A "Not So Basic" Mobile Super Dust Collector Build?!

Рет қаралды 16,248

7 ай бұрын

Watch a basic (Harbor Freight) dust collector get transformed into a not so basic mobile super dust collector.
Like, Share, and Subscribe for more.
Parts and Pieces Resources:
Basic Dust Collector - www.harborfreight.com/power-t...
BRUTE 20 Gal. Round Vented Trash Can - www.homedepot.com/p/Rubbermai...
Super Dust Deputy Cyclone - a.co/d/7fGKHpZ
Wynn Environmental Filter 13R230NANO - wynnenv.com/products-page/cyc...
3/4", 1/2" Plywood - Home Depot
2"x4" lumber - Home Depot
Threaded Bucket Lids - www.homedepot.com/p/Bucket-Co...
5" Dust Collector Hose - a.co/d/8twHHT2
WoodRiver 5" Wire Hose Clamp -www.woodcraft.com/products/wo...
6" Dust Collector Hose - a.co/d/ae6EmTH
WoodRiver 6" Wire Hose Clamp - www.woodcraft.com/products/wo...
6" Self-adhesive duct collar - a.co/d/5O85aZn
5" Hose Coupler - a.co/d/5Z5GiMm
5" Duct Elbow - www.homedepot.com/p/Master-Fl...
5 Gal. Texas Flag Bucket with Foam Grip - www.homedepot.com/p/Leaktite-...
Frost King 5/16 in. x 1/4 in. x 17 ft. White D-Center EPDM Medium Gap Weatherseal Tape - www.homedepot.com/p/Frost-Kin...
Frost King 1-1/4 in. x 3/16 in. x 30 ft. Camper Mounting Tape for Trucks - www.homedepot.com/p/Frost-Kin...
Notable Tools:
Drum Sander Drill Attachment Set - www.homedepot.com/p/RYOBI-Dru...
Makita B-62103 10" 45T Carbide-Tipped Max Efficiency Miter Saw Blade - a.co/d/5XNZ8UX
Jorgensen 6 inch Bar Clamp Set, 4 Pack Steel F Clamp Light Duty, 300 lbs Load Limited, for Woodworking, Metalworking, DIY - a.co/d/e341Spp
UKNOW Safety Glasses - Anti Fog Lenses - Eye Protection with Side Shields - ANSI Z87.1 Protective Eyewear - UV Protection - a.co/d/dpduwT4

Пікірлер: 26

@davidswanson5669 13 күн бұрын

8:12 the way to get the lag bolts perfect is to take a pencil and draw the hole, using the metal leg (from the motor) as your stencil. You’d be drawing onto the wood bracket you just cut. You’ll of course need to scoot the motor away so that you can then drill the hole, but it’s the best way to place holes in critical spots.

@mikee7534 7 ай бұрын

Nice build here with legit advantages using readily available parts. Thanks for the instructional overview👍

@talleyrand2739 6 ай бұрын

nice build tip from an old joiner/builder remove that ring when working in the shop good way to loose a finger when lifting timber or can catch on something seen a few lost that way and once was the rule remove all rings when in the trade ,take or leave your choice but what i have is a life time of experience .,advice to any that may be watching .

@Lee.M.Easton 6 ай бұрын

Thanks for the advice 🙂

@davidmelton7268 7 ай бұрын

Nice work Lee! I really like the addition of the cyclone separator and better filtration of the exhaust air. Looks like it should do a good job for you...let us know how it works when you have it connected to your tools.

@damonmanni 2 ай бұрын

Excellent video all around Lee. well thought out, practical & easily reproducible. Also thank you for listing all the parts need. I will be applying our build to my shop. Looks to be about $1000 in costs + time+ materials. Q’s: 1) are there any loud vibration noises or rattling of the cabinet or components caused by the impeller when it’s running? Solving the decibel problem is important with DC. 2) do you know if the 34” filter comes in a smaller length as I have a space constraint? I poked around their site but no luck 3) can you provide a demo of it in action/performance to get a good feel for it? Cheers mate

@MichaelMassimino 4 ай бұрын

A+, fantastic upgrade

@Lee.M.Easton 4 ай бұрын

Thank you!

@bradboyer1381 3 ай бұрын

This is exactly what I was looking for--modifying the HF collector into a 2-stage system in a mobile base. With all due respect to the wall mount mod guys, it seems that the geometry of the HF guts requires using a corner wall. I simply don't have a corner like that available. Having said that, I may use your basic idea and mount it on some available wall space anyway.

@user-rk4zm3nb5f Ай бұрын

Nice project. If I might ask, what is the footprint of the cabinet? Length, width, height?

@WackeyWorxWorkshop 4 ай бұрын

Nice build. I also did something similar. 👍👍👍

@Tendo8002 7 ай бұрын

I like this build as it resembles the build im starting next year exept mine is going to be a corner cabinet. I hadn't considered using the casters but ill surely snag that idea. Is that cyclone large enoug for your fan? How many HP/kw on your fan?

@Lee.M.Easton 7 ай бұрын

Hi @Tendo8002, thanks for your question. This cyclone 🌀 is rated for 0.5hp to 3.0hp systems. My particular fan is a 2hp unit. Here is a link to the cyclone used in this video www.oneida-air.com/dust-deputy/dust-collector-kits/super-dust-deputy-4-5-inch-cyclone-separator

@Tendo8002 7 ай бұрын

@@Lee.M.Easton Thanks for the reply! I'm at 1,5hp so that sounds like a good cyclone for me! I'll give it a try and copy just the right amount from your build 😉

@jzahirniak 26 күн бұрын

I like your arrangement but it makes me wonder how much dust gets to the filter since you removed the OEM "separator" from the equation. I just have a canister in place of the filter bag on mine and I dont know how much those really do for the finer dust in reality. Judging by the amount of dust that gets in my filter I dont think it does much so probably wouldn't help to leave it in the system somewhere but I am still curious. Do you get much dust in the filter and its bucket? What is your routine for cleaning the filter?

@danimal29 6 ай бұрын

Great demonstration. I have a few questions: Is it still convenient to change out the filter of the canister when you need to? And are the latch clamps enough to keep the lid of the grey container secure? Also, do you get any collapse/imploding of the grey container from the suction when it's on? I'm definitely planning to do this but without the mobile enclosure.

@Lee.M.Easton 6 ай бұрын

Thank you @danimal29 :) Regarding the filter canister, yes I would say it is easy to disassemble when needed. With the latch clamps, yes, so far so good with those. The grey container has not imploded on me yet, even at full suction with my hand over the end of the hose. The container has behaved well. I did have to remove the self-adhesive gasket from the grey container, as the adhesive was not adequate and the seal squeezed away from the lip of the gray container. To fix this, instead applied foam camper mounting tape to the underside of the round plywood lid that contacts the gray container. I should have done that way in the first place. I'm going to see about doing an update video to advise of that change. I can talk about inspecting the Wynn filter canister too. Just let me know if you have any other questions. Thanks again, -Lee

@mattskionet 3 ай бұрын

Any issues with collapsing the can under cyclone?

@Alabama_deplorable 5 ай бұрын

Can you provide info on alcohol dispenser?

@Lee.M.Easton 5 ай бұрын

Hello, yes! It is one just like this from Amazon Biutee Cleaner Bottle Clear Bottle 1 PCS Push Down Empty Lockable Pump Dispenser Bottle for Nail Polish and Makeup Remover 200ml (1 PCS) a.co/d/eIuerIE

@mbernard2662 6 ай бұрын

*promo sm*

@Lee.M.Easton 6 ай бұрын

Thanks for the comment. What are you promoting so much?

@mlrable 7 ай бұрын

You should be nore prepared and more diligent. Try thinking of what yoy should do

@Lee.M.Easton 7 ай бұрын

Do you have any specific examples of where one could be more prepared and more diligent?

@DanChanPiano 2 ай бұрын

@@Lee.M.Easton Trolls can't spell, have no content of their own and derive pleasure from trying to irritate. Your video gave me great ideas. Absolutely no problem with your preparation, diligence and thought processes.