Overlocker Timing - Lower Looper Fix Janome Serger Repair

Overlocker Timing - Lower Looper Fix Janome Serger Repair - 8002D

Рет қаралды 17,788

3 жыл бұрын

Timing on an overlocker is a really easy fix and I show you the way to fix the lower looper in this video. For the Upper Looper and the Needle timing, You can watch the linked videos on my channel. All overlockers are basically the same - subscribe for more videos
Please support the channel with a thumbs up and comment to let me know what you think.
Your support is greatly appreciated here: Ko-fi.com/abis_den
Hey! ✨New to Abi's Den?✨This is a channel where keen creators meet new people, create projects together, and set ourselves exciting sewing challenges. Subscribe for more videos!
Where else you can find me or buy items I use in the videos:
🧵WEBSITE: abisden.wixsite.com/website
📸INSTAGRAM: / abis.den
💼OTHER INQUIRIES:
Please contact me using the link on my channel page.

Пікірлер: 25

@taniabouwer4551 2 жыл бұрын

Thanks for a great video, Abi. It helped me fix jammed loopers on my Janome 234D! I did not know the position they needed to be in and your detailed visuals showed me exactly how they should work.

@vdemoor9844 Жыл бұрын

Thank you you for showing this. I got my serger second hand. Finally figured out the last time it was serviced, they messed up the timing. Well, long story but it started with the needle bar and clamp and slowly but surely figured out it was off on timing for the upper and lower looper. As well as one of the tension discs. Ugh, this has been along road. Your video made it much more clearer to understand. Thank you so very much.

@AbisDen 9 ай бұрын

Glad I could help

@kc-il3xw 2 жыл бұрын

THANK YOU ABI!!! I found a great little serger and using your videos I was able to fix the timing and am serging away!!!

@charmainegarnham9722 2 жыл бұрын

Hi Abi! Not tried the timing as yet but definitely will be, I asked for a quote just to check thinking it’s would be around £50, nope it’s £80!! I will be having a try at repairing my own machines lol

@audreyh3809 3 жыл бұрын

Thanks again for a great repair video 👍

@tripler7708 5 ай бұрын

Thanks for the video. Just struggling to hear

@margyb7469 3 жыл бұрын

I want to know how you can use a sewing machine with a kitten around, my kitten won't let me see cause she wants to play with all the moving parts.

@annsutherland6553 2 жыл бұрын

I look see if it can be fixed seems when I look at it there nothing holding it on

@annsutherland6553 2 жыл бұрын

My Huck before needle come off can this be mended

@xuandiep3902 9 ай бұрын

Hello Abi, my left and right loop needle touch each other. how do I fix this problem? if I move them apart, then the right looper needle touch the 2 top needle.

@leedavis5958 3 жыл бұрын

Hi Abi. I'll still bring my machine to you as and and when. Love the new kitty. how old is she---- he. 😘👍

@AbisDen 3 жыл бұрын

It’ll be a pleasure to help. Bee? She is only just 12 weeks old. So still very little and very energetic

@MelissaNonnemakerSmale Жыл бұрын

Hi! My 134d has a bar in the way of the timing nut! I can’t get to it properly.

@MelissaNonnemakerSmale Жыл бұрын

I messaged you on Facebook.

@AbisDen Жыл бұрын

I don’t go onto Facebook but you could ring the manufacturer and ask for their advice, legally now companies have to honour your right to repair so they should provide you with support.

@laurencoles5650 Жыл бұрын

@@MelissaNonnemakerSmale hi I have the same model as you and a bar with an 18 on it is in the way How did you resolve please if you could help

@MelissaNonnemakerSmale Жыл бұрын

@@laurencoles5650 hi! I had to take the bottom off and get a wrench where the one side is a “circle” and the other is a “claw”. I used the second smallest size. I’ll get the proper info when I dig the tools back out! I came in at that nut from the front of the machine but needed the bottom off to angle it in there.

@ciberdark Жыл бұрын

How do I fix the upper looper timing? my upper looper is not in the right position, and hits the needles

@AbisDen 11 ай бұрын

Is it this machine you’re using?

@ciberdark 11 ай бұрын

@@AbisDen It's a mylock 204D, is really similar

@annsutherland6553 2 жыл бұрын

The stitch not coming through right place I not good at describing this to you

@AbisDen 2 жыл бұрын

I'm not understanding the problem. I don't have a tutorial for a Husqavarna

@inforestsweheal 6 ай бұрын

I tried fixing the timing of my serger and made it worse. I had to take it in for repair as a result. I don't recommend doing this, based on my personal experience. It just made it worse.

@AbisDen 6 ай бұрын

I suppose it’s like anything. Following instructions for a recipe or learning to drive a car. If you have the confidence to do it, then go for it, if not, get someone else to do it.