I don't have a 7800x3d, I'm not looking into fans and coming solutions right now, but ... Your videos are such a treat, the delivery, pace, editing, clarity, structure. You're doing an awesome job.

It's funny u helped me find the most compatible cpu cooler for my itx three years ago and now for my brother I found u again only having the most in depth video's of the more fine tuned and alternative cpu coolers or any combinations of computer tech. Thnx for your help!

Great to see the 67mm coolers review - especially the new IS-67-XT which I'm considering to purchase. Your videos are always very informative and helpful. I would love it if open bench tests are also provided. It would provide a good evaluation of the maximum cooler capabilities and also allow for comparisons with other open bench cooler data widely available.

Thanks for this test as a fractal terra user this helps alot! Great video as always

Discussing and showing the mounting orientations is so helpful for build planning. Thanks a lot!

I'm prepping for my first mini ITX build and been binging these videos. So much useful information in all of these. Also, love the taiyaki shirt. lol

Long time fan! Awesome content❤

my goat teaching me everything i need to know for my upcoming fractal terra build

You tempted me to build my own NP200P back in the pandemic, now you are tempting me with the Terra!

I was looking for this comparison somewhere days ago and poooofff your video came out today haha thanks for this

love your channel!

Wow, I'm shocked these work as well as they do. This speaks to all partners: AMD, ID Cooling, and Fractal Design. Quite impressive!

Thanks to your videos of the NR200P case, I switched from a Dan A4-H20 case to the NR200P. My 4090 GPU temps dropped from 80c to 63c. GPU is mounted at the bottom, with glass side panel, and to get the temps this low I installed Phantek T30 fans at the top, plus I taped over all the vent holes on the other side panel, back and top of the case to maximize air flow from bottom to top.

those side panels causing more noise is a deal breaker for a case this expensive

Another excellent video! With a 7700 in a Terra I went from L9A with the fan duct to L12 Ghost with the stock fan. I’m still getting idle temps around 50-55 and gaming spikes to ~85. Is this to be expected with an L12? Or could this indicate I haven’t attached the cooler correctly?

For anyone coming here to settle the decision, I have experience with both of these coolers. I have a terra/is67/12600k and a terra/axp120-67/12400f. The 12400f is quieter, but I think it's because I switched the fan to an nfa12x15, and the chip just stays cooler because of the power requirements. The 12600k is on a z690-i strix and the 12400f is on a b760-i strix. I'm going to get rid of one of the green terras, and get a black one. The black one will have the b760-i/12400f/and will probably try to get a nfa12x25 on there, since there is still a fair bit of room left over. They're both great coolers, like M&M showed. I think the build quality is better on the ID cooling one. The packaging, unboxing, and mounting hardware all just feels more premium on the ID cooling, however, the thermalright does keep those thermals right! Just get whichever one is cheaper, or get the ID cooling if you want a black one w/o RGB.

I wonder if using that noctua foam isolators between the fan frame & the side panel will reduce the noise.

Hi, great job! Thanks for sharing with us. Do you have in plan tested "Deepcool AN600" (TDP 180W)?

Curious what you recommend for the best sub 55mm cooler for the 7800x3d! Great video as always

Would like to know what settings you have the spine in so that I can possibly run one of these without the turbulence. How far away would you have to set the is67 and in what position? Also what size GPU thickness would remain comfortably?

Please machines & more! Give us a test review of these coolers with the noctua A12-15 ans A12-25mm fans.

I might have missed it but what spine position do you have the case in? I'm considering the IS-67 and already bought my GPU I want to know if it would fit. It is 2.7 slot card at 55.88mm thick. Will the IS-67 fit, or should I go with the IS-55?

I have a BS3 in my Terra, didn't realize they were end of life. I did swap the fan with a Noctua 120x15 chromax, would love to know how all 3 compared with the same fan.

I really like how you are testing these on ryzen processors. This is probably the best way given the boosting behavior

Do you reckon this data will translate to other similar cases such as the ZX-1?

How similar are the heat sinks? The coolers seem nearly identical. From my research the fan pn the id cooling fan has higher cfm and statoc pressure. Maybe thats why it wss a tad cooler.

Would love to see a comparison against i55 with a 25mm thick fan

I wonder how they would perform with the same fan! Might be worth a comparison to see which heatsink is the best. (I always tend to swap the fans out for my slim Noctua fan anyway!)

Hey man I just want to say thanks. Had a L9I which was a terrible idea for m 13600k. From your previous video I switched to the LS-12 Ghost edition and its perfect. There's no turbulence, its quiet and cool.

Also is67xt has extra mounting bar for AMD different install orientation

Its a mystery why you don't have more subs. Thank you for the very informative content.

Any benefit with 25mm fan in terra for those using it in setting #1?

You're in my head I have the AXP 120x67 and was thinking ofupgrading to the 7800x3D

I am planning on building a mini ITX build with the axp90 -x53 do you think if i lap the cpu or delid it it can cool it enough to stay sub 85 c on a undervolt

Very interesting comparison. I’m curious if having some kind of shroud from the fan to the side of the case like the one Noctua makes will help reduce noise

Ugh, I went with the 207 Slim XT. Wish that I would’ve researched more.

Hello, I can see that you've done quite a few test specially on Terra case. Have you made sort of a graph for the best SFF CPU cooler? I was planning to buy Noctua NH-L12S on 7800x3d with B650E-I MOBO. I would be grateful if you could let me know how NH-L12S is comparing with these (specially noise level placing the fan undearneath the sinsk). Kind regards, E

Can you please test both of these with a Noctua fan instead?

I wonder if this cooler will be able to cool my 7500f at light browsing without spinning up the fan

Would also be interesting to see the Deepcool R-AN600 compared to these

Question, which performs better. IS-67XT, or IS-55 with 25mm fan? They are the exact same height. One has more heatsink and one has more fan. You're one of the very few creator that has both coolers.

What about Deepcool AN600?

I’m using a axp90 x47 fc and it works amazingly. 67mm overkill imo

Hallo sir, im using the Thermalright SI-100. On desktop im between 40 - 55 degree and gaming 55 - 75 degree. Is this fine or will this kill the longlife durability?

I find the L12S is great, maybe the AXP120-67 if you don't mind the noise for >140W

Goddamnit, just as I've bought AXP120-X67 3 days ago 😢

holy I may as well stick a vornado on that

👍👍

Just ordered the ID cooling 67 xt. Anyone have any problems with it?

No matter what, I think a Noctua 15mm or 25mm fan is the best configuration. I chose a 25mm with a 7900xtx with my config but it wouldn't work with a 4080 for example. A 25mm will work with a 4070 at most.

should have shown the graph comparing these to all the other coolers from the last video....

noctua l9x65 a ton quieter, even at up to 1800 rpm, maybe try that one

たい焼き素敵❣️

めっちゃ気になる・・・たい焼き

id cooling is insane lol , it even comes with little box for small parts , also it is the cheapest among these 3

Yikes, the noise frequency (not just the boosted level) with the fans next to the side panel - intolerable!

axp120-67 inside terra has terrible turbalance

just use a juishark cooler....

When will these hardware manufacturers wise up and change the design so that we actually mount the CPU to the cooler first and then install it onto the motherboard. This idea of putting the CPU in the motherboard, applying paste, and then blindly placing the cooler on top of it, is ridiculous.

lian li dan h20 it's better at a similar volume

Use rendering to test cooler performance? Lmao