This video is better than the other videos I found on this topic. Simple, to the point

Very good info, I’ll have to start looking for parts and try it out! Thanks for making a great video

This guy explains everything very well and it works great I just used the video for my truck and it all works now !

Just did this on my 05 single cab, great work bro no more manual windows 😅

God bless you bro, thanks for all the info, I'm working on my 04 3500 single cab, I didn't know about the vcm until I watched your video 👏🙏👏👏👏

Great Video buddy! Very instructive! Thanks for sharing.

W videos bro 🔥

Hey boss I don’t know if you’re still replying in this comment section. I have a 2006 Chevy Silverado and my local Junkyard just got in a 2005 Gmc sierra I’m going to take the door panels, wiring harness, window regulators, bcm, and the door latches to do the swap. Everything should work for my truck right even the bcm?

Good looking out G

Now with that BCM will also control power mirrors as well badass man I want to do the same for my truck but I have a 2000 hopefully it works

How many pins did the wire harness connector in the driver fuse box have on your truck? Mine only has 4. Assuming yours was the same way?

Hey man your videos really helped me I just have one question did you get the service airbag message after you replaced your bem I just finally finished the whole power window and power locks conversion but I ran into that problem after I programmed the bem

Man I needed those manual panels

This makes way more sense than the other video I saw. Wish I would have found it before swapping the whole dash harness and causing myself more problems. Anyways, does this also make the power mirrors and mirror turn signals work?

Did the new BCM come out of a truck with the push button 4WD? Gonna be doing this swap soon with parts from a Yukon Denali into a Sierra WT with the manual 4WD and don’t want to have a service 4WD light

Your video is great. To the point. Good explanations. I have a question, though. I have an 01 silverado. Power windows and door locks already. I am trying to convert the switches(windows and door locks) to the 03-07 style. I have everything i need, except the wiring color codes for the 03 switches. Do you have that by any chance?

Solid video bro, im Gathering parts to try this on my 03 now. Any idea how you could get a key fob to work ?

Useful asf

Ima be trying this on mine …

Best video on this. Did you figure out how to make them faster? I did mines but they’re super slow.

What cables do you need to lower down the passenger window from the driver’s side, I have a 2004 chevy Silverado single cab

What’s up bro think you can make some sort of drawing for the wiring ? Clean man I’m looking forward to do this thanks !

Sorry if it’s a dumb question I haven’t taken apart my truck but do I need the rods as well from the donor truck or can I use my stock ones for the power locks?

Chingon ahorita estoy haciendo la puerta del chofer de mi troca aver si keda

Finna do this to mine ima just end up buying the same color doors but with power windows so all there would be left to do is the wiring

Quick question bro I was wondering if yours had the pin connections for the passenger side on the fuse block for the black connector on the harness I was trying to figure out how to make the passenger connector to work and make the windows go up and down.

Was your truck a WT? My wiring is a bit different. Also, the green wire you tapped into on the BCM, do you know what its for?

Cool second video I've seen of some one doing it this way. Safe to say it works. Some. Day I'll get it done. You can now also add power mirrors. They plug into the window switch.

🔥🔥

Awesome video bro. Got my windows working but I had a few q’s. There are two red wires under the steering column, which one do I tap into? Also, I was going to order a used bcm to get my locks and interior lights working, do you know which vin or part number I need?

For the body control module what do u need is it just the box or the cables

Can you do a video for 99-02 or is it the same wire set up even if it different colors to the wire you have

Hey bro after you did the conversion did your airbag light turn on? Lmk because mine did and I was trying to see if I can get rid of it. Great vid btw! 👍🏼

This will work for my 2002 right now

So all the wires and wiring harness is from another Silverado? Any Silverado from those years will work With the same wiring harness oem & is there something you watched or looked up that help you wire up everything because im still confused for the wiring part!

ik this from a while but does the bcm show the vin number from the other truck? if so wouldn’t that mess with when they scan it on the obd port?

Do you have a videos on power mirrors and power and heated seats

Ended up doing the swap and pulled a BCM out of a truck with power windows and locks etc. Did you have a service air bag light come on?

So, I have 2000 gmc with manual windows and recently got complete power doors with harness which wires should I take from Silverado to make my swap more oem or easier? Should I take bcm? Thanks you ahead of time

after you switched the bcm, did you still have to splice the green wires? also, what did you connect to make the locks move? i know you connected the bcm but did you also add actuators? i’ve been searching for months on how to do this with oem parts and you answered almost all questions ive been looking for. edit: also what did you splice the motor wires to (the ones you put on the battery to check if they worked)

I just did mine and it worked except the door lock on the passenger side does not work from the driver side but from the passenger side it does work all the way around

are you parting out the rest of the crew cab? if so, where are you located?

Could i also just get full complete power door already n swap full doors with everything already done just would need the wiring part ? My doors are all dented bad so i have to swap door regardless? Would it be easier ?

One more question boss, does the bcm have to be from the same chassis truck. Mine is a 2500 I’m trying to do the swap on. The wiring and bcm I got was from a gasser Denali yukon. Could I still use it to do this swap?

Hey man so I’m doing the same swap to my 04 work truck but where my fuse box is I only have 4 wires where you plug the harness in did yours have the same?

Henry im doing a conversion from manual to OEM power window but I got power going yo switch but I can't get power out from switch does the switch have a secondary power for it to operate looks just like you switches

Did you swap out the drivers side fuse box from the doner truck? Mine doesn’t have those relays there

Quick question.. couldn’t I get the whole door with power windows tHE same year truck can I switch tHE whole doors & dO that wiring like yOu did

If I do this on my 2005 Silverado regular cab, would front doors from an extended or crew cab truck fit mine? Or the mechanism from those doors? I don’t even know what a BCM is, but would a regular cab’s with power windows one be best for my truck? This computer controlled stuff on newer than 1985 vehicles is so confusing to me. I’d probably have to order everything from eBay or GM anyway. It’s probably not affordable for me, but it’s sure interesting to know it’s possible. I’ve seen some videos on universal kits to give me power windows and locks that are probably more affordable for me right now. Thanks for your instructional video, great job on what you had to figure out how to do yourself. What you’ve done is exactly what I wish I could do. Enjoy your power windows and locks. Edit: I read some more comments and learned that the engine from a donor truck must be the same. Mine is a 5.3, but what does “drive by wire” mean?

When you did this. Does the door still get the signal when it’s opened? Or do you have to wait for your truck to time out to shut everything off?

Hey bro did u use the harness from your crew cab or did u had to get sum from like a extended cab?

i just connected my wires together (the blue and brown ones” to the harness the window still won’t work my truck came with power windows any suggestions??

I’ve had a single cab for 2 years now and I’ve saved your video not to long after. Well the time has come, I bought 2 entire doors off FB marketplace. I swapped everything I needed and got it the majority done over the course of two afternoons. I ran 16-14 gauge wire with a 20amp max in line fuse and I’ve blown two fuses so far. I didn’t realize the first time but the second time was when I rolled both windows down at the same time. Should I run bigger wire and bigger in line fuse or just bigger fuse ? Side question the drivers side doesn’t want to stay locked, it’ll lock and immediately unlock, when I press the switch any ideas ?

Did you do any extra wiring for the power locks to work or just the electric widows? Also what exactly was the problem with the dome light? You swapped a new bcm to get the light to work??

Do I need to swap the bcm out for one that has power windows wired every thing already getting power and all but the switches aren’t making the windows go down and my truck a 99 base so the bcm probably don’t have the power windows

Im doing this on my 03 ram i replaced the in cab harnesses and door harnesses and installed the doors lock mechanisms but on the window motor track/bracket the Ridgid arm off the motor is at a different angle 😢 so i gota figure one that out😂

Im trying this on a 2000 do you know what that green wire in the pcm does my pcm is difrent just tryana see what you spliced into

hey u think I can use oem power window harness from a 01 extended cab for my single cab 01 chevy?

Did this truck have power locks and manual windows before?

Hey bro I just did the conversion on my 04 single cab. How do I remove the air bag light and the “service airbag” message? The bcm i used came off a single cab 03-06

What about the power mirrors?

You just get the electric harness plug and play and just wired power correct

what wires will i need to get? do i need the harness from the dash as well?

I’m doing this on my 06 cateye v6 but i can’t find the cable placement on the driver side Your way for passenger worked but can’t seem to get the driver side to work any way I could get help

How did you know what fuse to use for your power for the windows?

Ay I tried to do this and I swapped the window engines over and the locks and I tested them and they work but when I tried to do the wring the harness I have has 4 orange skinny wires and some others think ones that are not orange I tried to give the 12 v to 2 of them and nothing happend idk it’s not working

hey bro i did an electric conversion and i dont a bcm and my truck keeps on draining my battery because everything stays on when the truck is off if i get the other bcm will it fix that

This might sound like a stupid question but did you use the wires from the old harnesses to connect the wires from under the dash or were they just from auto zone?

Will the power mirrors and power folding mirrors work with this?

Which red wire did you splice into, there is 2 of same gauge

The only thing that happened with mine was my cluster stays on at all times a lil annoying but o well

I have a 02 Silverado and I have everything on already I just don’t get the wiring I did the same thing u did at first and did not work do I have to buy the bcm from another truck ?

So the orange wires theoretically I just have to put them together and run them to the other side? Or am I just running one to one side for the red wire and the other one for the other side and then connecting them?

Aye Broo so what wires on the bmc do I have to Tappn to in order for the turn signals on the Mirriors to work

When you shift into reverse or drive do the doors automatically lock?

Have your figured out why the turn signal stay on the passenger side or don’t work

Hey @Henrylxt what part of Texas are you in I'm in Houston I want to do that conversion on my 2001 single cab

how did the fuses for unlock lock and driver unlock stay in? mine don’t have prongs inside

😂😂 I converted my truck to manual windows and haven't been able to find any door panels in dark gray like the ones you took out. So my truck looks just like yours inside. Gray interior with tan door panels 😂😂

You didnt swap the doors? Most do that. I need to try this

How’d you get the lock/ unlock botton to work going to do this on my 99 Silverado currently has Work windows

what year harness & window switches did you use?

So on the passenger side are supposed to take out the the box where the harnest goes and splice the 2 orange wires together and put it back in the box? Kinda confused on that part but every thing else makes sense

Do you have to switch the bcm in order for it to work?

Can you just swap doors? I need my truck repainted so color won’t be an issue for me

So can you add electric mirrors?

Can you program a key fob doing it this way?

Alright i have one more dumb question lol. I swapped out the bcm and got did the 3 10s procedure. How do i get the air bag light to turn off. Not sure if anyones run into this issue

nice, im doing the same swap on my 07 classic. did you have to get the bcm reprogrammed?

Do I need to have the matching bcm to the wiring and harness?

Also what was the reason for swapping the bcm?

Im sure someone in here asked but i got an 05 and im currently swapping out to electric , can i use my stock bcm just for windows or do i need to change it ?

If i want to have only 2 switches and not 4....would i have to buy the whole switch, or could i just buy da window switch bezel

Does the door power turn on now that you changed the bcm as well?

So first we program BCM then we do wiring right ?

Hey bro question, if you know.. if u change the bcm first then die the power windows do I have to still do the wiring modifications??

@Henrylxt do you still have to splice the orange wires when you use the bcm the way you did

Ok found the 12v constant, passenger side window works, do i need to swap bcms to make the driverside work?

Nice video, pal! How can i contact you? Id like to ask a little bit about the wiring

yo bro i did mine pero my dash lights and radio stay on after my truck is off