CVO Rear Fender Conversion by Advanblack for Harley Davidson touring models

Рет қаралды 170,225

Күн бұрын

Add the CVO style rear fender to your bagger with this color matched CVO fender conversion from www.advanblack.com This is a step by step how to on how to un install your fender and re install your CVO fender. Check them out here to see if they have your color. www.advanblack.com/harley-par...
SUBSCRIBE to Steven Housden's KZfaq Channel for free upgrade videos, reviews, how-to's & giveaways: / dpstudios. .
PLEASE COMMENT, LIKE AND SUBSCRIBE...IT HELPS ME KEEP THIS CHANNEL GOING FOR YOU GUYS AND I REALLY APPRECIATE IT!
FOLLOW ME!
Facebook - / stevenleehousden
Facebook Group SIK Baggers - / 427595487637128
Instagram - sikbaggers...
Twitter - StevenHousden?lan...
Steve's Favorite Motorcycle Must-Have Tools!
Master Hex/Torx Set - www.amazon.com/dp/B083Q5WZHS?...
Swivel Head Ratchet - amzn.to/3MYeMEw
Milwaukee M12 Ratchet - amzn.to/3VSR6W4
M12 Battery - amzn.to/3gweokl
M12 Charger - amzn.to/3Srrb53
Ratcheting Wrenches (Metric) - amzn.to/3CQanyS
Ratcheting Wrenches (SAE) - amzn.to/3Tt6iaY
Blue Medium Loctite (Your Bikes Best Friend) - amzn.to/3gwdK6p
FT LB Torque - amzn.to/3VON5SH
IN LB Torque - amzn.to/3F4wCUA
Vise Grip Plier Set - amzn.to/3TYZUs0
Motorcycle Funnel Set - amzn.to/3sP9HFz
Belt Tension Gauge - amzn.to/3FiiXco
Noco Boost Plus Power Bank/Jumper - amzn.to/3W1squO
As an Amazon Associate, I earn a very small commission from qualifying purchases. Thank you for your support and for helping our channel grow!
#sikbaggers #harleydavidson
🔴GET SOCIALISTIC
🔗Facebook Group SIK Baggers - bit.ly/38GRKgI
🔗Instagram - bit.ly/2HwBZge
🔗My LINKTREE - linktr.ee/sikbaggers
🎵All Music is Licensed Through www.epidemicsound.com
VIDEO DISCLAIMER:
This video is for educational purposes only. By watching and engaging with this content, you acknowledge and agree to the terms outlined herein. The information presented is for general educational purposes and does not constitute professional advice or create a professional-client relationship. Any actions taken based on this information are at your own risk. Neither the creator nor the channel shall be liable for any consequences of your actions. Exercise caution, use personal judgment, and seek professional advice when necessary. The content may not be accurate, complete, or up-to-date. You are responsible for complying with all laws and regulations in your jurisdiction. By continuing to watch, you release the creator and the channel from any liability. This disclaimer applies to all future content and interactions. Confirm your agreement by proceeding to watch.

Пікірлер: 186

@sikbaggers 6 жыл бұрын

This is definitely a different look from the extended fender and light bar. It seems some guys love it...some guys are digging the old way...tell me what you think!

@tru2lewis 6 жыл бұрын

Very clean look. But I'm digging the old school light bar.

@sikbaggers 6 жыл бұрын

Yes sir...I am really town between the 2 to be honest.

@tru2lewis 6 жыл бұрын

I got the stretched bags and fender extension from Advanblack. It looks really good.

@1bagger29 6 жыл бұрын

hey Steve the fender looks good don't get me wrong but I think the fender extension looks better with the chrome and everything back there and it fills it in a lot better too

@sikbaggers 6 жыл бұрын

Hey Richard! Agreed. I do believe I am going back to the fender extension. I like the way it wraps around the pipe better. And I like the chrome plate and blinker light bar. The CVO fender would be great for guys wanting to eliminate the blinker bar though. Adding a chrome plate like the one by Paul Yaffee really sets off too but I really like the wrap look better for me.

@goodbaduglybaggers6479 2 жыл бұрын

Hey my friend, I hope all is well. I just want to say thank you for all of your knowledge! Your videos have been a huge help to me. You’ve taught me so much my man, words can not express my appreciation!! Keep educating my friend!!

@sikbaggers 2 жыл бұрын

Thank you very much for the kind words sir. Its not often I get anyone who leaves a compliment...easier to complain about something then say thanks..So it means a lot ot me. Much appreciated!!

@hotrodhog639 5 жыл бұрын

You’re doing a great job getting ready to buy my bags and fender extension now for my Harley Davidson Road glide special I think it’s going to look beautiful

@sikbaggers 5 жыл бұрын

Thank you James...and you'll love it man..changes the whole bike really. Been running it for almost 4 years now and tons of complements everywhere we go. Thanks for checking out the channel and if you need anything, let me know.

@paulbrown895 4 жыл бұрын

Just purchased the new style cvo rear fender by advenblack ,very nice for sure! The one thing that it did not have that I needed was the 2 threaded studs to attach your cvo style front seat .it has the bolt hole already for the standard seat just no holes pre drilled for the front seat attachment.i don't mind it not having it I can still drill my own holes. But the new curved recessed license plate in the fender is very sharp and since I have the extended bags by them it all looks awesome

@sikbaggers 4 жыл бұрын

Thanks Paul...yers there were only 5 of those sold in pre order. We are working out the details for all bikes. This is a new product so were getting feedback from the guys who them. If you get a chance call me mon - fri 8 to5 cst on the advanblack service number from the advanblack page.

@mikeb3427 Жыл бұрын

Great video. I've watched it a bunch of times before installing my CVO style fender and bags. Have to say though, Taking the OEM fender out was not nearly as easy as you showed. Then putting the new one in was much easier after taking the cast fender strut covers off. Gave just enough clearance to pretty much drop the fender in the way you described. After that it was easy peezy and probably spent more time obsessing over the wiring than the fender. Thanks for the great video.

@sikbaggers Жыл бұрын

yes its a very old video.

@superduty131 6 жыл бұрын

Thank You ,thank you, thank you, for posting this so fast!! It looks great on there.

@sikbaggers 6 жыл бұрын

Hey Scott...thanks for checking it out. It looks identical to the CVO fender provided by HD. I was pretty impressed. ... It is for sure different look than the fender extension.

@superduty131 6 жыл бұрын

I like the look. Everything lines up nice and it gets rid of that ugly light bar. FYI Custom Dynamics has a nice curved lighted plate frame as well as Harley Davidson.

@sikbaggers 6 жыл бұрын

Ye sir I did forget about the CD one. I just seen it the other day. I think there may be a few more out there too. Definitely some choices and various price ranges.

@corymcdonell4300 6 жыл бұрын

Honestly I’m in love with the stock fender and the extension, because now if you look at the cvo you have big gaps for exhaust, when before it was clean and tight, I have a 09 and I just bought a 2010 fender to eliminate the big break light mine has and bought the advan black extension, been waiting on that Now in primer for 3 weeks now.

@sikbaggers 6 жыл бұрын

Yeah I think the guys running the 4.5 and 5" exhaust will dig this more. There is a noticbale gap at the fender extension ...Ill get the chrome on today and see how that goes...still up in the air for sure.

@michaelmcinteer5029 4 жыл бұрын

Well done. Some good detail in your explanations. Am I seeing that correctly? Looks to be a large gap (over an inch) between the fender filler brake light panels and the bags.

@goodbaduglybaggers6479 2 жыл бұрын

Thank you for your knowledge my friend. I’ve learned so much from your channel.

@sikbaggers 2 жыл бұрын

Thank you...glad to have helped! Watched your bearing video..pain in the as arent they? lol

@uniquebindingforunibindsup559 5 жыл бұрын

Hi Steven. Will these be made with orange turn signal leds suitable for the Australian market?

@corymcdonell4300 6 жыл бұрын

Witch rear do you like better the cvo or the factory with extended render

@PalmBeachRon561 6 жыл бұрын

Steve, how can I order this same kit in Vivid Black?

@4everDCOOL1 6 жыл бұрын

Steve I have stock 2012 Electra glide classic, will this fender fit my bike

@RydinginStyle72 4 жыл бұрын

When I plugged in my wiring harness all I am getting his parking lights no brake lights or turn signals do you know why this would possibly be? Is it possible I have the plugs plugged in backwards on the lights or something thanks

@Dobber227 2 жыл бұрын

I have a 19 electra glide standard with the center brake light and side turn signals. Is it possible to rewire mine to use these cvo style lights? I haven't been able to determine if that would work or not.

@paulpotempa8829 3 жыл бұрын

Can put this fender on my 15 cvo Rg with short bags? Will the half circle of the exhaust cut outs come up to the bottom of the short bags? Will it look good or a mess?

@briandchris7061 3 жыл бұрын

it is a very nice product. I bought it for my special road glide. For me there are three problems all the same. First of all. In Europe, the indicators are orange. Everything on this product is red ... it does not comply with European regulations. Secondly When the turn signal is on, braking is not signaled at the same time! Third, the cable is glued along the mudguard (on the inside). With the heat it peels off all the time.

@997sPorsche06 5 жыл бұрын

Do you guys still sell this fender. I don't see it on your web site.

@joestreetglider 6 жыл бұрын

Hi Steve another great video. Will Advan black make these CVO fenders for earlier years models SG’s

@sikbaggers 6 жыл бұрын

Thank you Joe...There is an older version in the works..but I cannot say how long it will be. There are a few new parts coming out soon that are ahead of that but i'll keep you updated with that for sure as soon as I know more. For sure in the works already though.

@Viper385_2A 5 жыл бұрын

Has anyone connected a Custom Dynamics Magic Strobes brake light flasher on this fender? I am wondering if the LED lights on this fender still work with the strobe module from Custom Dynamics.

@amyhall6742 Жыл бұрын

We just installed love the look but break lights are staying on no change when you actually use the break how can we troubleshoot this

@chrisherrera303 2 жыл бұрын

Love your vids Steve, except I don't see these for a 2013 street glide

@johnmeshell4698 10 ай бұрын

Will the CVO Fender fit on a regular Ultra Classic?

@frankthomas67 3 жыл бұрын

How can I reach you I want to add a fender extension to my 11 ultra limited I know that I will have to drill holes in my fender I just need to know which one to purchase that will fit the bike

@17brixton 6 жыл бұрын

It didn’t show how he ran the wire harness? Where do the side indicator wiring clamp to? Any examples?

@semperfi1566 Жыл бұрын

I have a 21 RGL is the process the same? Great video thank you in advance

@sikbaggers Жыл бұрын

yes..09 to 22 are the same

@GunzGonda 2 жыл бұрын

Love it, will it ever come in an international (amber turn signal) version?

@sikbaggers 2 жыл бұрын

Not with this style light unless its a switch back style light...this light acts as the brake and turn signal and its all red.

@SuperOutlaw07 5 жыл бұрын

I have been looking at several bags and fender kits and most of them look like the cut outs do not line up with the fender and the bags. Yours look like they line up perfect. Thoughts / comments? And than you very much your video and description is very informative., great job.

@sikbaggers 5 жыл бұрын

well with this set up it takes some tweaking...youre putting a cvo rear fender with stretched bags...if you want a cleaner look get the bags and the fender extension.

@BlackJack-xz1sy 10 ай бұрын

I done been through 2 wiring harness. I like the video I wish you would show exactly how you ran the wires.

@sikbaggers 10 ай бұрын

It goes right in the fender between the tire and the fender...HD's harness is exactly the same and its not a ideal. I run them down the fender, making sure itis very clean first. The stick it. THEN add black gorilla tape over the whole harness from front to back. I actually add a couple of layers.

@tsadkiel2008 2 жыл бұрын

Man it seems like you came a long way since this video!

@sikbaggers 2 жыл бұрын

Yes...im very grateful for the subscribers that have followed along since back then...I just seen 2017 on this video..man doesn't seem that long for sure.

@clarker1911 4 жыл бұрын

Do you have a P/N for the Apes?

@andrewarnold7405 4 жыл бұрын

Will this be available again in the near future I have ordered several times from Advanblack and i would like this setup to be next . Any time frame and would this fit a FLHR 2014

@sikbaggers 4 жыл бұрын

I dont think at this time they plan on bringing this one back. We had a few left over and sold them but we are designing a newer version...not even sure on the release date of that at this time.

@Adamatthebeach007 4 жыл бұрын

Will you be making a version for Canadian bikes that need the Center tail light on the fender?

@sikbaggers 4 жыл бұрын

not at this time im sorry Adam

@pbarre79 2 жыл бұрын

Hi Steve, At the end of the install you said we should make sure there is enough slack for the LED license plate light to plug in so it can illuminate. However, I don't recall you mentioning where this needs to be plugged in. Is this a separate plug in from the black plug you said we have to plug in for the CVO lights?

@sikbaggers 2 жыл бұрын

yes there is single plug that comes off the two side lights that is for the plate light. So on your harness you will have 2 larger plugs for the lights and one smaller one for the plate.

@marcmo7138 6 жыл бұрын

Hey Steve great job on your videos, I subbed. Is the CVO fender metal? Thanks

@sikbaggers 6 жыл бұрын

Thank you! Yes the cvo fender is metal and the fascia is abs plastic ....its an identical match the HD CVO fender.

@marcmo7138 6 жыл бұрын

ok thanks

@TheScoonDogg 6 жыл бұрын

Maaaaaaan Santa Claus is definitely getting the link to this video ;)

@sikbaggers 6 жыл бұрын

Hahha Nice man. I hope you get it!

@rolandos64 Жыл бұрын

Does the replacement fender use the original BRACKET,RR FNDR SBAG SUPRT? The shoe horse that goes under. Behind the facia and into the saddlebag supports?

@sikbaggers Жыл бұрын

Yes it will use it

@clebervieira2542 6 жыл бұрын

Love the videos... suggestion on this videos we can only see the full view in frame for about 1.5 min(14:53 to 15:09) would be nice to see it without the tourpak....Im debating between the skirt or the cvo fender but it seems the gap around the exhaust is bigger on the CVO vs the Skirt....... Great looking bike thx fo the videos...

@sikbaggers 6 жыл бұрын

Hello Cleber! Thanks for checking it out. Yes the skirt on the cvo is quite different around the exhaust area vs. the extended fender. This would be great for the people running large exhaust like the Vance and Hines Monster 5.5" exhaust. Plenty of room around the pipes. They both have their own unique qualities for sure. Ill try to get some pictures and link to you of it without the tour pack.

@jaronmitchell8801 8 ай бұрын

@@sikbaggers i know im late to this but ive got a 2020 RGS and im torn between the CVO fender and the dominator. im running tab 4.5 with stock stretched bags ( will move to 4.5 bags once fender is changed) would like to see more pics or vids of the cvo fender with 4.5 bags

@bayarea6464 6 жыл бұрын

how do the look with stock bags non cvo style do they line up

@sikbaggers 6 жыл бұрын

They line up pretty decent with stock bags..the best fit is with extended bags for an over all finished look.

@billharden7127 6 жыл бұрын

Good video.

@sikbaggers 6 жыл бұрын

Thank you Bill

@JNMIII-xh1xb 6 жыл бұрын

Does the Custom Dynamics Magic Strobe work with the fender LED lights ?

@sikbaggers 6 жыл бұрын

yes sir. Because the plug on the end of the harness is the same as the one you take off of your bike , you just plug it in just like you had it. This plug goes in to the magic box socket and then plug the MB socket into your bike.

@Misty3133 Жыл бұрын

This is the video that I’ve been looking for,thanks! My left CVO light is glitching a bit. I’m not sure if it’s the plug or the light.

@sikbaggers Жыл бұрын

Sorry I missed this comment! Did you get it figured out?

@Misty3133 Жыл бұрын

@@sikbaggers yes I did thanks. I worked the plug in and out several times as well I checked the pins,it’s working fine now. Headed to Bike week now,Thanks for responding!! 👊🏾

@LUCKY-mo5ex 5 жыл бұрын

So if you remove the inten how are you going to pick up radio stations etc.??

@sikbaggers 5 жыл бұрын

relocate it ...check out my videos here...2 options. kzfaq.info/get/bejne/mLNjgJST1Na5pnU.html

@marcobattista3952 2 жыл бұрын

Hello, may I know where you have relocated the antenna?

@sikbaggers 2 жыл бұрын

hd hidden fairing antenna is the best

@louisvecchio3249 2 жыл бұрын

Hi I just purchased a 2017 road king special. I was curious if this fits on my bike and also if the contour of the fender matches the stock fender. Thanks

@sikbaggers 2 жыл бұрын

Its a direct replica of the cvo fender from HD...and yes it will fit any touring model 2009 and newer.

@louisvecchio3249 2 жыл бұрын

@@sikbaggers awesome thanks for the immediate response! In my attempt to add the lights but also maintain the rear appearance of the bike would you suggest doing the fender/fascia combo or just the fascia with the lights?

@terrydalme2885 4 жыл бұрын

How about putting a fender extension on a 2019 electraglide standard

@sikbaggers 4 жыл бұрын

Hey Terry I have a video on a install on a road king...check it out as its the same principle for your electraglide. The road kings, ultras and electraglides dont come with the fender extension but you can add one...the video will at least show you what you need to do as far as mocking it up, drilling and then you will need to hard wire in a tri bar light at the bottom. If you have any questions let me know...more than happy to help kzfaq.info/get/bejne/d8qlq9eQr8XYfqM.html

@Glennozrx 4 жыл бұрын

What did you do with the antenna mount?

@jamesh1865 3 жыл бұрын

Hey Steve, could you answer this question please

@lexrabel5145 5 жыл бұрын

Does this fender reuse the lower bracket that bolts to the stock non-cvo fender and rolls out to where the fender/saddle bag supports meet? I saw you pull it off stock fender, didn’t hear anything else about it. Thanks man

@sikbaggers 5 жыл бұрын

aahh yes..sorry man this is a very old video...I will be doing another new one soon on the new updated fender we have coming out. But yes you use the bracket.

@lexrabel5145 5 жыл бұрын

I figured so. I got rear ended. Got a fender ordered, just making sure i have all the parts needed to install when it shows up. Thanks for getting back with me so fast

@Turn1Rob3000 6 жыл бұрын

Hey Steve i saw in one of your videos you had stretched side covers, are they on advanblack? I'm about to order those bags and cvo rear fender color matched and i would like to get the those stretched fenders.

@sikbaggers 6 жыл бұрын

Turn1Rob3000 hey man.. Well they are advanblacks first prototype. We have since re designed them 3 times to get a better fit. I think we nailed it this time and we are waiting for the molders to get them done. I've heard 2 weeks a couple of times from the molders now so I just wait at this point. We will let everyone know the day they are released and they will be on the website.

@Turn1Rob3000 6 жыл бұрын

Steven Housden ok! Can I preorder them? I’m kinda wanting to pay for everything together

@sikbaggers 6 жыл бұрын

Im sorry man but not at this time...We dont have anything listed as of right now.

@gumby754 6 жыл бұрын

I wish we , could see this bike outside of the garage on display,

@sikbaggers 6 жыл бұрын

I plan on doing a walk around video outside soon.

@Jalalmop 3 жыл бұрын

I can put 2014 rear finder on 2013 turing ?

@sikbaggers 3 жыл бұрын

yes, the fender will fit down to an 09 but the wire harness that comes with a 2014 up fender will not work on a 13 down

@andycarswell72 5 жыл бұрын

do they make a CVO rear fender for a 12 street glide ?

@sikbaggers 5 жыл бұрын

The Cvo fender fits 09 to 19..however u need the wire adapter for the 09 to 13. We don't have it listed yet but it done..you can call advanblack and request the adapter

@tomthetruckguy5283 4 жыл бұрын

Awesome video! Went online to place an order for the rear fender but didn't see it. I'm assuming that the fender is sold out?

@sikbaggers 4 жыл бұрын

We are currently out of stock on the cvo fender...we are making more.

@tomthetruckguy5283 4 жыл бұрын

@@sikbaggers thank you for the info.

@tomthetruckguy5283 4 жыл бұрын

Is there an approximate time line when it will be available again?

@gabriel24br 2 жыл бұрын

Can you replace the red ligh with a smoke? If yes how much?

@sikbaggers 2 жыл бұрын

We offer smoked and red lenses but its the entire sealed light..you cannot swap the lens but you can swap the lights. In the midle of this page you can see smoked or red lenses and prices www.advanblack.com/parts/harley-parts/harley-light-sound.html?p=2

@davidrutherford1100 4 жыл бұрын

Steve, does the harness all go inside the fender and the plug comes out the hole in top of fender? you gorilla tapped all of them to the inside??? thanks

@sikbaggers 4 жыл бұрын

yes sir...it runs up along the inside of the fender just like harleys does...I add the gorilla tape for extra measure and yes...I run it across the entire length of the wire and secure it to the fender.

@davidrutherford1100 4 жыл бұрын

@@sikbaggers ok, i installed mine but tire must have rub it and ripped one side out. grrrr...re-ordered plug and more gorilla tape. thanks for reply.

@dewaynedewayne9734 6 жыл бұрын

Steve can you show or explain what's needed to connect the license plate lighting? When I received my fender it was just two exposed wires and a plug on the harness Thanks for any assistance

@sikbaggers 6 жыл бұрын

oh...they sent me one like that too..but mine was a prototype wiring harness. They have the plugs for the plate light now. It would simply just snap in to the harness end like it is now. I will contact becker to get you a plug. Can you email me at slhousden@gmail.com and ill keep in touch with you there.

@dewaynedewayne9734 6 жыл бұрын

Thanks i just sent you an email

@milootis50 4 жыл бұрын

So just to confirm this DOES come with plate lighting correct? Thank you!

@marcmo7138 3 жыл бұрын

@@milootis50 Yes

@StopThe_Violence 2 жыл бұрын

Will this fit an 06 street glide?

@sikbaggers 2 жыл бұрын

no, from 93 to 08, the bikes were thinner and shorter...you will have to look for a fender that fits 93 to 08

@24sevvin 6 жыл бұрын

Dont see this on their site anymore? Are they still selling them?

@PalmBeachRon561 5 жыл бұрын

Steve, where can I guy this!!!

@RadioRahim01 5 жыл бұрын

Couldn't find these on the site.. are they still available??

@sikbaggers 5 жыл бұрын

As of right now they are pulled. We are redesigning the cvo fender with a more custom look and better LED lights.

@hd18rgs93 Жыл бұрын

Had mine since I bought my bike back in 2018, starting to notice some cracks in it!? I’m guessing from the vibration from the wind while riding? Has this happened with other customers?

@sikbaggers Жыл бұрын

Not that im aware of..I have not received any calls from anyone on that issue. ...where is starting to crack?

@hd18rgs93 Жыл бұрын

@@sikbaggers On the metal fender where the light bar goes it’s cracking right on the corners outward

@Jalalmop 4 жыл бұрын

We need for 2013

@bayarea6464 6 жыл бұрын

is this part good quality how is customer service with advan are you gona keep it on bike or switch back to the other fender

@sikbaggers 6 жыл бұрын

It is the same quality thickness as your oem bags. Nice and sturdy. Paint is always dead on too. One thing I can tell you is advans customer service is one of the best. You have an issue...they fix it. Some of the best guys I have worked with. I am waiting on the new chrome license plate bracket from paul yaffe for this cvo fender..I think I will know better then If I am going to keep it on there or not. Just have to replace the plastic bracket on there now..doesnt do much for me.

@bayarea6464 6 жыл бұрын

You took fender back off when will u put back on to give a review of how the last with time being that they are abs

@sikbaggers 6 жыл бұрын

Yes I put the extension back on with stock fender. I did take the cvo fender off but we have several customers running it. I have been running the fender extension for almost 2 years now with no issues.

@rockinjohnny1199 3 жыл бұрын

I see how you installed this Fender, but I just need to ask a question. I'm having difficulty with a different aftermarket rear Fender on my 2013 Electra Glide. The company that manufactures the Fender told me that I need to remove the Fender struts, install the rear Fender to the motorcycle, and then re install the Fender struts. They said that was basic knowledge for anyone that works on a motorcycle. Now that doesn't make sense to me because doesn't the rear Fender get mounted TO the Fender struts? If you remove the Fender struts, there's nothing to mount the rear Fender to, right or am I just crazy? I just want to be able to show them all the comments that come in telling me I'm not the crazy one. Lol

@newmoney8128 Жыл бұрын

I like the videos I just wish the camera angles were a lot better because once I get my stuff off I have to guess what it is that he was talking about

@sikbaggers Жыл бұрын

yeah i need to do a new one...this one is pretty old...sorry

@user-qo1wr1ki5z Жыл бұрын

I installed the rear fender & now have no running lights?

@sikbaggers Жыл бұрын

what year is your bike?

@medinafrench908 6 жыл бұрын

Where did you get your extended side covers?

@sikbaggers 6 жыл бұрын

Prototypes from advan black....we are in the process of making the molds now...no idea how long that will be but were getting closer to production.

@medinafrench908 6 жыл бұрын

Steven Housden Good I would like to get a set to match my extended fender and extended bags I got from them. Will you put up a video when they are available?

@jasonmckinney6444 5 жыл бұрын

Hey Steve has advanblack stopped offering these cvo fenders? I can’t find them anywhere.

@sikbaggers 5 жыл бұрын

yes as of right now we have pulled the fender and are re doing the lights and wire harness...much brighter lights coming..also working on stretched version of this fender so it will match the cut out on the bags better

@jasonmckinney6444 5 жыл бұрын

Steven Housden sweet! Hopefully you guys will have it all worked out soon. Im chomping at the bit. I’ve got a 2018 RGU it would also be nice if you guys had a stretched rear fascia that didn’t have the tribar light. But one that looks like the cvo piece without the side lights. I just don’t like the chrome tip on mine and would like the fender to stretch down further and then use the stretched saddlebags. I would have to plug two holes after removing the chrome top though.

@TheDemetrius2685 4 жыл бұрын

Can't find on the website is the CVO style rear fender still available?

@sikbaggers 4 жыл бұрын

we are coming out with a better version that matches the bags better than the CVO fender...still lights i the side and extended but we are out of stock on this one and the new one will be out soon so we probably wont make any more of these for now.

@TheDemetrius2685 4 жыл бұрын

@@sikbaggers I have a 19 Road King Special and was looking forward to buying when i had the dough. No worries I'll just wait for the next release you guys make. Bonneville Salt Denim please 🤘

@gearedupproduction8290 3 жыл бұрын

This only works with HDs with the touring pack?

@sikbaggers 3 жыл бұрын

The fender is HD, yes, but has nothing to do with tour packs..its a fender

@gearedupproduction8290 3 жыл бұрын

@@sikbaggers that’s what I figured but just wanted to be clear

@texasincolorado 6 жыл бұрын

As for quality, would you keep it on your bike?

@sikbaggers 6 жыл бұрын

yes I would as far as quality. Its identical to the HD CVO at about half the price. I have installed some HD CVO ones and I wouldnt be able to tell the difference if you told me any different. This one just wasnt my style. I switched back to the extended fender with tri bar light.

@texasincolorado 6 жыл бұрын

Steven Housden thanks, that was quick lol

@valentefrank1 4 жыл бұрын

Can you put a cvo 2014 up fender on a 2006 street glide

@sikbaggers 4 жыл бұрын

Im sorry but no..the 08 down models have a much more narrow rear end so you need to find a fender that fits a 2008 down.

@valentefrank1 4 жыл бұрын

Steven Housden thank you for getting back to me

@4everDCOOL1 6 жыл бұрын

per Avant black cvo fender will work with 2012 touring bikes, however wiring harness will be needed..jarzproducts.com/index.php?id_product=41&controller=product

@tru2lewis 6 жыл бұрын

Can we expect side panels and tank shrouds from them in the near future?

@sikbaggers 6 жыл бұрын

There are side panels coming very soon. They are in development right now. Will be test fitting a set very soon. Not sure on the tank shrouds or stretched tanks just yet. Could be a wrap fender coming after the side panels.

@tru2lewis 6 жыл бұрын

Cool. Thanks

@Viper385_2A 5 жыл бұрын

@@sikbaggers Any word on that wrap fender?

@sikbaggers 5 жыл бұрын

@@Viper385_2A Not yet...I actually just ordered a wrap fender from wanaryd and its at paint now. Im not sure when the advan fender will be out.

@armandw6744 4 жыл бұрын

Can you roll the fender off without having the bike on a stand?

@sikbaggers 4 жыл бұрын

that would be pretty tough...if you loosen the two bolts ( one on each side) that hold the rear struts to the frame it will allow the frame to separate more and you can squeeze it straight out but I dont think you can roll it very far with it on the floor.

@armandw6744 4 жыл бұрын

Thanks