Рет қаралды 94,902
The Bambu Lab X-1 Carbon is a pretty loud 3D printer, and the Chamber Fan is a big part of that. Let's replace the Chamber Temperature Regulator Fan on the Bambu X-1 for a Noctua 92mm fan! Along with that my X-1 Carbon is replaced
-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
www.mandicreally.com/links
-----------------------------------------------------------------------------------------------
Parts Used (Affiliate Links):
*** Bambu Lab X1: tinyurl.com/BambuX1Carbon
*** Noctua 92mm PWM Fan: amzn.to/3i6I9cN
*** Noctua 40mm Fan: amzn.to/3DFoOXC
*** Buck Converters: amzn.to/3G3hg1o
*** Printable Buck Converter Mount: social.thangs.com/m/55313
*** Polymaker Filament: tinyurl.com/Polymakerr
-----------------------------------------------------------------------------------------------
Filmed with (Affiliate Links):
*** Main Camera: bhpho.to/3RStTnz
*** Main Lens: bhpho.to/3FhSfjc
*** Video Recorder Monitor: bhpho.to/3RW0Yii
*** Action Camera: bhpho.to/45CS10Q
*** Wide Angle Lens: bhpho.to/3RXQXBj
*** Slider: bhpho.to/3ZRRIhi
*** Studio Microphone: bhpho.to/3PUL3yb
*** Voiceover Microphone: bhpho.to/46uECsE
*** Monopod: bhpho.to/3PT2yir
*** Tripod: bhpho.to/3PSKXY4
*** Primary Lighting: bhpho.to/3RXSmb3
*** Additional Lighting: bhpho.to/3RXVfsf
*** RGB Lights: bhpho.to/46S6VBn
*** Drone: bhpho.to/476GGr1
-----------------------------------------------------------------------------------------------
Timestamps:
0:00 - Intro
0:44 - Warning!
1:12 - The Noctua Fan
1:48 - Chamber Fan removal
2:32 - Buck Converter
3:35 - Chamber Fan Reinstall
4:10 - Wiring "Diagram"
5:17 - Mainboard Fan Replacement
5:56 - Bad Design?
6:55 - Chamber Fan Before & After
7:26 - ONE Problem!
8:36 - Chamber Temp & Filter?
11:09 - Parts List
11:25 - Outro
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
#3dprinter #bambulab #mandicreally