A new sawmill I will adding to the operation this year

Рет қаралды 1,464,444

4 ай бұрын

This swingblade Turbosaw is an incredible sawmill! I went to Texas to check it out at Smith Sawmill Service who sell them in North America and decided to order one. They are manufactured in New Zealand and the model I wanted to buy was sold out at the time but now a new container load has arrived in Texas and I need to go pick mine up 😁👍. Just need to decide if I have it shipped or if I take road trip #woodworking

Пікірлер: 312

@mikemcnevin1785 4 ай бұрын

I'll bet the smell of the freshly cut wood, smells absolutely amazing!!

@dustylumberco 4 ай бұрын

It does 😁👍

@bilalwoodworking70 4 ай бұрын

Please my support 🙏🙏🙏

@bilalwoodworking70 4 ай бұрын

Great job 👍

@tomweiss6621 2 ай бұрын

Not a safety feature or a guard anywhere...looks cool...but wear a bullet proof vest!

@davidmyers9480 23 күн бұрын

Do you need a CDL to operate a computer driven lathe? 😂

@alindorindicu3732 4 ай бұрын

Quite amazing, quarter wood cuts, the best, well done !

@dustylumberco 4 ай бұрын

Thank you! Cheers!

@torstenjoergensen 4 ай бұрын

I went from a Woodland Mills bandsaw to a swingblade (Lucas Mill). What a difference! Speed and accuracy are so much higher on a swingblade and no hazzle with turning the log constantly. Looking forward to see you use it. And thanks for all your videos - you really make every joint look easy and fun.

@dustylumberco 4 ай бұрын

Right on Thank you very much

@grumblycurmudgeon 4 ай бұрын

Boy you are DETERMINED to show there's nothing can't be done with a radial arm, huh?

@vikassm 2 ай бұрын

@@grumblycurmudgeon +100 This comment is seriously underrated!! Almost spat out my coffee 😂😂😂

@gilmoreskeen1234 3 ай бұрын

The Company or person who invented this machine deserves more than monetary recognition,that machine is so so efficient and effective.

@dustylumberco 3 ай бұрын

🙌👏

@rv-pk5lk Ай бұрын

I could not agree more 👏🏻👏🏻👏🏻🤍🇨🇺

@chrisbull9357 4 ай бұрын

Very good choice. I’ve a M10-28a for 2,5 years and never regret.

@dustylumberco 4 ай бұрын

👍

@graemediesel2936 4 ай бұрын

Interesting. I’ve never seen a sawmill like it before.

@dustylumberco 4 ай бұрын

Very cool

@johnpandolfino8663 4 ай бұрын

Amazing piece of equipment.....

@dustylumberco 4 ай бұрын

🙌👏

@jimeverden2244 4 ай бұрын

I remember when you first saw this bad boy. And look at you now. Way to go buddy 👊💪🇨🇦 HAPPY NEW YEAR 👊

@dustylumberco 4 ай бұрын

Thanks! Happy New Year

@jeremiah-om7zl Ай бұрын

I'm used to old-school sawmills. This is a true game changer ❤

@dustylumberco 7 күн бұрын

It's pretty awesome!

@douglaspeifer1404 2 ай бұрын

I love this❤️❤️ the lumber you are cutting is absolutely gorgeous💯🌈

@dustylumberco 7 күн бұрын

Thank you !

@FirewoodfromtheSawmill 4 ай бұрын

I saw the same machine at the Paul Bunyan Show last year! A very impressive piece of equipment!

@dustylumberco 3 ай бұрын

💪😁

@TheSingofKwords 4 ай бұрын

How much is a new blade? How long does a blade last? Just curious. Totally awesome mill!

@galelongputt 4 ай бұрын

Why is this so much fun to watch? 😮

@dustylumberco 4 ай бұрын

😁👏

@dustylumberco 4 ай бұрын

😁😁

@walterbrunswick 4 ай бұрын

Holy cow, this saw means business!

@dustylumberco 3 ай бұрын

👏🙌

@JFunk717 4 ай бұрын

That thing is awesome!

@dustylumberco 3 ай бұрын

Oh yeah!

@sylviodante619 4 ай бұрын

WoW Nice job

@dustylumberco 4 ай бұрын

Thanks

@gman8557 4 ай бұрын

Awesome. Less waste, more yield Congrats

@dustylumberco 3 ай бұрын

👏

@alichehabi7751 Ай бұрын

Radial arm for the win again!!! Love it!

@dustylumberco 7 күн бұрын

😁

@robertsloane1268 3 ай бұрын

Thsts one sweet looking cutter

@user-wo4wu9zf1m 4 ай бұрын

So cool! I am hoping to order an m10-28a this month. I’m am jealously happy for you , congrats !!!

@dustylumberco 4 ай бұрын

Thanks! Enjoy!

@bretteverett179 4 ай бұрын

One nice machine !

@dustylumberco 4 ай бұрын

Sure is!

@bygino3.0 4 ай бұрын

Hi... My name is Gianluigi. My father was carpenter like you. He didn't use this technology that you have and is fantastic the progress in this work. Thanks for yours video. I love this work, and my father 😊😊😊

@dustylumberco 3 ай бұрын

Very cool!

@jasonrr9817 4 ай бұрын

That little saw blade is adorable, like friendly hampster☺️

@dustylumberco 3 ай бұрын

🤣

@erichargrove2287 4 ай бұрын

Nice, A radial Mill Saw. Thats beautiful😢

@dustylumberco 4 ай бұрын

😁

@MuffinLikesYou 4 ай бұрын

I was like "hmm blade not wide enough to cut throu-" *blade rotates 90 degrees* "OHHHH SHIIIIIIIIIII"

@dustylumberco 4 ай бұрын

🤣😁👍

@ColeSpolaric 4 ай бұрын

I would love to see a band saw version of this that is movable. Imagine being able to take the mill to the tree!

@dustylumberco 4 ай бұрын

I have a portable band saw mill at my shop: kzfaq.info08zoSo0ST9k

@ColeSpolaric 4 ай бұрын

@@dustylumberco yeah, but you have to lift logs onto it. I had some massive pin oak I wanted to mill up (in hind sight that would have been a bad idea) and there was no way I could have lifted it without heavy equipment that would tear up the yard.

@chrisbull9357 4 ай бұрын

It’s possible to move this mill to the log.

@ColeSpolaric 4 ай бұрын

@@chrisbull9357 yeah, but if you want large slabs this won't do it. I guess I left that bit out.....

@chrisbull9357 4 ай бұрын

You can change the head for a wide slabber. I always make a flat top with the Turbosawmill and use my Logosol Wide Slabber to cut the slabs.

@elisabethj.gawthrop9312 3 ай бұрын

Dude! It's a Transformer! 👏

@dustylumberco 3 ай бұрын

🤣🤣

@user-kp8pb4ee2x 3 ай бұрын

That's amazing saw mill

@dustylumberco 3 ай бұрын

🙌👍

@manukashyapart645 4 ай бұрын

Wow ,super, amazing ,I see the first time this technology

@dustylumberco 4 ай бұрын

👏🙌

@AmericansWillRise 4 ай бұрын

That was pretty impressive. Is it programmable, or do you manually dial in the depths of cut, based on what tge log allows.

@louisgovernale598 4 ай бұрын

That is a great set up

@dustylumberco 3 ай бұрын

Thanks! I'm excited to add one to my shop

@davidbowles4457 2 ай бұрын

Outstanding AF Brilliantly done

@dustylumberco 7 күн бұрын

Thanks!!

@channel-ge7gs 3 ай бұрын

Very good 👍

@dustylumberco 3 ай бұрын

Thank you 👍

@dicekar 4 ай бұрын

This is great i bet it increases yield and reduces having to move big pieces. It can also feature in final destination films. How sure are you this massive blade is on there good haha

@dustylumberco 4 ай бұрын

💪👍👏

@craigrichardson4641 3 ай бұрын

Now that is cool

@dustylumberco 7 күн бұрын

🙌👏

@SHAHZADWOOD 4 ай бұрын

Wow what a good feeling 😍😍😍😍😍😍😍

@dustylumberco 3 ай бұрын

🙌👍

@user-ft5oo9lc9i 3 күн бұрын

I suggest you look at the Peterson Swing Blade Mill, Peterson was the original inventor and the company has taken the process to very effecient labor saving levels. Look at the way the system outfeeeds to the stacker. Very fast, very efficient and minimal waste.

@tedemez 4 ай бұрын

Greetings from Poland 🇵🇱👍

@dustylumberco 3 ай бұрын

Hello. Thanks!

@armandoceledon2098 4 ай бұрын

Hoping that this year has started spectacularly, I wish it to remain the same and much more, a hug from a distance, great teacher.

@dustylumberco 4 ай бұрын

Thank you

@ToddLandholm-ch2ng 21 күн бұрын

So cool!

@dustylumberco 7 күн бұрын

🙌👏👍

@joseluisbarcelogaspar7135 2 ай бұрын

Genial el aserradero . 👍👍

@dustylumberco 7 күн бұрын

Oh yeah! I am excited to add one to my shop

@ketankhandekar3198 2 ай бұрын

What a beauty 😍😍❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️

@dustylumberco 7 күн бұрын

👍👍

@ketankhandekar3198 7 күн бұрын

@@dustylumberco Wow !!!!!!!! Thank you very very much sir 😊.God bless you and your family.Have a great life.Take care and stay safe ❤️❤️❤️❤️

@destroywoodusa Ай бұрын

what a great machine

@dustylumberco 7 күн бұрын

🙌👏

@Jhoekstra 4 ай бұрын

I now have a reason to buy one so I can rebuild my shop so it does fit in my rebuilt shop.

@dustylumberco 3 ай бұрын

😁👏

@brischnoor 23 күн бұрын

Very interesting.

@dustylumberco 7 күн бұрын

I think so too!

@mobilfone2234 4 ай бұрын

nice machine but never get too close, looks quite dangerous...

@dustylumberco 4 ай бұрын

👍

@PeterWilliamson-nn9et 4 ай бұрын

Wow impressive

@dustylumberco 4 ай бұрын

👏👍

@nebeljc1 4 ай бұрын

I bet it'll bring you a beer at the end of the day. Badass

@dustylumberco 4 ай бұрын

🤣

@darrenhenry3618 4 ай бұрын

That’s was cool!

@dustylumberco 4 ай бұрын

👏👏

@oliver9089 4 ай бұрын

Holy that made a lot of sawdust double quick time

@dustylumberco 4 ай бұрын

👏

@dhm7815 4 ай бұрын

Wow! Happy New Year!

@dustylumberco 4 ай бұрын

Happy New Year

@puspitaaudiaandini7787 Ай бұрын

Mesin yang sangat modern 👍💪

@dustylumberco 7 күн бұрын

🙌👍

@Sawmillchannel 2 ай бұрын

good cutting machine

@dustylumberco 7 күн бұрын

👏🙌👍

@floraandflannel 4 ай бұрын

Super mill-in-place dimensional lumber mill!

@dustylumberco 4 ай бұрын

👏🙌

@SpartanONegative 4 ай бұрын

I need 1500 sq ft planks just like that. I live in Wisconsin. .1" thick preferred. I want to put in hardwood floors at my house. I enjoyed watching. Thank you for sharing with us. God Bless 🙏

@williampeeters7327 4 ай бұрын

.1" is around the thickness of 20 sheets of paper

@dustylumberco 4 ай бұрын

Awesome! Have fun

@eliasfarmer1219 4 ай бұрын

You could try Ocooch hardwoods, they're over in Richland county. I've ordered wood for smaller projects from them and it's always been really nice

@dougdavidson175 4 ай бұрын

Watched Donn DIY build his own mains powered Swing saw. Take care & stay safe in 2024.

@dustylumberco 4 ай бұрын

👍

@donklaser217 4 ай бұрын

Sweet!

@dustylumberco 4 ай бұрын

Thanks!

@IvanFazekas 4 ай бұрын

Dude will never have to buy precut lumber again. 😮

@dustylumberco 4 ай бұрын

👍😁

@onewayintospace 3 ай бұрын

🙏👉Пылесос надо приделать стружку собирать сразу)

@johnwhite993 4 ай бұрын

Wow!!!

@dustylumberco 4 ай бұрын

🙌👏

@white_devil73 2 ай бұрын

After being a filer for 15 years, it's nice to finally see what blades actually do.

@dustylumberco 7 күн бұрын

Awesome!

@geoffedwards189 4 ай бұрын

I swear I can smell the sawdust and chips!

@dustylumberco 4 ай бұрын

😁🙌

@Gardis72 4 ай бұрын

Dusty, I've recently discovered your videos. My late father was a master carpenter all his life and if alive, would appreciate your workmanship and quality. I am astonished at your versatility and ability to execute complex wood projects. Where did you get your training if you don't mind my asking?

@dustylumberco 4 ай бұрын

Thank you very much I am honoured. I am actually self taught. I did not go to school for this or take any classes other than shop class in high school 300 years ago. I learned in my garage and then shop by myself just seeing thing online and trying and made mistakes and learned from them 👍

@Gardis72 4 ай бұрын

@@dustylumbercoWell that makes your achievements all the more impressive. How does one get in touch if they want a custom built table, for example? Gardis - CT USA

@jorgej.vasquez7272 4 ай бұрын

Que belleza 👏

@dustylumberco 4 ай бұрын

😁👏

@fadi.abo-nada 4 ай бұрын

I Love It

@dustylumberco 4 ай бұрын

👍👍

@Donuts_random_stuff 4 ай бұрын

This is to satisfy How much kilos or pounds of sawdust does a big log like this generate???

@jbcardin 4 ай бұрын

Do the logs move much since they're not dogged down? We have a Mobile Dimension Saw and even dogging them down some of the bigger uneven, crooked logs want to move sometimes. Nice looking mill.

@dustylumberco 3 ай бұрын

They logs are wedged at the bottom

@asjfuall 4 ай бұрын

Is this fast? I work at a commercial saw mill and it's takes about a minute to process a tree that size as soon as it hits the first set of saws.

@nutsy1828 4 ай бұрын

A new saw for a new workshop 👍👍Happy new year Dusty. Keep up with the great work and fantastic videos

@dustylumberco 4 ай бұрын

Happy new year!

@user-hg9fp8tn2q 3 ай бұрын

Εξαιρετικό οπως ολα τα εργαλεια που χρησιμοποιεις

@robertnash2446 4 ай бұрын

Nice sawmill...but it looks a little dangerous....but I guess all sawmills can be dangerous.

@dustylumberco 4 ай бұрын

Absolutely

@kb3svj 4 ай бұрын

How long did it actually take to complete milling that log?

@BY-wb7og 3 ай бұрын

Stupid question, how thin can a sawmill cut a log? I have some trees i want to cut up and use as interior trim, i hate to waste them, theyre beautiful walnut trees. Thanks for your help

@gurkankaraali9608 4 ай бұрын

good very good

@dustylumberco 4 ай бұрын

🙌

@JAT922 4 ай бұрын

Will sure beat pushing the old one manually

@dustylumberco 4 ай бұрын

🙌

@txrick4879 3 ай бұрын

Wow i thougt i had seen every thing .

@dustylumberco 3 ай бұрын

👍👏

@robertpenn2152 2 ай бұрын

What’s the price difference between that blade and a carbide tipped bandsaw mill blade? And how often do you go through these?

@dwb468 4 ай бұрын

It’s not like it’s the whirling blade of dea…oh…my bad. 😮What a machine!

@dustylumberco 4 ай бұрын

👍👍

@kylehelmer3270 3 ай бұрын

What router motor are you running in your new router table setup?

@sozekeysersoze 3 ай бұрын

I’d hate to see that blade go flying without any guard on it 😬

@bendugas8632 4 ай бұрын

You will find this is going to be easy and more advantageous to you a rotary mill cuts square and straight way better than a band mill.

@dustylumberco 4 ай бұрын

I'm excited to add it to my shop 🙌👍

@karlmadsen3179 3 ай бұрын

Except for the appearance that it lacks safeguards and will be removing body parts from careless mill workers, it's a pretty amazing machine to watch.

@cardguys 3 ай бұрын

I wonder why the log doesn't become imbalanced and fall over

@dustylumberco 3 ай бұрын

There are wedges below holding it in place

@danvanhoose6783 4 ай бұрын

Pretty slick outfit.can it do quarter sawing?

@trimcarpentryorlandofla9101 4 ай бұрын

Wont trade my norwood hd 36 for nothing but this looks pretty cool

@dustylumberco 3 ай бұрын

👍

@johnnyho900 4 ай бұрын

That is an amazing tool! Is there any trick or attachment to be able to cut a full slab width?

@jackthomson73 4 ай бұрын

I think you would have to double cut from both sides so would be limited to roughly the width of the blade.

@dustylumberco 4 ай бұрын

You can saw 12x12 or even up to 24" wide. You can also produce one 'any' width slab per log by flipping it. There is also a slabber head that fits to the beam for up to 5ft width.

@johnnyho900 4 ай бұрын

@@dustylumberco That sounds great! I knew you’d know!!

@nakataardyyansyah4044 4 ай бұрын

Sir, can I learn about assembling furniture more professionally like you? . I only have manual tools in Indonesia.

@user-tk7xf9co2r 4 ай бұрын

I think you will be able to improve even more if you train further at Karimoku, a Japanese wood furniture manufacturer that has a large group of professional wood furniture craftsmen who are purveyors to the Japanese Imperial Family.

@dustylumberco 4 ай бұрын

🙌

@vrazlet9987 4 ай бұрын

Какой процент древесины уходит в опил?

@WeedMIC 4 ай бұрын

U should have quarter sawn it if you went to all that effort, imho.

@aaronsmith21 Ай бұрын

Without side supports, how do you keep the log from moving while it’s getting cut?

@dustylumberco 7 күн бұрын

There are wedges under it

@joshh5336 4 ай бұрын

Seems like a pike pole and a green chain for the off-fall would speed things up a bit. I like it

@eagleeye761 3 ай бұрын

show a quarter sawing process in next video... also... widest board limitation?

@dustylumberco 3 ай бұрын

You can saw 12x12 or even up to 24" wide. You can also produce one 'any' width slab per log by flipping it. There is also a slabber head that fits to the beam for up to 5ft width.

@Dredd2992 2 ай бұрын

That is incredible. But be careful guys. Adding automation to a machine like that makes me nervous admittedly.

@dustylumberco 7 күн бұрын

👍

@sherrypersinger7056 3 ай бұрын

Seriously, that thing is INSANE!!! Very cool!! I just got a new RYOBI saw 😅 JK!

@dustylumberco 3 ай бұрын

Awesome!

@Tom-hz9oc 3 ай бұрын

Will the green wood change how you build things? Or will it all be dried?

@dustylumberco 3 ай бұрын

It would be dried after this

@Tom-hz9oc 3 ай бұрын

@@dustylumberco I figured so, but I wasn’t sure if you had something that would blow our minds coming up!

@user-xe7ks9ks2v 3 ай бұрын

❤❤

@user-jz2rb4pt7j 4 ай бұрын

Круто 👍

@dustylumberco 4 ай бұрын

🙌

@myRefuge3710 4 ай бұрын

Wow

@dustylumberco 4 ай бұрын

👏👏

@tommylee85 4 ай бұрын

What's the use of this saw? If you cut those board out of freah wood, wouldn't they warp after time?

@Estwing22 4 ай бұрын

He should kiln dry it before he cuts boards out of it so they don't warp over time shouldn't he? 😉

@dustylumberco 4 ай бұрын

Yes the lumber will normally want to move and twist a bit when it dries. That is why boards are cut bigger to account for some movement and shrinkage and then when dry you can mill to the final dimension.