Passenger side fix: If you look on the connector for the passenger side switch there’s a small black wire next to light blue. It will be marked “J” on the connector. Ground that wire and passenger controls will work. Thanks to those that shared this info with me.

Just did my conversation. On the passenger I had the same issue. I ran a second ground and touch every pin till it worked. I believe it was the dark blue to ground that made it work. Use this video for most of the install. Thanks bro.

Wow someone finally made a video on how to do this thanks!

Thanks, this was the least complicated way to do it, so much easier but less professional

I just twisted the 3 skinny black wires together on the switch, and it worked

I did Connected everything like u said but passenger side won’t go down or up not even from the driver side switch

Great video. Thnx Man. I’m currently doing the exact same thing. I’m using switches from a 2002 Tahoe. Nicer switch bezel IMO.

Man I followed exactly what you did and it works flawlessly I can deal with the passenger side only working from my side keeps my kids from rolling down the window lol !! Thanks for the vid

The driver side power was the green what about the passenger side power?

What does the big dark green wire do on passenger door switch? Is it the main power for the window?

Question, both my windows work driver with driver and passenger work with passenger switch, passenger wont roll down with my driver switch, where did you connect the light blue and brown too?

You can use a four prong relay to

Thanks man! Got me goin

Good video very helpful

I’m attempting to do this to my 06 rcsb I’m using complete doors from my 06 Silverado but I don’t wonna deal with the bcm crap

I did it to mine. passanger has a thin blue wire i grounded and passanger switch worked

I got the windows working except for the driver's side switch for the passenger window

So for the passenger switch, what wire can we add power and make the light turn on? Everything works besides the light, thanks!

What would it take to get the mirrors and door locks to work as well?

Any of u guys know how to do power locks ?

Hey i have 06 Silverado and I did the Oem conversation, I swap out the door hardness and door jams and dash hardness, I got the window to work and mirrors but my door lock switch don’t work, I have extra switches and I swap them but they all did the same thing. I heard u say something bout the bcm. After I swap everything in my truck and went to start it up it didn’t start bec of the bcm. I put my org. Bcm. From old dash and started right up.my question is do u think it could be the manual door bcm why my doors don’t lock button don’t work

Can you help with which wires I need to connect to my passenger switch. Photo if possible? Video got the driver side working but not the passenger

For the lights it’s the 2 small brown wires I wired them to the green lights work I’m working on locks next

What steering wheel you got ?? What are the parts adapter & steering wheel ??

Can you use the same door and just install a Window motor Motor?

Do you know how to wire for the power locks. Gutted the doors from an electric and got the harness so I have electric windows, the lock actuators for the doors too and already have the harness hooked up. All I did was give the windows power and ground without using the fuse panel since mine had no pins and I had to wire it directly. Do you know how I could also wire the locks directly like I did my windows. I also didn't use a relay

SO THE PANELS ASSEMBLE THE SAME WAY AS THE MANUAL ONES ? ALWAYS THOUGHT I NEEDED A COMPLETE DOOR TO DO A MANUAL TO ELECTRIC DOORS THANKS GREAT VIDEO

I got the same issue with the passenger side I tried a switch that works and still nothing so kinda confused on that side.

Did you ever get the door locks to work

el cable azul pequeño ba a tierra para que te funcione gracias me ayudaste a empezar mi proyecto en mi troca gracias bro

Iv3 been working on the passenger nd I cant get it to work

Will 2004 yukon/tahoe door panels work for sierra?

Yo u ever get pass side fixed? If so lmk I'm using this,video to do my conversion

You only 4 of the 5 pin on the relay or I’m I missing something? Thank you

2001 Silverado cubby trick search that

Ni e intake! Gen 3 engine? Or 4

How do you get the power locks to work?

Why is the power still on when I shut the door of the truck ?

Hey where you located bro?

Do the power locks work through this swap?

You need to hook up small grounds on passenger side

Where did you get all the connectors sir ? I have a 2000 gmc sierra that is a base single cab model, and i would like to do key less entry and power windows and the power mirrors with oem parts. Is this video helpful towards me? Thank you so much sir

Anyone else having an issue where passenger side won’t ground?

If my windows roll up slowly or stop and do go up anymore what could it be?

BIG BIG QUESTION BRO WILL THESE WORK ON 05 DOOR PANELS IF SO CAN YOU GIVE ME AN IDEA OF WHAT CABLES PLEASE THANK YOU

Can i use the thiner grounds i dont have the other conector y only have 1

I need help with this

Where you get all the wiring harnesses?and all the wiring?

Hey bro what pin # did u use from the relay to tap in the fuse box

Do your window switches light up at night?

i keep blowing fuses can someone help

What was the total cost for the conversion..

The driver side power is green what about for the passenger side?

All you did was replace the hand crank with a regulator? No other parts needed?

Can you add a list of parts needed please

What amp fuse should I use?

You think it can be done to a 2014?

Shit looks too complicated.. ima still do it though

Would u b able to help me out

whats ur instagram bro i have some questions

What’s your Facebook or how can I contact you bud?