрын

The motor is the Titan Air TA130 by Xoar: www.xoarintl.com/brushless-electric-motors/titan-air/titan-air-TA130-light-weight-pro-series/

@JoyDas-dr3xg 25 күн бұрын

haw to mak

@lucianofeliciano2064 7 ай бұрын

Boa noite quanto custa o kit para o Brasil 🇧🇷

@tytorobotics 7 ай бұрын

Nosso distribuidor no Brasil poderá responder sua dúvida: www.tytorobotics.com/pages/distributors

@user-xq3ty3oy7r 11 ай бұрын

Price

@tytorobotics 11 ай бұрын

Hi Babuthapa, thanks for your comment! The price will depend on which size and configuration you need. We don't give out pricing information on KZfaq, but you can contact our sales team with your requirements if you want a quote: www.tytorobotics.com/pages/request-a-quote