In this detailed video, I show you the step-by-step procedure of overhauling the complete coolant system on the Maruti Zen. Thanks for watching! :)
Пікірлер: 61
@ashtoncastelino4 ай бұрын
Great work Ganesh ! Small tip i'd like to add is to squeeze the hoses as you pour the new coolant. It will help eradicate air from the cooling system. The thermostat valve has a air bleed valve. As you squeeze the hoses the coolant is pushed in and at the top radiator cap you can see the air bubbles
@GaneshBalan4 ай бұрын
Thanks Ashton. I’ll keep it in mind. 👍🏻
@prasthoopbalussery2663Ай бұрын
Perfect work, good presentation and explained various parts used with part number
@GaneshBalanАй бұрын
Thanks a lot Prasthoop. 😊
@janunme4 ай бұрын
good work as always Ganesh
@GaneshBalan4 ай бұрын
Thank you Rahul. 😊
@rohitsiddhartha41764 ай бұрын
Also change old radiator cap for better opening way to reservoir coolant tank
@GaneshBalan4 ай бұрын
Thanks for the feedback man. Will keep it in mind. 👍🏻
@mahendranr13174 ай бұрын
Very exhaustive cleaning with clear explanation.
@GaneshBalan4 ай бұрын
Thank you Mahendran. 😊
@mahendranr13174 ай бұрын
@@GaneshBalan Do u use a different solution for cleaning the radiator
@GaneshBalan4 ай бұрын
@mahendranr1317 For flushing, I’ve used Mannol radiator cleaning concentrate.
@ivanfernandes3746Ай бұрын
Wow, what a fantastic video and such clear explanation and attention to detail...truly inspiring..personally i too would like to embark on a zen restoration project but how are you able to source the parts?? I tried looking for a new zen carburettor and that itself was impossible..well done and keep up the good work...
@GaneshBalanАй бұрын
Hello Ivan, thank you for the feedback. I really appreciate it. 😊 As regards parts for the Zen, Maruti has nearly stopped all the parts but whatever is stashed away in some random corner of some MGP store’s warehouse can be traced using their system. If you approach them with the part number, they can search and see if it’s there somewhere. As for Carburettor, get it from KPACCO, New Delhi. Amar is the contact person, +91 95995 57487
@ivanfernandes3746Ай бұрын
@@GaneshBalan many thanks for your suggestion, will see if I can get the engine started and then consider further repairs..
@brittoschristozachariah72804 ай бұрын
10:44 I just want to let you know that the vacuum check valve for the hot restart system in your carburetor is installed incorrectly. The black side should be the inlet, and the red side should face the hot restart actuator (diaphragm).
@GaneshBalan4 ай бұрын
Thank you Brittos, I’ve checked. The black side is indeed the inlet side and red side the outlet. The tubing on the outlet side (red) is longer and giving an impression that I’ve connected it the other way.
@brittoschristozachariah72804 ай бұрын
@@GaneshBalan Now it makes sense. And great video as usual btw
@leelaswaroop4 ай бұрын
GREAT bro keep it up 💪👍
@GaneshBalan4 ай бұрын
Thanks a lot Swaroop. 😊
@HUNTERGAMING-zi7os4 ай бұрын
Sir Gannu we are missing ur VW content 😢🙏
@GaneshBalan4 ай бұрын
Haha dude, I’m nearly done with the Polo DIYs. There’s one scheduled for this Sunday so watch out for that. Front parking sensors is in the pipeline but mostly pictures since I did not click any videos.
@HUNTERGAMING-zi7os4 ай бұрын
@@GaneshBalan ❤️ finally
@soulrevealer4604 ай бұрын
Good detailed video mate, but might I suggest not to rinse the cleaning agents or other corrosive agents down your bathroom drain for environmental reasons. Plus this might act as incriminating evidence if the municipal corporation stumbles upon it. It was commendable what you did with the coolant by putting it back in the empty water jugs.
@GaneshBalan4 ай бұрын
Thanks. I’m wondering where else could one wash this condenser coil without letting it drain this way. Do you have some ideas?
@soulrevealer4604 ай бұрын
@@GaneshBalan That's a good question, maybe wash it in one of those containers like the ones we have for collecting oil or something similar.
@Imjoe1594 ай бұрын
Polichu👏🏻👏🏻👏🏻
@GaneshBalan4 ай бұрын
Thank you Jorly. 😊
@kombon100Ай бұрын
Good explain.. Bro... ❤ i need carburetor parts, where is available pls..
@GaneshBalanАй бұрын
Hi Jomon, please check with your local mechanics and spare parts shop. Very hard to get nowadays. Complete carburettor assembly is available from KPACO. Contact Mr Amarnath Sharma - 95995 57487.
@parthiban3211Ай бұрын
Brother i am owning a exide care showroom, and i do own a 1996 zen, i recommend not to use exide distillo - distilled water for coolsnt since it contains some acid mixing in it, which may corrode the cooling system
@GaneshBalanАй бұрын
Hi Parthiban, thanks for the advice. Point taken.
@vphaneendra4u4 ай бұрын
😊
@GaneshBalan4 ай бұрын
🥰
@gkautomotive4 ай бұрын
Can you explain the use of the thermostat switch here ? Aren't these thermostats supposed to automatically open when the operating temperature is reached ?
@GaneshBalan4 ай бұрын
You’re right about the thermostat. The thermostat switch turns on the cooling fan behind the radiator when the coolant temperature crosses a threshold.
@nishantha85112 ай бұрын
Can u pls send the radiator clambs bottom and top part numbers
@GaneshBalanАй бұрын
Hi Nishanth, the parts numbers are as follows: 1. Top mount 1 - 17861M72F00A 2. Top mount 2 - 17862M72F00A 3. Bottom bush - 17879M70B21
@user-xv2st3vk2x4 ай бұрын
VW polo 2015 model ... Not working my safety Lock switch. Is this cording issue or need to replace the Switch?
@GaneshBalan4 ай бұрын
Which safety lock switch are you referring to? The child lock or the door lock switch assembly?
@user-xv2st3vk2x4 ай бұрын
@@GaneshBalan i fixed it big brother
@user-xv2st3vk2x4 ай бұрын
Brother.... VW polo 1.5 TDI Highline 2015. - Right side Fog lamp ke pass ek "Plug" hai . Woh 2nd "Horn" ka plug hai kya???
@GaneshBalan4 ай бұрын
Haan ji.
@user-xv2st3vk2x4 ай бұрын
@@GaneshBalan koi Wiring hardness chahiye ya direct Plug and Play hai?
@GaneshBalan4 ай бұрын
Plug and play. Low tone horn nahi diya hein.
@user-xv2st3vk2x4 ай бұрын
@@GaneshBalan part number kuch bata sakte hein kya. For my vw polo 1.5 tdi highline 2015
@GaneshBalan4 ай бұрын
6RF 951 221B
@Pepper_Mint_4 ай бұрын
Still waiting for showing vaccum connection video
@GaneshBalan4 ай бұрын
It’s done and scheduled. Will schedule it for one of the Sundays in May.
@Pepper_Mint_4 ай бұрын
@@GaneshBalanEagerly Waiting
@user-xv2st3vk2x4 ай бұрын
Volkswagen polo 1.5 TDI highline diesel 2015 .. which coolant need G12+ or G13?
@GaneshBalan4 ай бұрын
Both of them works. Buy whichever is readily available. Please check if it is a concentrate bottle or a premixed one. If you’re buying a concentrate bottle, use only good quality distilled water.
@user-xv2st3vk2x4 ай бұрын
@@GaneshBalan thanks
@user-xv2st3vk2x4 ай бұрын
@@GaneshBalan I purchased Mannol g12+ coolant .. Can i Add Distail Water on This coolant??
@GaneshBalan4 ай бұрын
@user-xv2st3vk2x Please check what is mentioned in the coolant bottle - if it is a concentrate, you need to add distilled water. If it is a premixed coolant, you have to add the whole bottle without adding distilled water.
@user-xv2st3vk2x4 ай бұрын
@@GaneshBalan ok big brother.. by the way where are you from? Nd can you understand Hindi?